• Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
• 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
• 256MB NAND Flash
• 32MB NOR Flash
• M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
• 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
• 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
• 1x 2.5Gbps Ethernet port
• 5x 1Gbps Ethernet ports
• 1x USB 2.0 Port

APPLICATIONS

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

• 802.11ax MU-MIMO OFDMA Access Point    • Mesh router supporting EasyMesh      • Smart AP TWT   • Can support OpenWIFI firmware  

This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc