WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot

Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now

775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac

• Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
• 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
• 128MB System Memory
• 16MB NOR Flash
• 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
• Supports Dynamic Frequency Selection (DFS)
• Single SIM Holder on-board
• Support 2 x Gigabit Ethernet Port

Applications : 

• 802.11g/n + 802.11a/n/ac Access Point

• Point-to-MultiPoint High Capacity Wireless Bridge

• Wireless Customer-Premises Equipment (CPE)

WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.

Power solution :

DC Jack: 12-24V

PoE: IEEE 802.3af 48V,

IEEE 802.3at 56V,

or Passive PoE 36-56V DC

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!