Description
Details
The Wodaplug ® H721 Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra Wireless EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform).
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G version 7 now includes:
- 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM500Q , RM502Q, RM510Q, RM520N and Sierra wireless EM919x EM7690 in USB 3.0 mode.
- Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
- H721 does not support mmWave function !
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
1x M.2 (NGFF key B) slot USB3.0 support 5 Gbit/s bandwidth (5GNR for 5G network and UTMC GMS 3G 4G LTE etc.)
1x MiniPCIE (UTMC GMS 3G 4G LTE ) slot USB2.0 support 480Mbit/s
1x Minipcie slot for primary WIFI (support 3.3V and 5V wifi card)
1x Minipcie slot for secondary WIFI (only support 3.3V wifi card), this slot can be shared as Usb2.0 modem slot.
4 x lan+1 x wan 10/100M/1000M RJ45 port
1 x TF card slot
14 x led for display more information.
12 x antenna hole for future use total
H721 v5G support DC 12-24V
+ SIM slot ESD protection. Independence Power regulator for LTE and WIFI slot ,Industrial voltage regulator wide range input 5V ~ 27V, Solid capacitor be adopted. Metal case for heat conduction.
Detachable Wireless (Wi-Fi) Overview - 802.11ac/n QCA9880 600/900 VX module recommended
H721 Router provider 2 x Mini PCIE interface for wifi, The current Router firmware has preloaded 9K and 10K wifi driver, support all Qualcomm AR and QCA series Mini PCIE wifi card (do not support any wifi card mixed with bluetooth)
We have tested following wifi card already : AR9280 AR9287 AR9382, QCA9880 QCA9882
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Software:
We use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman Has made firmware for this board.
support most ROOTer function, support most LTE modem drivers(sierra wireless,Quectel,Huawei,ZTE,Meig)
We have tested: Quectel RM500Q RM502Q RM505Q RM510Q RM520N EC25E EC25A EC20 EM06 EM12
sierra wireless EM(MC)7355 EM(MC)7455 EM7430 EM7565 EM7511 EM919x EM769x , MeiG SLM750 (TA) , ZTE ME3760 ME3860
H721 does not support mmWave function !
Add 9K and 10K drivers for all QCA and AR wifi card router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
Source code and firmware download address: http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
NEW X-WRT firmware available !!! https://downloads.x-wrt.com/rom/ (and found Dual-Q H721)
================X-WRT RELEASE NOTES===========================
Attention - X-wrt default IP address is http://192.168.15.1/ username admin password admin.
Default X-WRT information: SSID:X-WRT_XXXX. SSID Password:88888888.
We made a video about H721 new firmare webui, https://www.youtube.com/watch?v=ZLI1FhQUHBc
firmware download link: https://downloads.x-wrt.com/rom/ (and found Dual-Q H721)
1 - New firmware has support AW7916 / AW7915 wifi 6 modules. Do not support QCN wifi 6.
2 - It supports RM520N-GL. X-WRT soft engineer use RM520N . You need manual create new interface (QMAP cellular) and manual choose AT port to display modem signal information
3 - New fw has introduce new Quectel QMAP , it will reduce cpu load.
4 - Full support hw-nat,
5 - Support dual-lte or 5G modem load-balance (see instruction.)
The modem signal luci is still in development.
