Antennas

524 WiFI 2.4 / 5.8 GHZ Terminal Antenna, 2dBi, rSMA, 10cm lenght

PRODUCT TECHNICAL SPECIFICATION :

Frequency Range (MHz) - 2400-2483/5100-5880

Input Impendence (Ω) - 50

V.S.W.R ≤ 2

Gain (dBi) 2

Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 2 independent MIMO paths, 4 / 6 dBi documented gain, VSWR <1.5 / <2.2.

A compact outdoor omnidirectional antenna for dual-stream Wi-Fi coverage across 2.4 GHz and the extended 4.9-7.125 GHz range. Two independent feeds support 2x2 MIMO, while the white UV-resistant radome and mast-mount kit suit permanent outdoor installations.

• 2x2 MIMO with two independent antenna ports
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 4 dBi gain at 2.4 GHz and 6 dBi at 4.9-7.125 GHz
• 360° horizontal coverage for access points, gateways and routers
• Two RP-SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TOF-2472-6BV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 6x6 MIMO with six RF paths, 3 / 4 dBi documented gain, VSWR <2.

A low-profile six-port ceiling antenna for dense indoor Wi-Fi installations. It combines 6x6 MIMO capability with 360° horizontal coverage across 2.4 GHz and 4.9-7.125 GHz, keeping the installation discreet in offices, hotels, venues and commercial buildings.

• 6x6 MIMO with six independent antenna feeds
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 3 dBi gain at 2.4 GHz and 4 dBi at 4.9-7.125 GHz
• 360° horizontal coverage from a central ceiling position
• Six SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TCC-2472-4FV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4 independent MIMO paths, 4 / 6 dBi documented gain, VSWR <1.5 / <2.2.

A four-port outdoor omnidirectional antenna designed for 4x4 MIMO Wi-Fi systems. It covers 2.4 GHz and the extended 4.9-7.125 GHz range, providing all-around coverage from one weather-resistant radome and four long integrated leads for flexible equipment placement.

• 4x4 MIMO with four independent antenna ports
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 4 dBi gain at 2.4 GHz and 6 dBi at 4.9-7.125 GHz
• 360° horizontal coverage around the installation point
• Four RP-SMA male connectors on 3 m white LMR100 cables

Model: 524WIFI-TOF-2472-6DV

Pure 5g Whip4 4dBi 4G/5G Rubber Duck Stubby Antenna 600-6000MHz

21,5cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

600-6000MHz

≤2.2 / 4DB / 50Ω / 50W / Length 21,5CM

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4x4 MIMO from 617 to 6000 MHz, 2.5 / 3.5 / 4 dBi documented gain, VSWR <2.5.

A wideband four-port outdoor antenna for cellular routers, gateways and modems that use 4x4 MIMO. Its omnidirectional pattern covers the major sub-6 GHz 4G LTE and 5G ranges from 617 to 6000 MHz, while four 3 m leads allow the radio to remain protected indoors or in an enclosure.

• Wide 617-6000 MHz coverage for sub-6 GHz cellular networks
• 4x4 MIMO with four independent antenna feeds
• Omnidirectional 360° horizontal radiation pattern
• Up to 4 dBi gain across the supported frequency groups
• Four SMA male connectors on 3 m white LMR100 cables

Model: 524WIFI-TOF-0660-4DV

Pure 5g 4dBi 4G/5G  Magnetic Mount Antenna 600-6000MHz with 3m sable, SMA male connector

16cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

617-960/1710-3800/4900-6000 MHz

≤2.2 / 3-4DBi / 50Ω / 50W / Length 16CM

524 LTE Pure 5G / 4G 4dBi OMNI directional Antenna 600-6000MHz with 1m cable, N mamle to SMA male connector

20cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

617-960/1710-3800/4900-6000 MHz

≤2.2 / 3-4DBi / 50Ω / 50W / Length 20CM

IP67-rated dipole, blade-style antenna for WiFi 6/WiFi 6E/WiFi 7 applications in the 2.4 GHz, 5 GHz and 6 GHz bands. The hinged design allows for the antenna to be positioned for optimum performance. The antenna connects via an RP-SMA plug (female socket) connector.

Hinged Blade WiFi 6/6E/7 Antenna similar to The Linx ANT-W63WS6-IPW1

Electrical Specifications
Frequency Range (MHz) 2.4 / 5 / 6G
Bandwidth (MHz) 2000
Input Impendence (Ω) 50
V.S.W.R ≤ 2
Gain (dBi) 7
Max Input Power (w) 5
Mechanical Specifications
Antenna Length (mm) 199*13
Connect Type SMA
Color Black
Cable Type RG178

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 3x3 MIMO with three RF paths, 3 / 4 dBi documented gain, VSWR <2.

A compact three-port ceiling antenna for 3x3 MIMO indoor Wi-Fi coverage. Its omnidirectional pattern distributes service around a central ceiling position across 2.4 GHz and the extended 4.9-7.125 GHz range.

• 3x3 MIMO with three independent antenna feeds
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 3 dBi gain at 2.4 GHz and 4 dBi at 4.9-7.125 GHz
• 360° horizontal coverage for indoor access points
• Three SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TCC-2472-4CV