Wodaplug EOC Indoor Slave with Gigabit Ethernet port - EOC1121L-S, 700Mbps, 1*GE LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...
Special version - since there is no slave chipset with Gigabit port, we used EOC master chip and modify firmware to work as Slave. This is because of many customers requested Gigabit port for for example repeater application.
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable. You need one master device and you can connect several Slave devices via coax cable network and create smart Ethernet network in yoru building.
EOC1121L series are for NGB next generation broadcast network, especially for Cable TV Operators. It is an advanced end equipment to carry out family bandwidth data access. EOC1121L is based on P1901 International Standard Protocol and HomePlug AV Protocol, with low-band and support big line-loss, long transmission distance.
Based on Qualcomm INT7411 chipset solution of HomePlug AV technology
Work at low frequency between 7.5MHz~65MHz without influence on CATV service
Physical layer speed is 700Mbps and Max MAC layer throughout is 350Mbps
Support data encryption for both uplink and downlink
Support 1*10/100/1000Mbps Ethernet port auto-negotiation function
Support slave(CPE) isolation
Having a questiion ?? Contact us - info at 524wifi.com !!