Special FEATURES:
Connection MonitoringConnection Failover ( for 2 SIM cards at one time)Load Balancing (for 2 SIM cards bonding at a time)Network StatusSMS MessagingThe Miscellaneous PageFeatures to Help Debug Modem Problems
For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html
New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html
Specifications
Main Chipset |
MTK7621 / Dual-core / 880MHz , board HW version 7 |
RAM |
DDR3 256MB (Expandable to 512MB) |
FLASH |
SPI Flash 16MB (Max 32MB) |
Wi-Fi Protocol |
IEEE802.11ac, IEEE802.11a, IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u |
Wi-Fi Rate |
5GHz: 1300Mbps Max, depend on your wifi card 2.4Ghz: 450 Mbps depend on your wifi card |
Antennas |
5 x 5dBi (Wi-Fi) detachable |
Interfaces |
1 x 10/100M/1000M WAN Port, Auto MDI/MDIX4 x 10/100M/1000M LAN Port 1x M.2 (NGFF key B) slot USB3.0 support 5GNR/LTE 1x miniPCIE (NGFF Key B) slot USB2.0 support LTE 2 x mini PCIe slot for wifi 1x mini PCIe slot for Modem(Shared with 1 wifi slot) 1 x SD card slot 2x SIM card slot (esd protection) |
LED |
LTE A,SigA,LTE B,Sig B, TF, WIFI A,WIFI B PWR, SYS, WAN , LAN 1/2/3/4 |
Button |
1 x RESET |
Power |
DC 12V 2.0A adapter, H721 v5G support DC 12-24V |
Power Consumption |
< 12W (without wifi card) |
Dimensions(L*W*H) |
Router: 180MM (7.08ft) x 105MM (4.13ft) x 23MM (0.90ft)PCB: |
Management |
IP: 192.168.1.1User Name: admin Password: admin |
Uses |
LTE Router |
WAN Type |
3G/4G/LTE/5GNR,PPPoE, Dynamic IP, Static IP, |
DHCP |
Server, Client, DHCP Client List, Address Reservation |
Port Forwarding |
Server, Client, DHCP Client List, Address Reservation |
Operating System |
OpenWRT, LEDE/ROOter |
Firewall Security |
Client filterMAC Address Filter URL Filter Long-distance WEB management |
DNNS |
Supported |
Bandwidth Control |
Supported |
Static Router |
Supported |
System Logging |
Supported |
Web UI Themes |
Supported |
Other Functions |
Breed preload Multi-Wan Load Balancing (2 x SIM card bonfing supported) SMS Messaging |
Work Environment |
Operating Temperature: 0℃ ~ 60℃ Storage Temperature: -40℃~ 80℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 10%~90% non-condensing |
Certifications |
CE, FCC, RoHS |
Included Accessories |
3 x 5dBi 5Ghz SMA detachable Wi-Fi antennas 2 x 5dBi 2.4GHz SMA detachable Wi-Fi antennas 5 x ipx to sma pigtail for wifi 2 x 4dBi detachable LTE Omini antenna 2 x ipx4 to sma-RP pigtail for LTE 1 x Power Adapter 12V DC 6 x Screws/Spacers for mini PCI-e modem card installation Router case colors may vary from photos |
Dimensions(L*W*H) |
Router: 197mm (7.75ft) x107mm (4.2ft) x 34mm (1.34ft
Packaging: 240mm (9.4ft) x 195mm (7.6”) x 70mm (2.7) |
Weight |
Router: 0.8 KG (1.76 LBS)Packaged: 1.4 KG (3.07 LBS) |
Default WiFi passwords - for older firmare version it was "12345678" , new Rooter firmware version use "rooter2017" as default WiFi password.
NEW X-WRT firmware available !!! https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin
================X-WRT RELEASE NOTES===========================
Attention - X-wrt default IP address is http://192.168.15.1/ username admin password admin.
Default X-WRT information: SSID:X-WRT_XXXX. SSID Password:88888888.
We made a video about H721 new firmare webui, https://www.youtube.com/watch?v=ZLI1FhQUHBc
firmware download link: https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin
1 - New firmware has support AW7916 / AW7915 wifi 6 modules. Do not support QCN wifi 6.
2 - It supports RM520N-GL. X-WRT soft engineer use RM520N . You need manual create new interface (QMAP cellular) and manual choose AT port to display modem signal information
3 - New fw has introduce new Quectel QMAP , it will reduce cpu load.
4 - Full support hw-nat,
5 - Support dual-lte or 5G modem load-balance (see instruction.)
The modem signal luci is still in development.
Additional
Additional Information
Brand | Wodaplug.com |
---|---|
firmware | http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/ |
Tags
Reviews
We recommend
-
EM12-G EM12GPA-512-SGAD Quectel LTE-A M.2 - optimized LTE advanced 3 x CA Cat 12 Module ( global ), 5G+ ready
$99.90
-
Quectel RM500Q-AE 5G NR global module 3GPP Release 15 NSA/SA operation, Sub-6 GHz M.2 socket
$229.00
-
524WiFi 600VX ProPlus 2x2 MIMO 802.11ac Mini PCIe Wi-Fi Module, Dual Band, 2,4GHz / 5GHz QCA 9880 advanced edition
$39.90 As low as: $34.00
-
524WiFi 900VX ProPlus 3x3 MIMO 802.11ac Mini PCIe Wi-Fi Module, Dual Band, 2,4GHz / 5GHz QCA 9880 advanced edition
$45.00 As low as: $39.00
-
5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE
From: $115.50
To: $2,567.40
Having a questiion ?? Contact us - info at 524wifi.com !!