EOC Coax Internet

EOL - discontinued product, now we ofer older used tested working units replaced by PON network :

Used older device removed from a working network after switching to PON optics. Tested, working, 3 month warranty.

Wodaplug EOC Indoor Slave - EOC1121R4, 700Mbps, 4*LAN, 2*F, WEB Management, max 128 slaves, VLAN, IGMP, QoS ...AR7410based solution
Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Learn More

C-DATA EOC Indoor Slave with 4 FE ports - CD5204, 500Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

Used older device removed from a working network after switching to PON optics. Tested, working, 3 month warranty.

Description

CD5204 EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Learn More

Wodaplug Internet over Coax EOC Indoor Master-EOC1121L, 700Mbps, 2*LAN, 2*F, WEB Management, max 256 slaves, VLAN, IGMP, QoS ...

Used older device removed from a working network after switching to PON optics. Tested, working, 3 month warranty.

Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

NETWORK APPLICATION :

• CATV
• Internet Access
• VOD
• IPTV
• Camera monitor system

PRODUCT FEATURES:

• HomePlug AV or IEEE1901 standard
• AR7410 chipset
• Works on low frequency band, no influence on CATV Service
• High throughout，MACLayer throughput up to320-350Mbps
• Support bi-direction data encryption
• Support broadcast storm limitation
• Support data packet statistics
• Support auto-update and auto-configuration
• Support WEB、CLI、SNMP based network management
• Support On-line upgrading
• Aluminum alloy die casting shaping, good heat dissipation

Learn More

INDOOR DIPLEX FILTER DD 8711f

to split DATA and SAT+TV signal on the beginning of coax network and to divide SAT+TV and DATA signal before end TV (very low loss -1dB and very high signal separation)
or to realise BY PASS of an existing aplifier in your coax network.
This solution is designed for TV / DVB-T2 cabling network with SATELITE signal coexistence
high quality housing with 3* F connectors
high isolation
low price

Learn More

All In One EOC Master with XPON ONU and Optical receiver - EOC1121ALL-O 60V, 700Mbps, 2x EOC module, 1x XPON ONU, 1x HFC CATV Optical receiver, WEB Management, max 256 slaves, VLAN, IGMP, QoS ...

Description :

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

The All-In-One master is designed to provide Internet service to subscriber’s home through the existing coaxial access network. With XPON, EOC and HFC technology , the All-In-One product meets the CATV broadcasting, VOD and Internet service requirement of cable operators for FTTB/FTTC. It build with XPON ONU, EOC master and Optical Receiver module in one housing. The Optical Receiver module received the optical signal from the Optical Transmitter of HFC network, and the signal processed by the PD, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 104dBuv( 4*RF output). Ethernet data is delivered to ONU through the XPON network form the OLT. The EOC Master module meets Home-plug AV standards, is designed based on Qualcomm AR7410 chip-set with high anti-jamming capability OFDM technology. It will modulate the Ethernet data into EOC RF signal in the 7.5-65MHz .The EOC signal and CATV signal (87~860MHz) can run on one coaxial cable without interference. The EOC Master can provide high speed data service at 700Mbps PHY Layer speed, the MAC Layer throughput is up to 320Mpbs. Learn More

All In One EOC Master with XPON ONU and Optical receiver - EOC1121ALL-O 220V, 700Mbps, 2x EOC module, 1x XPON ONU, 1x HFC CATV Optical receiver, WEB Management, max 256 slaves, VLAN, IGMP, QoS ...

Description :

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

The All-In-One master is designed to provide Internet service to subscriber’s home through the existing coaxial access network. With XPON, EOC and HFC technology , the All-In-One product meets the CATV broadcasting, VOD and Internet service requirement of cable operators for FTTB/FTTC. It build with XPON ONU, EOC master and Optical Receiver module in one housing. The Optical Receiver module received the optical signal from the Optical Transmitter of HFC network, and the signal processed by the PD, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 104dBuv( 4*RF output). Ethernet data is delivered to ONU through the XPON network form the OLT. The EOC Master module meets Home-plug AV standards, is designed based on Qualcomm AR7410 chip-set with high anti-jamming capability OFDM technology. It will modulate the Ethernet data into EOC RF signal in the 7.5-65MHz .The EOC signal and CATV signal (87~860MHz) can run on one coaxial cable without interference. The EOC Master can provide high speed data service at 700Mbps PHY Layer speed, the MAC Layer throughput is up to 320Mpbs. Learn More

Wodaplug EOC Indoor Master / Slave module with Gigabit Ethernet port -  PHY rate 700Mbps, 1*GE LAN, 1* SMA F coax connector,
Special version - RL7410T - for 1GE slave, we have designed a small module, it is with one GE port, it can config to master or slave mode using AVITAR or MSTAr utility.  But it is not include duplexer, one SMA to F cable included. See below photo.

