Currency:

MU-MIMO ac Wave2 solution

802.11 ac Wave2 miniPCIe modules and router boards. New MU-MINO WiFi5 solution !!

Position
Set Descending Direction

Grid List

15 per page

Items 1 to 15 of 28 total

Page:
  1. 1
  2. 2
  1. Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

    $149.00

    Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

    DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Planar Antenna 

    ■  2 x 2 MIMO 5G Antenna

    ■  5G: 16dbi

    Available for orders, lead time is 2-3 weeks.

    Learn More
  2. ZBT Link Z2101AX-D Gigabit Ports WIFI 6 Mesh ROUTER, MT7621A processor, MT7905D+MT7975D WiFi chipset, 802.11n/g/b/a/ac/ax,High speed up to 1800Mbps

    $69.00

    Z2101AX-D Gigabit Ports WIFI 6 Mesh ROUTER

    WiFi 6 home router, which can access the Internet through WAN port, and then share the Internet through wireless WiFi 6 and 1000Mbps wired LAN.

    Relevant standards and specifications:

    • USB3.0/USB2.0 Bus Standard

    • IEEE802.11n/g/b/a/ac/ax

    • IEEE802.3/802.3u/802.ab

     Main features of the product

    1).Support IEEE 802.11ax/ac/n/11b/g standard.

    2).1*WAN+3*LAN 10/100/1000Mbps ports.

    3).1* USB 3.0 data interface.

    4).High speed 1800Mbps,dualband and gigabit ports.

    5).Support MESH automatic networking.

    Learn More
  3. 524WiFi WiFi6 2400-2500 / 4900-7125 MHz 2×2 MIMO Directional Dual Band Panel Antenna 10 - 13 dBi, 2×N Female connector, mounting kit, 524WiFi-TPC-2472-13D

    $48.00

    524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

    Model: 524WiFi-TPC-2472-13D

    Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

    This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

    • Operated at 2400-2500 , 4900-7125MHz frequency band
    • True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
    • V/H dual polarization,
    • Directional antenna for outdoor point to point applications
    • Pole mount for outdoor installation
    • UV Protected ABS antenna housing for weatherproof
    • Dimensions: 205×180×45mm
    • 2×N Female connector
    • IP55 rain and dust resistant

    Learn More
  4. 524 WiFi 6 / 6E 2400-2500 / 4900-7125 MHz 2×2 MIMO Omnidirectional Dual Band Outdoor Antenna 4 - 6 dBi, 2×rSMA connector, mounting kit, 524WIFI-TOF-2472-6BV

    $55.00

    524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

    Model: 524WiFi-TOF-2472-6BV

    Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

    This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

    • Operated at 2400-2500/4900-7125MHz frequency band on each port
    • True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
    • Two independent vertical antennas in a single housing
    • Outdoor pole mount installation
    • Rugged UV Protected PVC antenna housing
    • Dimensions: Φ128×220 mm
    • 2×RP-SMA male connector with 3m cable
    Learn More
  5. 524 WiFi 6 / 6E 2400-2500 / 4900-7125 MHz 3×3 MIMO Omnidirectional Dual Band Outdoor Antenna 4 - 6 dBi, 3×rSMA connector, mounting kit, 524WIFI-TOF-2472-6CV

    $58.00

    524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

    Model: 524WiFi-TOF-2472-6CV

    Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

    This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

    • Operated at 2400-2500/4900-7125MHz frequency band on each port
    • True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
    • Two independent vertical antennas in a single housing
    • Outdoor pole mount installation
    • Rugged UV Protected PVC antenna housing
    • Dimensions: Φ128×220 mm
    • 3xRP-SMA male connector with 3 m cable
    Learn More
  6. 524 WiFi 6 / 6E 2400-2500 / 4900-7125 MHz 4×4 MIMO Omnidirectional Dual Band Outdoor Antenna 4 - 6 dBi, 4×rSMA connector, mounting kit, 524WIFI-TOF-2472-6DV

    $59.90

    524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

    Model: 524WiFi-TOF-2472-6DV

    Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

    This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

    • Operated at 2400-2500/4900-7125MHz frequency band on each port
    • True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
    • Two independent vertical antennas in a single housing
    • Outdoor pole mount installation
    • Rugged UV Protected PVC antenna housing
    • Dimensions: Φ128×220 mm
    • 4xRP-SMA male connector with 3 m cable
    Learn More
  7. Dream 5018 S 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys

    $89.00

    DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

    Samples are available now!

