Currency:

Gateways & 4G 5G LTE Routers

Gateways & 5G / 4G LTE Cellular Routers and modem modules with LTE-A support , CAT 16, CAT12, CAT6, CAT4 and new CAT20 supported !!

Position
Set Descending Direction

Grid List

15 per page

Items 1 to 15 of 42 total

Page:
  1. 1
  2. 2
  3. 3
  1. Mediatek MTK 7621 High performance Outdoor router H721 O, Dual SIM with 5G NR LTE-A & WiFi possibility, 1x LAN 1x WAN, 4x antena 1x M.2 USB3, 1x MiniPCIe, good outdoor enclosure, OpenWRT

    $169.00

    Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

    After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

    https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

    https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

    Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721O 5G NR outdoor version now includes:

    • outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

    Hardware: 

    MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    1x M.2 b.key USB 3.0 as 5Gnr interface,

    1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

    2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

    Lightning protection design

     Heat sink at botoon of 5Gnr modem

    NEW X-WRT firmware available !!!

     

    Learn More
  2. 4G LTE router ZBT WG3526 MT7621 880MHZ 1200Mbps 5x1GB 1xUSB 3.0 1×SIM 1×SD 1× SATA 3.0 IEEE802.11AC/N/G/B/A SDK 4.2

    $59.00

    WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB
    3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card ,1× SATA 3.0 and so on

    Wireless:
    Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be
    1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger.
    Software:
    Preload the OpenWRT.
    Original SDK based on the Linux platform SDK 4.2, including 80.211ac, IPv6, and Win8
    certification, providing VPN software, audio and touchscreen driver supports. L7 QoS can
    cooperate with the internal hardware acceleratos HNAT/HQoS perfectly, providing Auto QoS for
    Internet router and SMB router.

    With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

    Learn More
  3. DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi

    $89.00

    IPQ 4019 / 4029  Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board

    • Featuring with industrial-grade IPQ4019/IPQ4029 chipset 
    • Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module 
    • Support 4.940GHz to 5.825GHz Frequency Range
    • Support 2.400GHz to 2.482GHz 
    • Support 2 x 5G MMCX Connectors and 2x2.4G MMCX 
    • Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth 
    • Support 11ABGN/AC 
    • RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
    • FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
    • Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
    • USB 3.0 support ! miniPCIe LTE-A module supprted !
    • Support Openwifi  Support QSDK  Support Openwr

    • Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!

    Learn More
  4. Quectel RM500Q-AE 5G NR global module 3GPP Release 15 NSA/SA operation, Sub-6 GHz M.2 socket

    $229.00

    5G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA

    This version is replaced by newer version RM502Q-AE , please use this newer better version
    Quectel RM500Q is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel. 15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM500Q is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 module EM12 and Cat 16, Cat 18, Cat 20 module EM20, which will facilitate customers to migrate from LTE-A to 5G.
    5G NR
                        : 3GPP Release 15 NSA/SA operation, Sub-6 GHz
    NSA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79
    SA Bands    : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79
    DL 4 × 4 MIMO  n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/n78/n79
    UL 2 × 2 MIMO  n41
    LTE
    LTE Category      DL Cat 16/ UL Cat 18
    LTE Bands           B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/ B25/B26/B28/B29/B30/B32/B34/B38/B39/B40/B41/B42/ B43/B46(LAA)/B48/B66/B71
    DL 4 × 4 MIMO    B1/B2/B3/B4/B7/B25/B30/B32/B34/B38/39/B40/B41/ B42/B43/B48/B66
    UMTS
    WCDMA Bands  B1/B2/B3/B4/B5/B6/B8/B19
    Embedded GNSS Supported
    PCIe 3.0 Interface Supported
    USB 3.1 Interface Supported
    eSIM Supported / Built-in eSIM (optional)
    Region Global
    Certification in progress: Carrier: AT&T*/ T-Mobile*/ Verizon*/ NTT DOCOMO*/ Telstra* Regulatory: GCF*/ PTCRB*/ CE/ RCM/ IC*/ FCC*/ JATE*/ TELEC*
    Learn More
  5. 5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE

    From: $115.50

    To: $2,749.67

    Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

    New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  6. 5G antenna 40dBi LTE 4G 5G Wide Band Full Range 600 - 6000 MHz High Gain signal boost WDS7795G SMA male, 524wifi

    $18.00

    5G NR frequency range - 600 - 6000MHz

    Gain - 40dbi

    VSWR - 1.5

    Polarization - vertical

    input impendance - 50Ω

    Max power 50W

    Beam width - omni directional

    connector - SMA Male

    color - black

    antenna total size - H:20, W:4.5, T:1 cm operation temperature - -40°C to 80°C Radome material - ABS 

    Learn More
  7. MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT

    $99.00

    Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.

