Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721O 5G NR outdoor version now includes:

• outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

Hardware: 

MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

1x M.2 b.key USB 3.0 as 5Gnr interface,

1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

Lightning protection design

 Heat sink at botoon of 5Gnr modem

NEW X-WRT firmware available !!!

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6BV

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 2×RP-SMA male connector with 3m cable

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13D

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization,
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 205×180×45mm
• 2×N Female connector
• IP55 rain and dust resistant

Z2101AX-D Gigabit Ports WIFI 6 Mesh ROUTER

WiFi 6 home router, which can access the Internet through WAN port, and then share the Internet through wireless WiFi 6 and 1000Mbps wired LAN.

Relevant standards and specifications:

• USB3.0/USB2.0 Bus Standard

• IEEE802.11n/g/b/a/ac/ax

• IEEE802.3/802.3u/802.ab

 Main features of the product

1).Support IEEE 802.11ax/ac/n/11b/g standard.

2).1*WAN+3*LAN 10/100/1000Mbps ports.

3).1* USB 3.0 data interface.

4).High speed 1800Mbps,dualband and gigabit ports.

5).Support MESH automatic networking.

Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

Max. LAN Data Rate: 867Mbps

Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

Wi-Fi Supported Frequency: 2.4G & 5G

Wi-Fi Transmission Standard: 802.11ac

Wired Transfer Rate: 10/100/1000Mbps

2.4G Wi-Fi Transmission Rate: 300 Mbps

Encryption Type: WPA-PSK

Function: FireWall, QoS, VPN

LANPorts:4 WAN Ports:1

USB 3.0 port: 1 included

Certification: FCC CE

5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs),  Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1USB+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

WE1026 is a dual band 3G/4G Wi-Fi router (3G / 4G gateway) specially for Vehicles using. LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06. It has1 LAN port, support 802.11 a/b/g/n/ac and 3G/4G. This device has Wide Area Network VPN tunnel, Local Area Network Wi-Fi security authentication, 4G/3G and watchdog functions etc, to achieve wireless LAN seamless connection, automatic network redial to provide users with high-speed, secure, reliable mobile broadband services.It has a USB 2.0 data interface, a MICRO SD (TF) card interface, with larger storage function.

This device with metal case and vehicle anti-interference design, to achieve excellent anti-interference performance. Also it uses vehicle power supply design, support 9V~28V Car power supply,can effectively prevent equipment damage from vehicle’s power fluctuations, it offers a wonderful solution for vehicle Wi-Fi such as bus Wi-Fi,car Wi-Fi, train Wi-Fi, taxi Wi-Fi etc. This device also widely used in Wi-Fi coverage project like Bus station, the Airport, Sea port etc. At the same time, it is also widely used in scenic where Wi-Fi coverage and other public places where Wi-Fi coverage of the Internet.

• Special for Vehicles using;
• Complies with 802.11b/g/n/a/ac. wireless protocol;
• Support dual band 2.4G and 5G wifi signal + support 3G/4G at the same time;
• LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06.
• Support 4G / 3G watchdog function, automatic network redial.
• Can be dialed through an external USB interface (need to mount USB 3G/4G Dongle )
• Support GPS function (depending on 3G/4G module)
• Support to automotive power 12V and 24V systems, the minimum operating voltage is 9V, the maximum operating voltage is 36V. The maximum can be withstand 174V duration 150ms surge voltage, meet to 5a, 5b standard of the car protection.

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!