WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB
3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card ,1× SATA 3.0 and so on

Wireless：
Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be
1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger.
Software：
Preload the OpenWRT.
Original SDK based on the Linux platform SDK 4.2, including 80.211ac, IPv6, and Win8
certification, providing VPN software, audio and touchscreen driver supports. L7 QoS can
cooperate with the internal hardware acceleratos HNAT/HQoS perfectly, providing Auto QoS for
Internet router and SMB router.

With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

QCN9074 WIFI 6 11AX 4X4 WIFI MODULE - Pine Series WiFi Module:

Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E ! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth! DR9074-5G(PN02.1) based on QCN9074 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 5GHz Single Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

DR9074 5G and 6E modules are available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices! 

WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE  Pro+ MODEL PN02.1

524WIFI 600VX ProPlus is tweaked advanced edition based on XB140 reference design from the QCA for QCA9880 chipset. XB140 is a dual band 802.11ac design. New module version for 2021-22 ! 524WIFI 600VX ProPlus / 900VX ProPlus changes the FEM, power, some RF circuit and layout. Ath10k driver supported. Available now in stock !

Please reffer to comparition protocol to see exact  improvements and real numbers. ProPlus means we tweaked the FEM, that is because we always work with the Skyworks; we added the power, we changed the RF and the layout for massively higher performance and drastically lowered working temperature, and we did many tests for it. Please chek our test reports in below links. Specially Designed for higher volume of clients & heavy loads. Tested and aplied in mass transport systems (pls reffer already working cases or send email to us for exact already working cases). CE RED , UK CA, IC Canada and FCC certified and full test reports available! FCC 4,9GHZ Certified for US!

Do you like our WiFi radio modules and want to test samples ? No problem ! Please contact us and provide your project description!

We supply wireless Wi-Fi data and 4G 5G LTE modules worldwide. There is no continent, where we would not have a satisfied customer! Yes, we have already supplied our Wi-Fi modules in Antarctica! You can find our modules, for example, in wind turbines, drones, ships, aircraft, both civil, acrobatic and military… on land, on water and in the air. NASA has also ordered samples, so the next goal is to get them into the outer Space!

524WIFI 900VX ProPlus is tweaked advanced edition based on XB140 reference design from the QCA for QCA9880 chipset. XB140 is a dual band 802.11ac design. New module version for 2021-22 ! 524WIFI 900VX ProPlus / 600VX ProPlus changes the FEM, power, some RF circuit and layout. Limited quantity available now in stock ! WPA3 supported in latest OpenWRT.

Please reffer to comparition protocol to see exact  improvements and real numbers. ProPlus means we tweaked the FEM, that is because we always work with the Skyworks; we added the power, we changed the RF and the layout for massively higher performance and drastically lowered working temperature, and we did many tests for it. Please chek our test reports in below links. Specially Designed for higher volume of clients & heavy loads. Tested and aplied in mass transport systems (pls reffer already working cases or send email to us for exact already working cases). CE RED , UK CA, IC Canada and FCC certified and full test reports available! FCC 4,9GHZ Certified for US!

Do you like our WiFi modules and want to test samples ? No problem ! Please contact us and provide your project description!

We supply wireless Wi-Fi data and 4G 5G LTE modules worldwide. There is no continent, where we would not have a satisfied customer! Yes, we have already supplied our Wi-Fi modules in Antarctica! You can find our modules, for example, in wind turbines, drones, ships, aircraft, both civil, acrobatic and military… on land, on water and in the air. NASA has also ordered samples, so the next goal is to get them into the outer Space!

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware)  - this version is EOL, please use version 7 now !

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

-------Tis device is EOL, please use newer version - LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design ---------

M.2 (NGFF) Key B to USB3.0 " USB DONGLE type " adapter nano metal box 119x69x21mm with 1 Sim Card Slot for 5GNR M.2 Quectel RM500Q RM510Q SIMCOM8200 and others 52mm length 5GNR modem cards 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G etc

USB stick means this device is USB3 to NGFF M.2 Key B for use behind a PC or router via a USB port (plug&play) 

Main features: - Full-speed USB 3.0 data speed (4.8Gbps) - SIM card and USB ESD protection - add new Voltage regulator

- High-quality current inductance and Solid capacitor （1000μF）
- Additional Power supply connector Introduce.
- Aux Volt input support 5V
- Metal body case conduct the Heat.
- Mounting Hole for Flat or Mount.

V4 version - New feature:

A - Use new Power IC ,more stable than previous version.

B - addd New USB ESD protection,

C - 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)

D - adjust output to 3.8V，Prevent high data transfer voltage drop.

E - adjust AUX input  (5V~12V)

It's 5Gnr  version, support New 5G M.2 size (52cm length） with 6 antenna hole 

The adapter uses a full sized SIM Card . Two MHF4 to SMA female bulkhead (1.13 cables) pigtails (to connect the M.2 modem to the antennas) are included.

The USB 3.0 A Male to Micro-B Male plug provides a durable and solid connection to the enclosure. The data power cable is 40cm long .

