524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6BV

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 2×RP-SMA male connector with 3m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13D

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization,
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 205×180×45mm
• 2×N Female connector
• IP55 rain and dust resistant

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721O 5G NR outdoor version now includes:

• outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

Hardware: 

MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

1x M.2 b.key USB 3.0 as 5Gnr interface,

1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

Lightning protection design

 Heat sink at botoon of 5Gnr modem

NEW X-WRT firmware available !!!

Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

Max. LAN Data Rate: 867Mbps

Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

Wi-Fi Supported Frequency: 2.4G & 5G

Wi-Fi Transmission Standard: 802.11ac

Wired Transfer Rate: 10/100/1000Mbps

2.4G Wi-Fi Transmission Rate: 300 Mbps

Encryption Type: WPA-PSK

Function: FireWall, QoS, VPN

LANPorts:4 WAN Ports:1

USB 3.0 port: 1 included

Certification: FCC CE

5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs),  Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1USB+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.

The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G version 7 now includes:

• 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) . 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
• Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

Description

DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

Onmi Antenna 

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Planar Antenna 

■  2 x 2 MIMO 5G Antenna

■  5G: 16dbi

Available for orders, lead time is 2-3 weeks.

Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !

Description

• DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).

  Learn More