524WiFi Pulse M6E-IN Pro Plus – Indoor Industrial Wi-Fi 6E Mesh Access Point, Tri-Band 2.5GbE PoE

524WiFi™ professional wireless systems

Indoor Industrial Wi-Fi 6E Mesh Access Point, Tri-Band 2.5GbE PoE

Build an industrial wireless mesh network for large production halls, warehouses and logistics areas. This fixed indoor tri-band Wi-Fi 6E mesh node combines three independent 2×2 radios at 2.4, 5 and 6 GHz, six antennas and six RF outputs with 2.5GbE and Gigabit PoE. Plan inter-node links and coverage across the working area, then connect moving AGVs, AMRs, automated carts and other mobile machines through their onboard roaming clients. Pro Plus configuration and Signal Plus™ antenna-system planning support the complete industrial deployment.

Wi-Fi 6E802.11ax wireless platform

2.4 + 5 + 6 GHzConcurrent radio bands

Wireless meshFlexible site interconnection

1 × 2.5GbE + 1 × Gigabit Ethernet with PoEWired integration and power

Pro Plus — build the complete wireless solution

Pro Plus brings our tuned product configuration, model-specific firmware selection and integration support into one professional wireless solution. For a moving client, the focus is the vehicle connection and transitions along its route; for a fixed access point, the focus is useful coverage and the mesh infrastructure that serves the working area. The hardware, antennas and software are selected as one deployment rather than treated as unrelated parts.

Start with the right radio architecture, plan power and Ethernet, and commission the supplied firmware for the actual network. Our support helps you match the configuration to the application and review the working route or mesh topology.

Signal Plus™ — tuned signal performance for your deployment

Signal Plus™ is the signal optimization part of our tuned 524WiFi™ system. It brings antenna placement, polarization, feed losses, radio roles and channel planning together so the supplied RF hardware can serve the intended route or coverage area effectively. On a moving vehicle, orientation and nearby metalwork change along the route; on a fixed mesh node, antenna direction and link visibility define the useful RF path.

Choose the model-specific antenna layout and validate the complete installation under real traffic. Link coverage and application throughput depend on the site, operating channels, permitted RF power, client capabilities and the final configuration.

Build a flexible indoor mesh network

Use this access point as a fixed node in a professionally planned wireless installation. The three-radio layout lets you assign wireless resources to client service and inter-node communication according to the supplied firmware and the site plan. The 2.5GbE interface provides a fast wired connection for a gateway, switch or local network, while the Gigabit PoE interface supports practical power and network integration.

A complete indoor assembly for professional installations

Six antennas connect the three 2×2 radios: two RF paths per band at 2.4, 5 and 6 GHz. The current indoor assembly is supplied with six antennas.

The indoor enclosure brings the router platform and antenna assembly together for offices, warehouses, production areas and integration projects. Plan clearance around the antenna positions and the heatsink enclosure, place the unit where the intended links have useful RF visibility and provide a properly rated power source.

Your Pulse Industrial Mesh system

The same 524WiFi™ Pulse identity connects the fixed Mesh Nodes with the moving Mesh Clients. Choose the model by its network role, radio architecture and installation environment.

Manufacturer-tested mesh performance: 400 Mb/s across 10 hops

Build industrial mesh links for large working areas. The manufacturer reports sustained 400 Mb/s throughput across a 10-hop mesh chain on the DR5018S mesh platform, describing near-zero throughput attenuation along the tested chain. This result demonstrates the platform’s multi-hop networking potential for production halls, warehouses and logistics sites.

The figure is a manufacturer-reported test result, distinct from theoretical radio PHY rates. Achievable throughput in your installation follows the supplied firmware, radio and channel configuration, antenna system, RF conditions, traffic and topology. Plan the complete network with our Pro Plus and Signal Plus™ deployment support.

Technical specification

Theoretical PHY rates by band

PHY rates describe the radio link signaling capability, rather than measured application throughput. They depend on channel width, spatial streams and client support. A mesh hop also shares airtime with other traffic on its assigned radio; evaluate end-to-end performance across the topology you will actually use.

Radio architecture and theoretical PHY

Three independent 2×2 radios provide six RF paths: two for each radio. The current mesh assembly has six antennas.

How the network fits together

The diagram explains equipment roles and connection paths. It is a planning illustration, not a tested deployment or a scale drawing. Use the wired gateway to connect the wireless mesh to the wider network, then choose radio roles and channels for each node.

Firmware and OpenWrt integration

The IPQ5018 platform has an OpenWrt-based mesh development project. The delivered mesh software and the public development source serve different purposes: use the firmware specified for the supplied hardware and feature set. Record the hardware revision, flash layout, antenna mapping, Ethernet assignment and current firmware version before planning an update.

Ask our technical support for the appropriate configuration instructions or a revision-matched firmware package. Keep an export of the working configuration and a recovery plan before flashing. Feature availability, including management interfaces and any separately licensed firmware tools, must be checked against the ordered software configuration. Product downloads and configuration guidance are supplied through 524WiFi.com™.

Installation and commissioning

1. Define the role. Document whether the device is a fixed mesh node or an onboard roaming unit, the intended traffic, the country of operation and the required radio bands.
2. Plan power and Ethernet. Check the supplied assembly label and power documentation. Use the specified compatible PoE injector/switch or DC supply; active and passive PoE require the correct equipment and wiring.
3. Install the RF system. Connect each band to its intended antenna path, allow mechanical clearance, secure the feeds and check polarization and line of sight for directional links.
4. Configure the network. Set management addresses, network segmentation, credentials, radio channels and the mesh or roaming profile. Keep a record of the final configuration for each node.
5. Validate under real load. Test traffic in both directions, record link rates and packet loss and measure performance where the application operates. For mobile systems, repeat the checks during movement along the complete route.

Antenna placement and regional operation

Six antenna paths serving three 2×2 radios. Indoor enclosure with the supplied antenna assembly; external/internal antenna placement follows the actual delivered configuration.

Use antennas and feeds rated for the operating band and the installation environment. Cable loss, obstructions, reflections and device orientation influence the useful link budget. For a directional link, align both ends and verify the result using link statistics and traffic tests rather than assuming that a clear visual path is sufficient.

Configure 6 GHz only in operating modes permitted for the deployment country and installation. Match the regional radio profile to the indoor installation and the supplied firmware. Country requirements and RF power limits apply to the assembled system, including antenna gain.

Useful diagnostics

FAQ

What is this model designed for?

A fixed indoor mesh access-point installation using a tri-band Wi-Fi 6E platform and a 2.5GbE connection.

What stays fixed, and what moves?

Mesh connects network nodes to build coverage or backhaul paths. Roaming concerns a moving client changing its connection between access points. Plan the fixed infrastructure and the mobile client as complementary parts of the network.

Which radio bands does this model use?

Check the bands in the specification. This model includes a 6 GHz radio alongside 2.4 and 5 GHz, making it a Wi-Fi 6E configuration.

Does the product include a PoE injector?

The standard description covers the router platform, enclosure and specified antenna assembly. Select a compatible power option and include an injector or power supply in the order when it is required for your installation.

Can I use a public OpenWrt image?

Match the image, hardware revision, flash layout and feature set before an update. Contact our support with the model and current firmware version to review the correct path for your assembly.

What should I measure before deployment?

Test application traffic, latency, packet loss and link stability under the expected load and RF conditions. For a mesh, include the real hop count, antenna alignment and simultaneous client load.

Model code and ordering