COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl

• 5.1 ~ 5.9 GHz
• 17 dBi Dual-Polarization
• 2x U.FL
• -40dB Isolation
• Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)

Advanced 802.11ac combo SoC - this module is EOL - you can use Intel AC7265 module as substitue 

Advanced 802.11ac features such as MU-MIMO, Host wake-on-wireless and ARP (Address Resolution Protocol) offloading enable the WLAN link to remain associated for extended periods for additional power savings

Supports dual-mode Bluetooth 5  - QCA9377 supports Bluetooth for Class-1 and Class-2 transmissions without requiring an external power amplifier Advanced WLAN/Bluetooth coexistence and concurrent RX WLAN/Bluetooth coexistence allows for superior rateover-range throughput and low-latency performance in real-world operating conditions Power saving techniques for low power consumption

Both WLAN and Bluetooth power management utilize advanced power saving techniques such as: - gating clocks to idle or inactive blocks - voltage scaling - fast start and settling circuits - active duty cycles - processor frequency scaling

Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)

Features:

Support 802.3AT/AT 

The output voltage is 24V

The efficiency is 85% 

Support surge protection 

Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals

Product Description : PD-25 is a 802.3at module，that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.

DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module

Works only with DR518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6102  5GHz, max 23dBm per chain, up to 2402Mbps  Single Band 5 GHz 2x2 WiFi 6E 802.11ax  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Turris Diplexer with LTE Coexistence Filter

Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module

Works only with IPQ Dream 518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6122  6GHz, max 23dBm per chain, up to 2402Mbps  Single Band 6GHz 2x2 WiFi 6E (802.11ax)  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13D

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization,
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 205×180×45mm
• 2×N Female connector
• IP55 rain and dust resistant

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6BV

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 2×RP-SMA male connector with 3m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

Z2101AX-D Gigabit Ports WIFI 6 Mesh ROUTER

WiFi 6 home router, which can access the Internet through WAN port, and then share the Internet through wireless WiFi 6 and 1000Mbps wired LAN.

Relevant standards and specifications:

• USB3.0/USB2.0 Bus Standard

• IEEE802.11n/g/b/a/ac/ax

• IEEE802.3/802.3u/802.ab

 Main features of the product

1).Support IEEE 802.11ax/ac/n/11b/g standard.

2).1*WAN+3*LAN 10/100/1000Mbps ports.

3).1* USB 3.0 data interface.

4).High speed 1800Mbps,dualband and gigabit ports.

5).Support MESH automatic networking.

DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Features:

Dual-core ARM 64bit A53@1.0GHz Processor

512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

Support BT5.1

M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

POE 802.3 bt，at，af support

Support Openwifi

Product Description

DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Dual-core ARM 64bit A53@1.0GHz Processor

1G DDRL3L System Memory

8MB NOR Flash, 256MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

M.2 Card Slot for QCN9074 WIFI 6E Card

M.2 Card Slot for QCN6122-6E Card

M.2 Card Slot for QCN6102-5GCard

Support Openwifi

DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card.