Antennas by Type
Choose antennas by radiation pattern and installation
After selecting the operating band, choose the physical and RF format that matches the coverage geometry. Type categories make it possible to compare equivalent antenna formats across Wi-Fi and cellular systems.
- Omnidirectional coverage around the antenna.
- Directional panels and arrays for focused links.
- MIMO, embedded and ceiling options for specific radio and installation layouts.
524WiFi™ Signal Plus™
Signal Plus™ is our engineering-led selection standard: the antenna must match the required frequency band, polarization, connector and installation, while the feed path is kept as short and low-loss as practical. A correctly matched passive antenna supports both transmitting and receiving through the same RF path; Signal Plus™ is not an active amplifier and does not claim to create transmitter power.
-
524 WiFi internal 5dBI rSMA ROD Dual Band Terminal Antenna, 2.4 and 5GHz, omni directional, 19.5cm
$9.00524 WiFI 2.4 / 5.8 GHZ Terminal Antenna , rSMA, 19,5cm lenght
PRODUCT TECHNICAL SPECIFICATION :
Frequency Range (MHz) - 2400-2483/5100-5880
Input Impendence (Ω) - 50
V.S.W.R ≤1.7
Gain (dBi) 5
Learn More
-
524WiFi™ Ceiling Wi-Fi 6E Omnidirectional Antenna, 3x3 MIMO, 2.4/5/6 GHz, 3/4 dBi, 3x SMA Male
$45.00524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 3x3 MIMO with three RF paths, 3 / 4 dBi documented gain, VSWR <2.
A compact three-port ceiling antenna for 3x3 MIMO indoor Wi-Fi coverage. Its omnidirectional pattern distributes service around a central ceiling position across 2.4 GHz and the extended 4.9-7.125 GHz range.
- 3x3 MIMO with three independent antenna feeds
- 2400-2500 MHz and 4900-7125 MHz operating bands
- 3 dBi gain at 2.4 GHz and 4 dBi at 4.9-7.125 GHz
- 360° horizontal coverage for indoor access points
- Three SMA male connectors on 30 cm white LMR100 cables
Model: 524WIFI-TCC-2472-4CV
Learn More
-
Wallys 524WiFi 6 DRA5G7 5GHZ single band OMNI antenna 802.11ax , 7dBi, N connector, outdoor
$24.00ElectricalProperties : Frequency Range:2.4~2.5&5.15~5.85GHz Impedance:50Ω VSWR:2.0 Max (≤2.0) Gain(peak):6±0.5dBi Polarization:Linear; Vertical The max antenna feed power is 36dBm Physical Properties : Cable:RG-141 Cable Connector:N-type PLUG Antenna CAP:ABS OperatingTemp:-40℃~+65℃ Storage Temp:-40℃~+75℃ CableTemp:<+250℃ Learn More
-
Quectel YECN028AA ultra wide band 5G/NTN cellular terminal dipole antenna, 410-6000MHz, LTE SMA male, black, 6dBi, IP66
$6.90This Quectel external 5G/NTN antenna covers 5G NR Sub-6GHz frequency bands and is compatible with 4G/3G/2G/LPWA bands and NTN bands. Featuring high efficiency and gain, it is an ideal omni-directional antenna solution to ensure high-speed data transmission, which can be widely used in a diversity of wireless communication devices such as AP, routers, outdoor equipment, real-time monitoring equipment, and many more. The antenna is designed to work with any ground plane size or in free space for ease of integration. Quectel also offers flexible installation with custom cable length and connector options.
Frequency: 410–470MHz, 617–960MHz, 1427–6000MHz
Dimensions: 225mm × 54.5mm × 13mm
Efficiency: up to 82.24% (5G)
RoHS and REACH compliant
Learn More
-
Quectel YE0001BA ultra wide band 5G/4G cellular terminal dipole antenna, 600-6000MHz, LTE SMA male, black, 6dBi
$5.49This ultra-wide-band 5G/4G terminal dipole antenna AZ7795G provides broad coverage from 600-6000MHz whilst backward-compatible to support 3G/2G networks as well at Cat M and NB-IoT. The antenna is designed to work with various GND plane sizes or in free space for ease of integration with a hinged SMA male connector to achieve the optimum position. This omnidirectional antenna is ideally suited for access points, terminals, industrial products and routers, offering great performance with its high gain and efficiency. Quectel provides comprehensive antenna design support such as simulation, testing and manufacturing for custom antenna solutions to meet your specific application needs.
