Currency:
802.11AC / AX WiFi solution

WLE600VX - i 7C Industrial-grade (85°C) 802.11ac Dual band Radio miniPCIe QCA9892 module

WLE600VX - i 7C Industrial-grade (85°C) 802.11ac Dual band Radio miniPCIe QCA9892 module

$66.00

In stock

SKU: WLE600VX - i - 7C

WLE600VX - 7C Industrial Grade (85°C) Dual Band 2×2 802.11ac miniPCIe Module


Availability confirmed for end Sept 2022 now! Pre-orders are required.


Qualcomm Atheros QCA9892 - Industrial Grade Chipset


• 2.4GHz max 21dBm & 5GHz max 18dBm output power (per chain)


• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n


• 2x2 MIMO Technology, up to 867Mbps


• Mini PCI Express edge connector


• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)


• Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards • Supports Dynamic Frequency Selection (DFS)


• Cards are individually calibrated for Quality Assurance


• Supports 4.9GHz operation


Certification :
CE (!) 0678, FCC, IC Canada (7849A‐WLE600VX) , TELEC certified (Japan -reg.no.JU000537H - R 206-00537)

Description

Details

WLE600VX - 7C Industrial Grade (85°C) Dual Band 2×2 802.11ac miniPCIe Module

KEY FEATURES

Qualcomm Atheros QCA9892 - Industrial Grade Chipset

• 2.4GHz max 21dBm & 5GHz max 18dBm output power (per chain)

• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n

• 2x2 MIMO Technology, up to 867Mbps

• Mini PCI Express edge connector

• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

• Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards • Supports Dynamic Frequency Selection (DFS)

• Cards are individually calibrated for Quality Assurance

• Supports 4.9GHz operation

Specification Table:


Product Type Wireless Module
Chipset QCA9892
Wireless Standard 802.11n, 802.11g, 802.11b, 802.11ac, 802.11a
Wireless Speed 867Mbps
MIMO Channels 2×2
Output (Per Chain) 21dBm
Interface 1x MiniPCI-e Pin
MiniPCI-e Pin v1.1
Power Consumption 3.5 Watts
Temperature Range Operating: -40ºC to 85ºC*, Storage: -40ºC to 90ºC
Humidity Operating:5% to 95% (non-condensing)
Certification CE, FCC, RoHS Compliance
Dimension (W x H x D) 50.95 x 30 x 3.2 mm
*The wireless module can operate up to 90ºC. However, for long term reliability, it is recommended that a 20ºC safety margin be maintained.

WLE600VX-itemp Datasheet

 

WLE600VX-itemp 2x2 MIMO Dual Band 802.11ac MiniPCI-e Module

WLE600VX-7C Industrial Grade

Dual Band 2x2 802.11ac Industrial Grade Module
  • Qualcomm-Atheros QCA9892
  • 2.4GHz max 21dBm output power & 5GHz max 20dBm output power (per chain)
  • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
  • Operating temperature range:-40 C to 85 C*
  • 2X2 MIMO Technology & up to 867Mbps
  • MiniPCI Express 1.1 interface
*The module can operate up to 90ºC. For long term reliability, a 20ºC safety margin should be maintained.
Compex Bridge Issue 27 Summary

Our QCA9890 MiniPCI-e Wireless Module has a Higher Output Power than our competitor, 21dBm vs 18dBm 

