Currency:
11ac complete AP/CPE/Routers

5G NR 4G Dual SIM dual-Q modules ROUTER LTE-A MTK7621 4xLAN 1xWAN 12x antena 1xM.2 USB3 3xMiniPCIe H721 V5G 11ac WiFi metal case

5G NR 4G Dual SIM dual-Q modules ROUTER LTE-A MTK7621 4xLAN 1xWAN 12x antena 1xM.2 USB3 3xMiniPCIe H721 V5G 11ac WiFi metal case

Be the first to review this product

$99.00

In stock

SKU: wodaplug5GNR-H721

Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware)  - this version is EOL, please use version 7 now !


The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..


Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !


The H721 v5G now includes:



  • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed

  • 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 

  • 12 Volt 2Amp Power Adapter

  • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem

  • Wall mounts, screws and lags

  • Cat5e Ethernet Cable

  • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q

  • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.

  • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.

  • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great


Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)



4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem


2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 


4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A


Software :


we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)


Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware


New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888


Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/


You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 


Description

Details

The H721 v5G Dual SIM Dual-Q 5G LTE router with ROOTer (version 6 of HW board or higher) and 4 standalone modules slots - has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 QCA 9984 QCA 9886 and latest wifi 6 MT7915 / MT7916 miniPCIe modules.

 

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

 

The H721 v5G now includes:

  • 4 x 5G LTE Antennas + MHH4 pigtails for LTE modules pre-installed
  • 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
  • 12 Volt 2Amp Power Adapter
  • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
  • Wall mounts, screws and lags
  • Cat5e Ethernet Cable
  • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WiFi module, please order them separately based on your needs. For WiFi you can also use WLE200NX or 802.11ac 600/900vx PRO plus modules, for GSM/LTE you can use Quectel or Sierra modules or SIMCom including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q, RM520N or SIMCom
  • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
  • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
  • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware:

4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for LTE, 1xM.2(USB3.0) fot 5GNR and LTE

MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880), board version 6

1x M.2 (NGFF key B) slot USB3.0 support  5 Gbit/s  bandwidth (5GNR for 5G network and UTMC GMS 3G 4G LTE etc.)

1x MiniPCIE (UTMC GMS 3G 4G LTE ) slot USB2.0 support 480Mbit/s

1x Minipcie slot for primary WIFI (support 3.3V and 5V wifi card)

1x Minipcie slot for secondary WIFI (only support 3.3V wifi card), this slot can be shared as Usb2.0 modem slot.

4 x lan+1 x wan 10/100M/1000M RJ45 port 

1 x TF card slot

14 x led for display more information.
12 x antenna hole for future use total

H721 v5G support DC 12-24V 

 + SIM slot ESD protection. Independence Power regulator  for LTE and WIFI slot ,Industrial voltage regulator wide range input 5V ~ 27V, Solid capacitor be adopted. Metal case for heat conduction.

 

Detachable Wireless (Wi-Fi) Overview - 802.11ac/n QCA9880 600/900 VX module recommended. New X-WRT also supports WiFi 6 MT7915 / 7916 modules.

H721 Router provider 2 x Mini PCIE interface  for wifi, The current Router firmware has preloaded 9K and 10K wifi driver, support all Qualcomm AR and QCA series Mini PCIE wifi card (do not support any wifi card mixed with bluetooth)

we have tested following wifi card already : AR9280 AR9287 AR9382, QCA9880 QCA9882, MT7915, MT7916

 

  Software:  

We use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman Has made firmware for this board.
support most ROOTer function, support most LTE modem drivers(sierra wireless,Quectel,Huawei,ZTE,Meig)

We have tested:  Quectel RM500Q RM502Q RM510Q RM520N EC25E EC25A EC20 EM06 EM12

sierra wireless EM(MC)7355 EM(MC)7455 EM7430 EM7565 EM7511 , MeiG SLM750 (TA) , ZTE ME3760 ME3860 

Add 9K and 10K drivers for all QCA and AR wifi card router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

Source code and firmware download address: http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files  

https://drive.google.com/drive/folders/1oy_x5cKbh3XZjzW1jiKHvEqq9lFHmrxQ  

You can download rooter firmware, dairyman still update the firmware, it support RM520N now! We test 05-24-AB22 full, 

NEW X-WRT firmware available !!!  https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

================X-WRT RELEASE NOTES===========================
Attention - X-wrt default IP address is http://192.168.15.1/ username admin password admin.