- Frequency band: 600–6000MHz
- Dimensions: 221x26,95x13,5 mm
- VSVR ≤ 3.0
- RoHS compliant
- max Gain 5dBi
- Input Impendence 50 Ω
- AZ7795G OEM
-
Quectel YE0007AA ultra wide band 5G/4G terminal dipole antenna, 600-6000MHz, LTE SMA male, black, 5dBi
$5.50This ultra-wide-band 5G/4G terminal dipole antenna provides broad coverage from 600-6000MHz whilst backward-compatible to support 3G/2G networks as well at Cat M and NB-IoT. The antenna is designed to work with various GND plane sizes or in free space for ease of integration with a hinged SMA male connector to achieve the optimum position. This omnidirectional antenna is ideally suited for access points, terminals, industrial products and routers, offering great performance with its high gain and efficiency. Quectel provides comprehensive antenna design support such as simulation, testing and manufacturing for custom antenna solutions to meet your specific application needs.
- Frequency band: 600–6000MHz
- Dimensions: 152.4mm × 21.79mm × 14.49mm
- Peak efficiency: 75%
- RoHS compliant
- Gain 5dBi
-
524WiFi Hinged Blade WiFi 6/6E/7 Antenna tri band, 7dBi, RSMA male, 2.4 + 5 + 6 GHz triband, tuned, Linx
$7.99IP67-rated dipole, blade-style antenna for WiFi 6/WiFi 6E/WiFi 7 applications in the 2.4 GHz, 5 GHz and 6 GHz bands. The hinged design allows for the antenna to be positioned for optimum performance. The antenna connects via an RP-SMA plug (female socket) connector.
Hinged Blade WiFi 6/6E/7 Antenna similar to The Linx ANT-W63WS6-IPW1
Electrical Specifications
Learn More
Frequency Range (MHz) 2.4 / 5 / 6G
Bandwidth (MHz) 2000
Input Impendence (Ω) 50
V.S.W.R ≤ 2
Gain (dBi) 7
Max Input Power (w) 5
Mechanical Specifications
Antenna Length (mm) 199*13
Connect Type SMA
Color Black
Cable Type RG178
-
524 LTE pure 5G Outdoor OMNI directional antenna with cable for 4G/5G , 600 - 6000 MHz, 4dBi, N female + 1 cable to SMA male
$29.99524 LTE Pure 5G / 4G 4dBi OMNI directional Antenna 600-6000MHz with 1m cable, N mamle to SMA male connector
20cm lenght
5G NR: n41/n77/n78/n79 ( Tested module :MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)
Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32
LTE-TDD: B34/B38/B39/B40/B41/B42/B43
617-960/1710-3800/4900-6000 MHz
≤2.2 / 3-4DBi / 50Ω / 50W / Length 20CM
Learn More
-
524 LTE pure 5G Magnetic Mount 4G/5G Antenna, 617 - 6000 MHz, 4dBi, 3m cable, SMA male connector, 524LTE-TMR-0660-4V-2
$9.99Pure 5g 4dBi 4G/5G Magnetic Mount Antenna 600-6000MHz with 3m sable, SMA male connector
16cm lenght
5G NR: n41/n77/n78/n79 ( Tested module :MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)
Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32
LTE-TDD: B34/B38/B39/B40/B41/B42/B43
617-960/1710-3800/4900-6000 MHz
≤2.2 / 3-4DBi / 50Ω / 50W / Length 16CM
Learn More
-
524WiFi™ 4G LTE/5G External Omnidirectional Antenna, 4x4 MIMO, 617-6000 MHz, 4x SMA Male, 3 m, TOF-0660-4DV
$59.00524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4x4 MIMO from 617 to 6000 MHz, 2.5 / 3.5 / 4 dBi documented gain, VSWR <2.5.
A wideband four-port outdoor antenna for cellular routers, gateways and modems that use 4x4 MIMO. Its omnidirectional pattern covers the major sub-6 GHz 4G LTE and 5G ranges from 617 to 6000 MHz, while four 3 m leads allow the radio to remain protected indoors or in an enclosure.