 
Find out how our Industrial Grade QCA9890 Wireless Module perform when compared with our competitor
ModelCompex WLE900VX-itempCompetitor S QCA9890 Module
Chipset QCA9890 QCA9890-BR4B
Host Interface PCI-Express 1.1 Standard PCI-Express 1.1 Standard
Antenna Connector 3 x U.FL 3 x U.FL
Standards 802.11ac/a/b/g/n 802.11ac/a/b/g/n
Operating Temperature -40ºC to 85ºC*;
*The module can operate up to 90ºC.
For long term reliability, a 20ºC safety margin should be maintained.
-40ºC to 85ºC;
Operating Humidity 5% ~ 95%
(Non-Condensing)
10 ~ 85%
(Non-Condensing)
Dimensions 50.95 x 30 x 3.2mm 50.8 x 29.85 x 3.95mm
Tx channel width 20/40/80MHz 20/40/80MHz
Certification FCC, CE None
RF Perfomance (Per Chain)
11a@54Mbps 17dBm ± 2dBm 15dBm ± 2dBm
11b@11Mbps 21dBm ± 2dBm 18dBm ± 2dBm
11g@54Mbps 18dBm ± 2dBm 15dBm ± 2dBm
802.11gn HT20 MCS7 16dBm ± 2dBm 13dBm ± 2dBm
802.11gn HT40 MCS7 16dBm ± 2dBm 13dBm ± 2dBm
802.11an HT20 MCS7 16dBm ± 2dBm 13dBm ± 2dBm
802.11an HT40 MCS7 15dBm ± 2dBm 12dBm ± 2dBm
802.11an HT80 MCS9 14dBm ± 2dBm 10dBm ± 2dBm
11a@54Mbps -80dBm ± 2dBm -73dBm ± 2dBm
11b@11Mbps -94dBm ± 2dBm -92dBm ± 2dBm
11g@54Mbps -80dBm ± 2dBm -75dBm ± 2dBm
802.11gn HT20 MCS7 -77dBm ± 2dBm -72dBm ± 2dBm
802.11gn HT40 MCS7 -75dBm ± 2dBm -72dBm ± 2dBm
802.11an HT20 MCS7 -77dBm ± 2dBm -70dBm ± 2dBm
802.11an HT40 MCS7 -75dBm ± 2dBm -68dBm ± 2dBm
802.11ac HT80 MCS9 -68dBm ± 2dBm -57dBm ± 2dBm
Model: WLE900VX-itemp

 

LINUX users :

customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.

 We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE600VX modules 



Certification :
CE (!) 0678, FCC, IC Canada (7849A‐WLE600VX) , TELEC certified (Japan -reg.no.JU000537H - R 206-00537)

OUR key PRODUCTS

WLE1216V5-20 5GHz / WLE1216V2-20 2,4GHz

QCA9984 MU-MIMO 4x4 WiFi Module
• TX Power 21dBM per chain
• standard miniPCIe size
• CE/FCC certified
• max Rx Specification Sensitivity - 95dBm
• up to 1730 Mbps 5GHz / 800 Mbps 2,4GHz
• industrial grade version available -up to 85C

WLE900VX  / WLE600VX dualband

• QCA9880/9882 11ac dual band WiFi Module
• TX power 21dBM per chain
• available with 2x2 / 3x3 MIMO
• standard miniPCIe size version
• CE/FCC/IC Certified
• max Rx Specification Sensitivity -95dBm
• up to 1300 Mbps (3*3) / 867 Mbps (2*2)
• industrial grade version available -up to 85C

WLT674 M.2 combo module

• QCA6174A-5 MU-MIMO 2x2 dual band
• WiFi + BLE 4.2 M.2 Module
• TX power18 dBm per chain
• CE/FCC/IC certified
• max Rx Specification Sensitivity -76dBm
• up to 867 Mbps

WSD377 DIO SMT combo modue

• QCA9377-3 MU-MIMO 1x1 dual band
• WiFi + BLE 4.2 SDIO Module
• TX power18 dBm per chain
• CE/FCC/IC certified
• max Rx Specification Sensitivity - 97dBm
• up to 433 Mbps

Additional

Additional Information

Brand COMPEX
firmware https://www.compex.com.sg/wp-content/uploads/2018/11/WLE600VX-I-7C-85C-v3.1-WH-219.pdf

Tags

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews

  1. test with Marvell SOC boards - all works well ! Review by paul
    Value
    Quality
    Delivery time
    Price

    I received the pacakge today, and have already tested a WLE600vx on Debian ARM and OpenWRT Marvell SOCs.!
    With OpenWRT 18.06.02 and the ath10k driver, with an update of the firmware get from https://github.com/kvalo/ath10k-firmware/tree/master/QCA988X/hw2.0/10.2.4-1.0
    All works really great and the WiFi access point (EsspressoBIN Board) is fine and well working now.

    So simple, thanks with this first test ! (Posted on 4/2/2019)

WRITE YOUR REVIEW

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Having a questiion ?? Contact us - info at 524wifi.com !!