Default X-WRT information: SSID:X-WRT_XXXX. SSID Password:88888888.

We made a video about H721 new firmare webui, https://www.youtube.com/watch?v=ZLI1FhQUHBc

firmware download link: https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

1 - New firmware has support AW7916 / AW7915 wifi 6 modules. Do not support QCN wifi 6.

2 - It supports RM520N-GL. X-WRT soft engineer use RM520N . You need manual create new interface (QMAP cellular) and manual choose AT port to display modem signal information

3 - New fw has introduce new Quectel QMAP , it will reduce cpu load.

4 - Full support hw-nat,
5 - Support dual-lte or 5G modem load-balance (see instruction.)

The modem signal luci is still in development.

Special FEATURES:

Connection Monitoring
Connection Failover ( for 2 SIM cards at one time)
Load Balancing (for 2 SIM cards bonding at a time)
Network Status
SMS Messaging
The Miscellaneous Page
Features to Help Debug Modem Problems

 

For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

  Specifications

Main Chipset

MTK7621 / Dual-core / 880MHz , board HW version 6

RAM

DDR3 256MB (Expandable to 512MB)

FLASH

SPI Flash 16MB (Max 32MB)

Wi-Fi Protocol

IEEE802.11ac, IEEE802.11a, IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u

Wi-Fi Rate

5GHz: 1300Mbps Max, depend on your wifi card  2.4Ghz: 450 Mbps depend on your wifi card

Antennas

5 x 5dBi (Wi-Fi) detachable

Interfaces

1 x 10/100M/1000M WAN Port, Auto MDI/MDIX4 x 10/100M/1000M LAN Port

1x M.2 (NGFF key B) slot USB3.0 support 5GNR/LTE

1x miniPCIE (NGFF Key B) slot USB2.0 support LTE

2 x mini PCIe slot for wifi

1x mini PCIe slot for Modem(Shared with 1 wifi slot)

1 x SD card slot

2x SIM card slot (esd protection)

LED

LTE A,SigA,LTE B,Sig B, TF, WIFI A,WIFI B

PWR, SYS, WAN , LAN 1/2/3/4

Button

1 x RESET

Power

DC 12V 2.0A adapter, H721 v5G support DC 12-24V 

Power Consumption

< 12W (without wifi   card)

Dimensions(L*W*H)

Router: 180MM (7.08ft) x 105MM (4.13ft) x 23MM (0.90ft)PCB:

Management

IP: 192.168.1.1User Name: admin

Password: admin

Uses

  LTE Router

WAN Type

3G/4G/LTE/5GNR,PPPoE, Dynamic IP, Static IP,

DHCP

Server,  Client, DHCP Client List, Address Reservation

Port Forwarding

Server, Client, DHCP Client List, Address Reservation

Operating System

 OpenWRT,   LEDE/ROOter 

Firewall Security

Client filterMAC Address Filter

URL Filter

Long-distance WEB management

DNNS

Supported

Bandwidth Control

Supported

Static Router

Supported

System Logging

Supported

Web UI Themes

Supported

Other Functions

Breed preload

Multi-Wan Load Balancing (2 x SIM card bonfing supported)

SMS Messaging 

Work Environment

Operating Temperature: 0℃ ~ 40℃ recommedned because of 5G module performance

Storage Temperature: -40℃~ 70℃

Operating Humidity: 10%~90% non-condensing

Storage Humidity: 10%~90% non-condensing

Certifications

 CE, FCC, RoHS

Included Accessories

3 x 5dBi 5Ghz SMA detachable Wi-Fi antennas

2 x 5dBi 2.4GHz  SMA detachable Wi-Fi antennas

5 x ipx to sma pigtail for wifi

2 x 4dBi detachable LTE Omini antenna

2 x ipx4 to sma-RP pigtail for LTE

1 x Power Adapter 12V DC

6 x Screws/Spacers for mini PCI-e modem card installation

Router case colors may vary from photos

Dimensions(L*W*H)

Router: 197mm (7.75ft) x107mm (4.2ft) x 34mm (1.34ft

 

Packaging: 240mm (9.4ft) x 195mm (7.6”) x 70mm (2.7)

Weight

Router: 0.8 KG (1.76 LBS)Packaged: 1.4 KG (3.07 LBS)

You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

Additional

Additional Information

Brand Wodaplug.com
firmware http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

Tags

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews

  1. Be the first to review this product

WRITE YOUR REVIEW

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Having a questiion ?? Contact us - info at 524wifi.com !!