Antennas

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4x4 MIMO from 617 to 6000 MHz, 2.5 / 3.5 / 4 dBi documented gain, VSWR <2.5.

A wideband four-port outdoor antenna for cellular routers, gateways and modems that use 4x4 MIMO. Its omnidirectional pattern covers the major sub-6 GHz 4G LTE and 5G ranges from 617 to 6000 MHz, while four 3 m leads allow the radio to remain protected indoors or in an enclosure.

• Wide 617-6000 MHz coverage for sub-6 GHz cellular networks
• 4x4 MIMO with four independent antenna feeds
• Omnidirectional 360° horizontal radiation pattern
• Up to 4 dBi gain across the supported frequency groups
• Four SMA male connectors on 3 m white LMR100 cables

Model: 524WIFI-TOF-0660-4DV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 3x3 MIMO with three RF paths, 3 / 4 dBi documented gain, VSWR <2.

A compact three-port ceiling antenna for 3x3 MIMO indoor Wi-Fi coverage. Its omnidirectional pattern distributes service around a central ceiling position across 2.4 GHz and the extended 4.9-7.125 GHz range.

• 3x3 MIMO with three independent antenna feeds
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 3 dBi gain at 2.4 GHz and 4 dBi at 4.9-7.125 GHz
• 360° horizontal coverage for indoor access points
• Three SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TCC-2472-4CV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4x4 MIMO with ±45° polarization, 5 / 7 / 8 / 9 dBi documented gain, Front-to-back ratio ≥18 dB.

A wideband directional panel antenna for 4x4 MIMO cellular routers and gateways. Four cross-polarized elements focus reception and transmission toward the serving site across key 4G LTE and sub-6 GHz 5G bands from 617 to 4200 MHz.

• Wideband 617-4200 MHz coverage across four frequency groups
• 4x4 MIMO with four ±45° cross-polarized elements
• Gain increasing from 5 dBi to 9 dBi across the supported bands
• 80° ±8° horizontal and 65° ±5° vertical beamwidth
• Four fixed N-female ports for low-loss external feeder cables

Model: 524WIFI-TPC-0642-9BX

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4x4 MIMO: 2 vertical + 2 horizontal, 10 / 13 dBi documented gain, Front-to-back ratio ≥25 dB.

A compact high-gain directional panel antenna for 4x4 MIMO Wi-Fi links and focused sector coverage. Four fixed N-female ports feed two vertical and two horizontal elements, helping a compatible radio use spatial diversity across 2.4 GHz and 4.9-7.125 GHz.

• 4x4 MIMO architecture with four fixed N-female ports
• 10 dBi gain at 2.4 GHz and 13 dBi at 4.9-7.125 GHz
• Two vertical and two horizontal polarizations
• Focused 55°/44° horizontal and 50°/40° vertical beamwidth
• At least 25 dB front-to-back ratio and 28 dB port isolation

Model: 524WIFI-TPC-2472-13BD

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 2x2 MIMO: vertical + horizontal, 10 / 13 dBi documented gain, Front-to-back ratio ≥25 dB.

A two-port directional panel antenna for high-gain 2x2 MIMO Wi-Fi links. Its vertical and horizontal elements focus RF energy toward the target area, supporting 2.4 GHz and the extended 4.9-7.125 GHz range in a compact outdoor housing.

• 2x2 MIMO with one vertical and one horizontal element
• 10 dBi gain at 2.4 GHz and 13 dBi at 4.9-7.125 GHz
• Focused 55°/44° horizontal and 50°/40° vertical beamwidth
• At least 25 dB front-to-back ratio and 28 dB port isolation
• Two fixed N-female antenna ports

Model: 524WIFI-TPC-2472-13D

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 2 independent MIMO paths, 4 / 6 dBi documented gain, VSWR <1.5 / <2.2.

A compact outdoor omnidirectional antenna for dual-stream Wi-Fi coverage across 2.4 GHz and the extended 4.9-7.125 GHz range. Two independent feeds support 2x2 MIMO, while the white UV-resistant radome and mast-mount kit suit permanent outdoor installations.

• 2x2 MIMO with two independent antenna ports
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 4 dBi gain at 2.4 GHz and 6 dBi at 4.9-7.125 GHz
• 360° horizontal coverage for access points, gateways and routers
• Two RP-SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TOF-2472-6BV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 6x6 MIMO with six RF paths, 3 / 4 dBi documented gain, VSWR <2.

A low-profile six-port ceiling antenna for dense indoor Wi-Fi installations. It combines 6x6 MIMO capability with 360° horizontal coverage across 2.4 GHz and 4.9-7.125 GHz, keeping the installation discreet in offices, hotels, venues and commercial buildings.

• 6x6 MIMO with six independent antenna feeds
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 3 dBi gain at 2.4 GHz and 4 dBi at 4.9-7.125 GHz
• 360° horizontal coverage from a central ceiling position
• Six SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TCC-2472-4FV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4 independent MIMO paths, 4 / 6 dBi documented gain, VSWR <1.5 / <2.2.

A four-port outdoor omnidirectional antenna designed for 4x4 MIMO Wi-Fi systems. It covers 2.4 GHz and the extended 4.9-7.125 GHz range, providing all-around coverage from one weather-resistant radome and four long integrated leads for flexible equipment placement.

• 4x4 MIMO with four independent antenna ports
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 4 dBi gain at 2.4 GHz and 6 dBi at 4.9-7.125 GHz
• 360° horizontal coverage around the installation point
• Four RP-SMA male connectors on 3 m white LMR100 cables

Model: 524WIFI-TOF-2472-6DV