Currency:

MU-MIMO ac Wave2 solution

802.11 ac Wave2 miniPCIe modules and router boards. New MU-MINO WiFi5 solution !!

Position
Set Descending Direction

Grid List

20 per page

Items 21 to 28 of 28 total

Page:
  1. 1
  2. 2
  1. DR6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6. Wallys

    $119.00

    DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports

    Samples are available now! OpenWiFi and OpenWRT firmware supported.

     11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

    Features

     Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

    Support: QCN9074 WiFi 6E Card in M.2 slot

    Product Description

    DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

    Learn More
  2. DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6

    $149.99

    DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

    Samples are available now! OpenWRT firmware and OpenWiFi supported

     11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

    Features

     Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

    Support: QCN9074 WiFi 6E Card in M.2 slot

    Product Description

    DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

    Learn More

    Out of stock

  3. DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi

    $89.00

    IPQ 4019 / 4029  Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board

    • Featuring with industrial-grade IPQ4019/IPQ4029 chipset 
    • Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module 
    • Support 4.940GHz to 5.825GHz Frequency Range
    • Support 2.400GHz to 2.482GHz 
    • Support 2 x 5G MMCX Connectors and 2x2.4G MMCX 
    • Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth 
    • Support 11ABGN/AC 
    • RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
    • FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
    • Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
    • USB 3.0 support ! miniPCIe LTE-A module supprted !
    • Support Openwifi  Support QSDK  Support Openwr

    • Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!

    Learn More
  4. Qualcomm Atheros QCA 9377 dual-band WiFi AC Bluetooth wireless network card

    $17.00

    Advanced 802.11ac combo SoC - this module is EOL - you can use Intel AC7265 module as substitue 

    Advanced 802.11ac features such as MU-MIMO, Host wake-on-wireless and ARP (Address Resolution Protocol) offloading enable the WLAN link to remain associated for extended periods for additional power savings

    Supports dual-mode Bluetooth 5  - QCA9377 supports Bluetooth for Class-1 and Class-2 transmissions without requiring an external power amplifier Advanced WLAN/Bluetooth coexistence and concurrent RX WLAN/Bluetooth coexistence allows for superior rateover-range throughput and low-latency performance in real-world operating conditions Power saving techniques for low power consumption

    Both WLAN and Bluetooth power management utilize advanced power saving techniques such as: - gating clocks to idle or inactive blocks - voltage scaling - fast start and settling circuits - active duty cycles - processor frequency scaling

    Learn More

    Out of stock

  5. WiFi 5 5N17 5GHZ 17dBi DUAL-POLARIZATION ANTENNA for 11ac wifi, 2*2 MIMO, COMPEX

    $15.00

    Special Price $12.00

    COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl

    • 5.1 ~ 5.9 GHz
    • 17 dBi Dual-Polarization
    • 2x U.FL
    • -40dB Isolation
    • Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)
    Learn More
  6. Wallys QCA DR 6018 v4 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, CP01

    $115.00

    Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA

    Samples are available, higher quantity manufactured upon request with quick lead time. OpenWiFi and OpenWRT supported !

     CP01 - c4 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

    • Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
    • 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
    • 256MB NAND Flash
    • 32MB NOR Flash
    • M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
    • 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
    • 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
    • 1x 2.5Gbps Ethernet port
    • 5x 1Gbps Ethernet ports
    • 1x USB 2.0 Port

    APPLICATIONS

    QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

    • 802.11ax MU-MIMO OFDMA Access Point    • Mesh router supporting EasyMesh      • Smart AP TWT   • Can support OpenWIFI firmware  

    This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc

    Learn More
  7. Turris WiFi 2.4 / 5GHz Antenna Diplexer with LTE Coexistence Filter (Dual Band)

    $24.99

    Turris Diplexer with LTE Coexistence Filter

    It combines the 2.4GHz/5GHz signals to one single dual-band antenna with or without an LTE coexistence filter. Instead of using 8x Antennas for both WiFi radio, you may now reduce the antenna to 4 by using our diplexer to connect both 2.4GHz and 5GHz radios together. LTE coexistence option is with High Rejection in LTE bands.

    Specifications:
    • 1x1 2.4GHz/5GHz U.FL Connector
    • 1x1 2.4GHz/5GHz SMA Connector, no cable sincluded in
    • 2412MHz~2472MHz, 4900MHz~5950MHz
    • 50 Ω for Impedance
    Learn More
  8. Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV versions boards)

    $19.90

    Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)

    Features:

    Support 802.3AT/AT 

    The output voltage is 24V

    The efficiency is 85% 

    Support surge protection 

    Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals

     

    Product Description : PD-25 is a 802.3at module,that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.

     

    Learn More
Position
Set Descending Direction

Grid List

20 per page

Items 21 to 28 of 28 total

Page:
  1. 1
  2. 2