    The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G version 7 now includes:

    • 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) . 
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
    • Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  8. DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys

    $139.00

    Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

    ■ SMA Plug interface ■ Plastic rod of black

    ■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

    Dimension: 132x 119 x 34 mm

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Learn More
  9. DR-AP6018-A WiFi 6 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR6018 (IPQ6018) Board 802.11ax, dipole Antennas, enclosure, Wallys, OpenWRT

    $165.00

    Description

    DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

    QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

    Learn More
  10. LTE 5G M2 NGFF to type-C USB 3.0 dongle for most M.2 interface 5G modules, GT5G-CV

    $49.90

    GT5G-CV M.2 NGFF TO Type-C USB 3.0 dongle - total New design for latest 5Gnr M.2 Modems  

    Key Features
    Compatibility is strong - Compatible with most M.2 interface 5G modules
    Industrial - Industrial grade material design
    USB Type-C 3.0 - USB Type-C 3.0 high speed interface

    Compatible with most M.2 interface 5G modules
    Special shield cover protection design to protect key devices from external force damage, corrosion aging
    Nano SIM Card slot
    No driver required, plug and play
    Led indicators let you know your connection status immediately

    Learn More

    Out of stock

  11. ZBT WE1026-5.8G Vehicle Wireless 4G LTE Router , dual ban WiFi 2,4 + 5GHz, can support Quectel miniCPIe LTE-A modules

    $59.99

    WE1026 is a dual band 3G/4G Wi-Fi router (3G / 4G gateway) specially for Vehicles using. LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06. It has1 LAN port, support 802.11 a/b/g/n/ac and 3G/4G. This device has Wide Area Network VPN tunnel, Local Area Network Wi-Fi security authentication, 4G/3G and watchdog functions etc, to achieve wireless LAN seamless connection, automatic network redial to provide users with high-speed, secure, reliable mobile broadband services.It has a USB 2.0 data interface, a MICRO SD (TF) card interface, with larger storage function.

    This device with metal case and vehicle anti-interference design, to achieve excellent anti-interference performance. Also it uses vehicle power supply design, support 9V~28V Car power supply,can effectively prevent equipment damage from vehicle’s power fluctuations, it offers a wonderful solution for vehicle Wi-Fi such as bus Wi-Fi,car Wi-Fi, train Wi-Fi, taxi Wi-Fi etc. This device also widely used in Wi-Fi coverage project like Bus station, the Airport, Sea port etc. At the same time, it is also widely used in scenic where Wi-Fi coverage and other public places where Wi-Fi coverage of the Internet.

    • Special for Vehicles using;
    • Complies with 802.11b/g/n/a/ac. wireless protocol;
    • Support dual band 2.4G and 5G wifi signal + support 3G/4G at the same time;
    • LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06.
    • Support 4G / 3G watchdog function, automatic network redial.
    • Can be dialed through an external USB interface (need to mount USB 3G/4G Dongle )
    • Support GPS function (depending on 3G/4G module)
    • Support to automotive power 12V and 24V systems, the minimum operating voltage is 9V, the maximum operating voltage is 36V. The maximum can be withstand 174V duration 150ms surge voltage, meet to 5a, 5b standard of the car protection.
    Learn More
  12. mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, USB 3.0 port, Rooter and OpenWRT firmware supported

    $69.90

    Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

    Max. LAN Data Rate: 867Mbps

    Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

    Wi-Fi Supported Frequency: 2.4G & 5G

    Wi-Fi Transmission Standard: 802.11ac

    Wired Transfer Rate: 10/100/1000Mbps

    2.4G Wi-Fi Transmission Rate: 300 Mbps

    Encryption Type: WPA-PSK

    Function: FireWall, QoS, VPN

    LANPorts:4 WAN Ports:1

    USB 3.0 port: 1 included

    Certification: FCC CE

    5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

    Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs),  Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

     

    Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1USB+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

    Learn More
  13. 524 LTE pure 5G Whip4 Antenna 617-960 / 1710-3800 / 4900 - 6000MHz 4dBi 5G Swivel hinged SMA LTE male Connector

    $9.99

    Pure 5g Whip4 4dBi 4G/5G Rubber Duck Stubby Antenna 600-6000MHz

    21,5cm lenght

    5G NR: n41/n77/n78/n79   ( Tested module :MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

    Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

    LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

    600-6000MHz

    ≤2.2 / 4DB / 50Ω / 50W / Length 21,5CM

    Learn More
  14. 524 LTE pure 5G 4x4 MIMO OMNI Outdoor Antenna 617 - 6000 MHz 4dBi 4G/5G 4xSMA LTE male Connector, global

    $59.00

    Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz


    Model: 524LTE-TOF-0660-4DV-1

    Electrical Specifications
    Frequency-MHz 617-960/1710-3800/4900-6000
    Gain-dBi 2.5 / 3.5 / 4
    VSWR <2.5
    Polarization Vertical
    Horizontal Beam Width 360°
    Vertical Beam Width 60°
    Impedance 50 ohms
    Max. Input Power 50W
    Lightning Protection DC Ground

    Mechanical Specifications
    Connector 4×SMA male
    Cable 1 meter RG405
    Dimension Ø132*220 mm
    Weight 1.2 kg
    Mounting Mast Ø30-Ø50 mm
    Radome Material UV PVC
    Rate Wind Velocity 210km/h
    Operating Temperature -40°C - +65°C

    Learn More
  15. 524 LTE pure 5G Magnetic Mount 4G/5G Antenna, 617 - 6000 MHz, 4dBi, 3m cable, SMA male connector

    $14.99

    Pure 5g 4dBi 4G/5G  Magnetic Mount Antenna 600-6000MHz with 3m sable, SMA male connector

    16cm lenght

    5G NR: n41/n77/n78/n79   ( Tested module :MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

    Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

    LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

    617-960/1710-3800/4900-6000 MHz

    ≤2.2 / 3-4DBi / 50Ω / 50W / Length 16CM

    Learn More
Position
Set Descending Direction

Grid List

15 per page

Items 1 to 15 of 42 total

Page:
  1. 1
  2. 2
  3. 3