Antennas by Type
Choose antennas by radiation pattern and installation
After selecting the operating band, choose the physical and RF format that matches the coverage geometry. Type categories make it possible to compare equivalent antenna formats across Wi-Fi and cellular systems.
- Omnidirectional coverage around the antenna.
- Directional panels and arrays for focused links.
- MIMO, embedded and ceiling options for specific radio and installation layouts.
524WiFi™ Signal Plus™
Signal Plus™ is our engineering-led selection standard: the antenna must match the required frequency band, polarization, connector and installation, while the feed path is kept as short and low-loss as practical. A correctly matched passive antenna supports both transmitting and receiving through the same RF path; Signal Plus™ is not an active amplifier and does not claim to create transmitter power.
-
524 WiFi internal FPC Dual Band 5dBi Antenna , 2.4 / 5 GHz , with cable, ufl IPEX 1 connector
$5.50524 WiFi internal FPC Dual Band 5dBi Antenna , 2.4 / 5 GHz , with 12cm pigtail cable, ufl IPEX 1 connector
Electrical Properties :
Learn More
Frequency 2.4~2.5GHz , 4.9~5.9GHz
Impedance 50 0hm Nominal
V.S.W.R - 1.92 : 1 Max
Return Loss -10 dB Max
Radiation Omni-directional
Gain (Peak) 5,0 dB
Cable Loss 1,5 dB / m Max @ 2450 MHz
Polarization Linear, Vertical
Admitted Power 1 W
Connector ipex1 (ufl)
-
524 WiFi internal ROD Dual Band 2dBi omni directional Antenna 2.4 / 5 GHz, rSMA, 10cm
$4.90524 WiFI 2.4 / 5.8 GHZ Terminal Antenna, 2dBi, rSMA, 10cm lenght
PRODUCT TECHNICAL SPECIFICATION :
Frequency Range (MHz) - 2400-2483/5100-5880
Input Impendence (Ω) - 50
V.S.W.R ≤ 2
Gain (dBi) 2
Learn More
-
524WiFi ROD internal triband 5dBi omnidirectional WiFi Antenna 2,4 - 5,8GHz, rSMA male
$9.90internal triband 5dBi omnidirectional dipol WiFi Antenna 2,4 + 5GHZ, rSMA Learn More
-
Wodaplug Whip3 3dBi Passive GSM LTE 5G 4G PCB FPC Antenna with pigtail i-pex for U.FL-R-SMT-1 modules
$4.99Antenna for LTE application: Fabry-Perot cavity (FPC) antenna
Learn More
Connector Type I-Pex for U.FL-R-SMT-1 connector
Cable Type 1.13
Impedance 50Ω
Polarization Linea
Frequency 700-2700MHZ
VSWR <2.0
Peak gain (dBi) 8dBi
Cable length 12cm
LTE 5G 4G Antenna
-
Wodaplug Whip3 3dBi Passive GSM LTE 5G 4G PCB FPC Antenna with pigtail i-pex4 for MHF4 M.2 LTE modules
$4.00Antenna for LTE application: Fabry-Perot cavity (FPC) antenna
Learn More
Connector Type I-Pex for IPEX MHF 4 connector
Cable Type 1.13
Impedance 50Ω
Polarization Linea
Frequency 700-2700MHZ
VSWR <1.5
Peak gain (dBi) 8dBi
Cable length 12cm
LTE 5G 4G Antenna
-
524 WiFi internal FPC Dual Band 5dBi Antenna , 2.4 / 5 GHz , with 12cm pigtail cable, MMCX connector
$6.90524 WiFi internal FPC Dual Band 5dBi Antenna , 2.4 / 5 GHz , with 12cm pigtail cable, M?CX connector
Electrical Properties :
Learn More
Frequency 2.4~2.5GHz , 4.9~5.9GHz
Impedance 50 0hm Nominal
V.S.W.R - 1.92 : 1 Max
Return Loss -10 dB Max
Radiation Omni-directional
Gain (Peak) 5,0 dB
Cable Loss 1,5 dB / m Max @ 2450 MHz
Polarization Linear, Vertical
Admitted Power 1 W
Connector ipex1 (ufl)
-
Wodaplug Whip5G 5dBi Flexible Embedded Cellular Sub-6 600-6000MHz 5G PCB FPC Antenna with pigtail i-pex4 for MHF4 M.2 LTE modules
$4.00Cellular 4G/5G Wideband Antenna - 5dBi Flexible Embedded Cellular Sub-6 600-6000MHz 5G / 4G PCB FPC Antenna with pigtail Our 4G/5G antennas are made of flexible printed circuit boards (FPC). They feature compact size and high gain. They are ideal built-in antennas for digital products such as mobile phones, PDAs, speakers, dashcams, and tablets.This antenna uses a PIFA antenna design.
Dimmension :86*14mm, The IPEX terminal wire size is ¢ = 1.13mm L = 100mm. Cable lenght is customisable.600 - 6000Mhz, Vertical polarization, 5dBiLearn More