     11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

    Features:

    Dual-core ARM 64bit A53@1.0GHz Processor

    512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

    2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

    Support BT5.1

    M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

    M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

    POE 802.3 bt,at,af support

    Support Openwifi

    Product Description

    DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

    Learn More
  8. Mediatek MTK 7621 High performance Outdoor router H721 O, Dual SIM with 5G NR LTE-A & WiFi possibility, 1x LAN 1x WAN, 4x antena 1x M.2 USB3, 1x MiniPCIe, good outdoor enclosure, OpenWRT

    $169.00

    Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

    After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

    https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

    https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

    Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721O 5G NR outdoor version now includes:

    • outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

    Hardware: 

    MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    1x M.2 b.key USB 3.0 as 5Gnr interface,

    1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

    2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

    Lightning protection design

     Heat sink at botoon of 5Gnr modem

    NEW X-WRT firmware available !!!

     

    Learn More
  9. Dream 5018 M 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys

    $89.00

    Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

    Samples are available now!

     11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

    Dual-core ARM 64bit A53@1.0GHz Processor

    1G DDRL3L System Memory

    8MB NOR Flash, 256MB NAND Flash

    2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

    M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

    M.2 Card Slot for QCN9074 WIFI 6E Card

    M.2 Card Slot for QCN6122-6E Card

    M.2 Card Slot for QCN6102-5GCard

    Support Openwifi

    DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card. 

    Learn More
  10. Dream 6122-6E 524WiFi WiFi6E 802.11ax 2x2 MU-MIMO 6GHz QCN 6122 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!

    $29.00

    Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module

    Works only with IPQ Dream 518 boards, can not be ordered separately.

    Features - Qualcomm Atheros QCN6122  6GHz, max 23dBm per chain, up to 2402Mbps  Single Band 6GHz 2x2 WiFi 6E (802.11ax)  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

    Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    Learn More
  11. Dream 6102-5G 524WiFi WiFi6 802.11ax 2x2 MU-MIMO 5GHz QCN 6102 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!

    $22.00

    DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module

    Works only with DR518 boards, can not be ordered separately.

    Features - Qualcomm Atheros QCN6102  5GHz, max 23dBm per chain, up to 2402Mbps  Single Band 5 GHz 2x2 WiFi 6E 802.11ax  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

    Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    Learn More
  12. DR-AP6018-A WiFi 6 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR6018 (IPQ6018) Board 802.11ax, dipole Antennas, enclosure, Wallys, OpenWRT

    $165.00

    Description

    DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

    QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

    Learn More
  13. DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys

    $139.00

    Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

    ■ SMA Plug interface ■ Plastic rod of black

    ■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

    Dimension: 132x 119 x 34 mm

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Learn More
  14. 5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE

    From: $115.50

    To: $2,749.67

    Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

    New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  15. Wallys DR-AP4029 Indoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 + 5GHZ omni 4 / 6dBi antennas

    $125.00

    MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

    Description

    DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

    Onmi Antenna 

    ■  2 x 2.4G&5G Antenna

    ■  PCB Antenna

    ■  2.4G: 4dbi ;5G: 6dbi

    Enclosure

    ■  Dimension: 220x 220 x 42.54mm

    ■  UV Protected and Durable ABS Radome

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Learn More
Position
Set Descending Direction

Grid List

15 per page

Items 1 to 15 of 28 total

Page:
  1. 1
  2. 2