USB3.0 (4.8Gbps) boasts of providing Ten Times the capability of USB 2.0. It also provides 900mA power as opposed to 500mA utilized thru USB 2.0. Type A connectors are are backwards compatible to USB 2.0 and/or USB 1.1. 524wifi.com

The enclosure is also equipped with an extra Micro USB power port for applications where additional (dual) power is required.

Aux DC input 5V input and 3.6V 3A output for M.2 device, use industry voltage regulator and capacitance to make 5GNR & 4G LTE modem work stable.

Sim slot with ESD protection

The enclosure can used on a desktop or mounted to a wall.

The metal body case is good for heat radiation, pocket size 119x69x21mm , cable lenght 400mm

The USB3 to NGFF M.2 Key B adapter enclosure is a useful device for connecting a 1pc 4G LTE M.2 （42mm modem lenght card） or 1pc 5GNR NGFF M.2 52mm length modem card ( 5GNR M.2 modem Quectel RM500Q RM510Q simcom 8200 and 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G ) behind a PC or router via a USB port. please note, 5GNR or 4G lte M.2 Modem is not included, you have to buy separately

xPON ONU Wodaplug ® FD504G-X-R410 4GE port, with EPON / GPON autodetect 

FD504G-X-R410 dual-mode ONU is one of the XPON optical network unit design to meet the requirement of the broadband access network.It apply in FTTH/FTTO to provide the data, video service based on the XPON network.

FD504G-X-R410 dual-mode ONU supports EPON and GPON two modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON or EPON adaptive access.

FD504G-X-R410have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. Itfully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.

SC/UPC single mode single fiber 

GPON：FSAN G.984.2 standard, Class B+ 

EPON：1000BASE-PX20+ symmetric 

GPON：2.488Gbps/1.244Gbps downstream/upstream 

EPON：1.25Gbps downstream/upstream

C-DATA 4 PON GEPON OLT – FD1204SN WITH 2*10GB UPLINK AND L3 FEATURES

FD1204SN series provides 1 USB interface, 4 uplink combo interface, 2*10Gb uplink interface, and 4/8/16 EPON ports for downstream. It can support 256 ONUs under 1:64 splitter ratio.

Pizza-Box OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high  performance products.

MAIN FEATURES

LTE-A EM06-E (Europe / EMEA / Brazil version) - END OF LIFE - out of production, please use EM060K Global module instead - last few modules available for delivery in 2 weeks lead time

Can work perfectly with our Wodaplug LTE routers !!

Quectel EM12-G is LTE Advanced category 12 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 600Mbps downlink and 150Mbps uplink peak data rates. De-signed in the M.2 form factor, EM12 is compatible with Quectel Cat6 module EM06 and future Cat 16 module EM16, which will facilitate customers to migrate between different categories. SDX20 chipset

Special price now - new, not used modules, original packing !

Key Benefits

●  LTE-A Cat 12 module with M.2 form factor, optimized for eMBB and IoT applications
●  Support DL 3x carrier aggregation and 256QAM
●  Worldwide LTE-A and UMTS/HSPA+ coverage
●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
●  Feature refinements: supports DFOTA and VoLTE
●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

Max. LAN Data Rate: 867Mbps

Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

Wi-Fi Supported Frequency: 2.4G & 5G

Wi-Fi Transmission Standard: 802.11ac

Wired Transfer Rate: 10/100/1000Mbps

2.4G Wi-Fi Transmission Rate: 300 Mbps

Encryption Type: WPA-PSK

Function: FireWall, QoS, VPN

LANPorts:4 WAN Ports:1

Certification: FCC CE

5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs), Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

Since the USB chip out of stock during long period, so the factory produced a batch of WG1608 routers without USB port.

Sierra Wireless 5G Module

* 5G Category: 5G NR Sub-6
* 5G DL 4.5Gbps, UL 660Mbps
* Satellite Systems: Galileo, Glonass, GPS, Beidou (Bands: L1 and L5)
* Firmware: Secure boot, Pre-certified firmware
* Dual SIM single standby (DSSS) switches

The AirPrime® EM9190 M.2 from Sierra Wireless is an Embedded 5G NR and LTE Cat-22 Module that supports Sub-6 GHz and mm-Wave bands. This device is a part of the Sierra EM Series that offers global 5G connectivity. It delivers up to 5.5 Gbps of downlink speed and up to 330 Mbps of uplink speed.

The EM9190 device is available in a 30 x 52 x 2.38 mm footprint. With automatic 4G and 3G fallback networks, and a built-in GNSS receiver, it can be used for a wide range of M2M and IoT applications such as industrial routers, home gateways, industrial and consumer laptops, rugged tablet PCs, video surveillance and digital signage.

CHIPSET - Qualcomm SDX55 , M.2 form factor

Available for orders - leadtime is one - two weeks, em9190 are all like new in perfect working conditoon, has a few scratches on surface, tested & upgrade to latest fw.