Search results for '524WiFi'

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 6x6 MIMO with six RF paths, 3 / 4 dBi documented gain, VSWR <2.

A low-profile six-port ceiling antenna for dense indoor Wi-Fi installations. It combines 6x6 MIMO capability with 360° horizontal coverage across 2.4 GHz and 4.9-7.125 GHz, keeping the installation discreet in offices, hotels, venues and commercial buildings.

• 6x6 MIMO with six independent antenna feeds
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 3 dBi gain at 2.4 GHz and 4 dBi at 4.9-7.125 GHz
• 360° horizontal coverage from a central ceiling position
• Six SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TCC-2472-4FV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 2 independent MIMO paths, 4 / 6 dBi documented gain, VSWR <1.5 / <2.2.

A compact outdoor omnidirectional antenna for dual-stream Wi-Fi coverage across 2.4 GHz and the extended 4.9-7.125 GHz range. Two independent feeds support 2x2 MIMO, while the white UV-resistant radome and mast-mount kit suit permanent outdoor installations.

• 2x2 MIMO with two independent antenna ports
• 2400-2500 MHz and 4900-7125 MHz operating bands
• 4 dBi gain at 2.4 GHz and 6 dBi at 4.9-7.125 GHz
• 360° horizontal coverage for access points, gateways and routers
• Two RP-SMA male connectors on 30 cm white LMR100 cables

Model: 524WIFI-TOF-2472-6BV

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 2x2 MIMO: vertical + horizontal, 10 / 13 dBi documented gain, Front-to-back ratio ≥25 dB.

A two-port directional panel antenna for high-gain 2x2 MIMO Wi-Fi links. Its vertical and horizontal elements focus RF energy toward the target area, supporting 2.4 GHz and the extended 4.9-7.125 GHz range in a compact outdoor housing.

• 2x2 MIMO with one vertical and one horizontal element
• 10 dBi gain at 2.4 GHz and 13 dBi at 4.9-7.125 GHz
• Focused 55°/44° horizontal and 50°/40° vertical beamwidth
• At least 25 dB front-to-back ratio and 28 dB port isolation
• Two fixed N-female antenna ports

Model: 524WIFI-TPC-2472-13D

524WiFi Signal Plus™: specified for bidirectional receive and transmit performance with 4x4 MIMO: 2 vertical + 2 horizontal, 10 / 13 dBi documented gain, Front-to-back ratio ≥25 dB.

A compact high-gain directional panel antenna for 4x4 MIMO Wi-Fi links and focused sector coverage. Four fixed N-female ports feed two vertical and two horizontal elements, helping a compatible radio use spatial diversity across 2.4 GHz and 4.9-7.125 GHz.

• 4x4 MIMO architecture with four fixed N-female ports
• 10 dBi gain at 2.4 GHz and 13 dBi at 4.9-7.125 GHz
• Two vertical and two horizontal polarizations
• Focused 55°/44° horizontal and 50°/40° vertical beamwidth
• At least 25 dB front-to-back ratio and 28 dB port isolation

Model: 524WIFI-TPC-2472-13BD

5G WWAN Card To RJ45 Adapter With SIM SloT

Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

AW7915-BMD is a WiFi6 11ax 2T2R 1800Mbps M.2 Module BM Key by MTK MT7915DAN

524WiFi-AW7916-NPD – PROFESSIONAL Wi-Fi 6E 3000 mPCIe MODULE

A professional dual-band dual-concurrent module for Linux access points, routers, embedded systems and high-performance wireless upgrades. It combines 2.4 GHz 2×2 with 5/6 GHz 3×3 operation, two spatial streams, channel widths up to 160 MHz and an aggregate PHY rate up to 3000 Mbps.

Wi-Fi 6 / Wi-Fi 6E · mPCIe · MU-MIMO · MU-OFDMA · WPA3 · CE/FCC certified.

MediaTek MT7916AN / MT7976 · 2.4 GHz + selectable 5/6 GHz DBDC · Linux mt76 / mt7915e · OpenWrt integration guide below.

524 WiFi6 2T2R Dual Bands Dual Concurrent mini PCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 + MT7975 - Dream DR7915 NPD WiFi module, Pro+  - SALE !

DR7915 is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1x2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

DR7915 is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

GT5G-CV M.2 NGFF TO Type-C USB 3.0 dongle - not in stock, please use newer MH2U adapters  

Key Features
Compatibility is strong - Compatible with most M.2 interface 5G modules
Industrial - Industrial grade material design
USB Type-C 3.0 - USB Type-C 3.0 high speed interface

Compatible with most M.2 interface 5G modules
Special shield cover protection design to protect key devices from external force damage, corrosion aging
Nano SIM Card slot
No driver required, plug and play
Led indicators let you know your connection status immediately

USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

• Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
• Introduce integrated aluminum heat sink，make your 5G modem always cool.
• Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
• 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
• Adjust output to 3.7V. Prevent voltage drop when high data transfer .
• Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
• Use Nano SIM card slot , support hot swap simcard.
• ESD prtection at USB and SIM slot.
• Better performance, because of fast thermal module

5G NR frequency range - 600 - 6000MHz

Gain - 40dbi

VSWR - 1.5

Polarization - vertical

input impendance - 50Ω

Max power 50W

Beam width - omni directional

connector - SMA Male

color - black

antenna total size - H:20, W:4.5, T:1 cm operation temperature - -40°C to 80°C Radome material - ABS 

WiFi 5 wave2 4T4R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7615NP1, DBDC 

Chipset: MTK MT7615N , this is older WIFI 5 module,lead time is 2-3 weeks.

Interface: Normal Gold Finger miniPCIE

AW7615-NP1 is a 11ac WiFi Mini PCIe standard full-size Module based on Mediatek MT7615 which supports 1.7 Gbps PHY rate and Dual Bands Dual Concurrents (DBDC).

It fully complies with IEEE802.11ac and IEEE802.11 a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7615 is designed to support standard based features in the areas of security,quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7615 supports concurrent dual-band operation at 5GHz and 2.4GHz band (DBDC, Dual-Band-Dual-Concurrent).

With the advent of 802.11ac, multi-user MIMO (MU-MIMO) is defined. MT7615 supports MU-MIMO with different configurations. An AP is able to use its antenna arrays to transmit multiple frames to different clients at the same time and over the same frequency spectrum.

524 WiFi internal FPC Dual Band 5dBi Antenna , 2.4 / 5 GHz , with 12cm pigtail cable, M?CX connector

Electrical Properties :
Frequency 2.4~2.5GHz , 4.9~5.9GHz
Impedance 50 0hm Nominal
V.S.W.R  - 1.92 : 1 Max
Return Loss -10 dB Max
Radiation Omni-directional
Gain (Peak)  5,0 dB
Cable Loss  1,5 dB / m Max @ 2450 MHz
Polarization Linear, Vertical
Admitted Power 1 W
Connector ipex1 (ufl)