- Wide 617-6000 MHz coverage for sub-6 GHz cellular networks
- 4x4 MIMO with four independent antenna feeds
- Omnidirectional 360° horizontal radiation pattern
- Up to 4 dBi gain across the supported frequency groups
- Four SMA male connectors on 3 m white LMR100 cables
Model: 524WIFI-TOF-0660-4DV
Learn More
-
524 LTE pure 5G Whip4 Antenna 617-960 / 1710-3800 / 4900 - 6000MHz 4dBi 5G Swivel hinged SMA LTE male Connector
$6.99Pure 5g Whip4 4dBi 4G/5G Rubber Duck Stubby Antenna 600-6000MHz
21,5cm lenght
5G NR: n41/n77/n78/n79 ( Tested module :MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)
Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32
LTE-TDD: B34/B38/B39/B40/B41/B42/B43
600-6000MHz
≤2.2 / 4DB / 50Ω / 50W / Length 21,5CM
Learn More
-
524WiFi™ Outdoor Wi-Fi 6E Omnidirectional Antenna, 4x4 MIMO, 2.4/5/6 GHz, 4/6 dBi, 4x RP-SMA Male, 3 m
$54.90524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4 independent MIMO paths, 4 / 6 dBi documented gain, VSWR <1.5 / <2.2.
A four-port outdoor omnidirectional antenna designed for 4x4 MIMO Wi-Fi systems. It covers 2.4 GHz and the extended 4.9-7.125 GHz range, providing all-around coverage from one weather-resistant radome and four long integrated leads for flexible equipment placement.
- 4x4 MIMO with four independent antenna ports
- 2400-2500 MHz and 4900-7125 MHz operating bands
- 4 dBi gain at 2.4 GHz and 6 dBi at 4.9-7.125 GHz
- 360° horizontal coverage around the installation point
- Four RP-SMA male connectors on 3 m white LMR100 cables
Model: 524WIFI-TOF-2472-6DV
Learn More
-
524WiFi™ Ceiling Wi-Fi 6E Omnidirectional Antenna, 6x6 MIMO, 2.4/5/6 GHz, 3/4 dBi, 6x SMA Male
$49.00524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 6x6 MIMO with six RF paths, 3 / 4 dBi documented gain, VSWR <2.
A low-profile six-port ceiling antenna for dense indoor Wi-Fi installations. It combines 6x6 MIMO capability with 360° horizontal coverage across 2.4 GHz and 4.9-7.125 GHz, keeping the installation discreet in offices, hotels, venues and commercial buildings.
- 6x6 MIMO with six independent antenna feeds
- 2400-2500 MHz and 4900-7125 MHz operating bands
- 3 dBi gain at 2.4 GHz and 4 dBi at 4.9-7.125 GHz
- 360° horizontal coverage from a central ceiling position
- Six SMA male connectors on 30 cm white LMR100 cables
Model: 524WIFI-TCC-2472-4FV
Learn More
-
524WiFi™ Outdoor Wi-Fi 6E Omnidirectional Antenna, 2x2 MIMO, 2.4/5/6 GHz, 4/6 dBi, 2x RP-SMA Male
$49.90524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 2 independent MIMO paths, 4 / 6 dBi documented gain, VSWR <1.5 / <2.2.
A compact outdoor omnidirectional antenna for dual-stream Wi-Fi coverage across 2.4 GHz and the extended 4.9-7.125 GHz range. Two independent feeds support 2x2 MIMO, while the white UV-resistant radome and mast-mount kit suit permanent outdoor installations.
- 2x2 MIMO with two independent antenna ports
- 2400-2500 MHz and 4900-7125 MHz operating bands
- 4 dBi gain at 2.4 GHz and 6 dBi at 4.9-7.125 GHz
- 360° horizontal coverage for access points, gateways and routers
- Two RP-SMA male connectors on 30 cm white LMR100 cables
Model: 524WIFI-TOF-2472-6BV
Learn More
-
524 WiFi ROD omni dual band antenna, 5dBi, RSMA male, 2.4 + 5 GHz (dual band), tuned
$6.99Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector.
Learn More