It just EOC chip , no switch chip, so it cannot config vlan / tag - Generally eoc slave with wifi  or 4 port EOC slave , both have EOC chip+ switch chip integrated cpu, swtich chip can config the vlan tag, but the 1GE port module is without switch chip. so you can connect a separate router after EOC slave

Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable. You need one master device and you can connect several Slave devices via coax cable network and create smart Ethernet network in yoru building.

Learn More

1000M EOC end unit / slave (AV2), indoor, 2*F connector, 4*LAN 10/100Mb, Dual band WiFi 

This new Wodaplug MSTAR 510CE chip Homeplug AV2 Ritcherlink based  EOC Slave can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with Wodaplug 1121L and Wodaplug 1000 AV2 EOC Master. 

1000M EOC Slave is the terminal device in this system, it offers 4 FE ports, dual band WiFi, build L2 Ethernet transmission channel in the cable network, to transmit internet signal, but not affect the original CATV signal at the same time.

It has the advantages of long transmission distance, good network adaptability and high bandwidth.

Wodaplug MSS5004WAC is an EOC Slave based on Ritcherlink MStar MSE510CE solution. It’s has 4 10/100M full duplex Ethernet ports which can simultaneously connect computer, Set Top Box(STB) or other terminals. When working with Richerlink EoC master series, it can reach the maximum physical rate of 1000Mbps and build Layer-2 Ethernet transmit network through television coaxial cable and meanwhile have no influence on the pre-existing  CATV signal transmission. 

Wodaplug MSS5004WAC occupies low frequency band under 65MHz and has no collision with the current CATV system frequency which can decrease mutual interference. Wodaplug MSS5004WAC support 4 SSID which can for cable operator use or end users use. It’s based on 802.11n standard, compatible with 802.11 b/g/n/ac, providing up to 1200M wireless transmission for home network coverage.Wodaplug MSS5004WAC support Bandwidth control and encrypted transmission to satisfy high reliable service. The maximum uplink bandwidth can be configured individually in order to prevent the attack to the whole coaxial transmission network.

Wodaplug MSS5004WAC has two accounts with different authority: Administrator Account and User Account.

Learn More

Wodaplug 1000  MSM8011HG is a new MSTAR  MSE 1000 chip Homeplug AV2 based  EOC master + xPON HGU ONU integrated. You can use GPON or EPON as the Ethernet / Internet source. If you do not use any PON OLT, then you can use the FE 100Mb RJ45 port.

It can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with other Wodaplug or Wodaplug 1000 EOC slaves.

Features: 

Support +500M real bandwidth when work in 7.5M-86Mhz/AV2  with Wodaplug 1000 EOC slaves

Support up to 50 connect end user slave modems in real environemt

Older slave EOC 1121L and simillar units that use 7.5-65 MHZ / AV1 range can also work with this master unit.

Learn More

A compact optical core for a connected building. WodaPlug™ RH8001GR, manufactured by Richerlink, brings one GPON OLT port, an SFP uplink and four Gigabit Ethernet ports together for managed fibre-to-room installations.

• Connect compatible GPON endpoints, including the xPON input of WodaPlug™ MSM8011HG EOC masters.
• Plan fibre distribution with a manufacturer-specified split ratio up to 1:128, matched to the optical budget.
• Configure locally through the Web UI; supported AVASA workflows bring project and device management together.

Model RH8001GR: Mini GPON OLT / FTTR controller. Select uplink optics and fibre patching for the exact network and connector version.

Learn More

Wodaplug EOC Indoor Slave - EOC1121R4L, 600Mbps, 4*LAN, 2*F, WEB Management, max 256 slaves, VLAN, IGMP, QoS ...

Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

 

 

Learn More

Wodaplug EOC Outdoor Master-EOC1121L, 230V AC, 700Mbps, 1*LAN, 2*F, WEB Management, max 256 slaves, VLAN, IGMP, QoS ...

EOL - last one unit in stock available

Description

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Learn More

1000M EOC Salve (AV2), indoor, 2*F connector, 4*LAN 10/100Mb

This new MSTAR 510CE chip Homeplug AV2 based  EOC Slave can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with Wodaplug 1000 AV2 EOC Master. 

1000M EOC Slave is the terminal device in this system, it offers 4 FE ports, build L2 Ethernet transmission channel in the cable network, to transmit internet signal, but not affect the original CATV signal at the same time.

It has the advantages of long transmission distance, good network adaptability and high bandwidth.

Learn More