MU-MIMO ac Wave2 solution
802.11 ac Wave2 miniPCIe modules and router boards. New MU-MINO WiFi5 solution !!
-
Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
$149.00Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
Planar Antenna
■ 2 x 2 MIMO 5G Antenna
■ 5G: 16dbi
Available for orders, lead time is 2-3 weeks.
Learn More -
Wallys DR-AP4029 Indoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 + 5GHZ omni 4 / 6dBi antennas
$125.00MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi
Description
DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
Onmi Antenna
■ 2 x 2.4G&5G Antenna
■ PCB Antenna
■ 2.4G: 4dbi ;5G: 6dbi
Enclosure
■ Dimension: 220x 220 x 42.54mm
■ UV Protected and Durable ABS Radome
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
-
Turris WiFi 2.4 / 5GHz Antenna Diplexer with LTE Coexistence Filter (Dual Band)
$24.99Turris Diplexer with LTE Coexistence Filter
It combines the 2.4GHz/5GHz signals to one single dual-band antenna with or without an LTE coexistence filter. Instead of using 8x Antennas for both WiFi radio, you may now reduce the antenna to 4 by using our diplexer to connect both 2.4GHz and 5GHz radios together. LTE coexistence option is with High Rejection in LTE bands.Learn More
Specifications:- 1x1 2.4GHz/5GHz U.FL Connector
- 1x1 2.4GHz/5GHz SMA Connector, no cable sincluded in
- 2412MHz~2472MHz, 4900MHz~5950MHz
- 50 Ω for Impedance
-
SALE - WPJ428 Multi-function IPQ4028 Embedded Board, 710MHz CPU / 2x GE Port / Dual Band 802.11ac Wave 2, LTE Gateway
$99.90WPJ428HV - 2.4GHz & 5GHz 2×2 802.11ac Wave 2 MU-MIMO Wireless Embedded Board with M.2 Slot
- Next Gen IPQ4028 ARM v7 CPU, 710MHz CPU
- On-board Dual Band 2×2 802.11ac Wave 2 300Mbps @ 802.11n + 867Mbps @ 802.11ac
- 802.11ac Wave 2
- Integrated IEEE 802.3af/at
- Support 2 x Gigabit Ethernet Port
- 1x NGFF (M.2) Slot
- 802.11ac Wave 2 LTE Gateway - WPJ428 board only provide M2 slot for 3G/4G module, LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
- samples available ! for compatible LTE modules check our LTE modules category !
- Can support Quectel EM12-G 4G LTE module now !!! Same as EC25, EP06 or EM7455 modules
-
Qualcomm Atheros QCA 9377 dual-band WiFi AC Bluetooth wireless network card
$17.00Advanced 802.11ac combo SoC - this module is EOL - you can use Intel AC7265 module as substitue
Advanced 802.11ac features such as MU-MIMO, Host wake-on-wireless and ARP (Address Resolution Protocol) offloading enable the WLAN link to remain associated for extended periods for additional power savings
Supports dual-mode Bluetooth 5 - QCA9377 supports Bluetooth for Class-1 and Class-2 transmissions without requiring an external power amplifier Advanced WLAN/Bluetooth coexistence and concurrent RX WLAN/Bluetooth coexistence allows for superior rateover-range throughput and low-latency performance in real-world operating conditions Power saving techniques for low power consumption
Both WLAN and Bluetooth power management utilize advanced power saving techniques such as: - gating clocks to idle or inactive blocks - voltage scaling - fast start and settling circuits - active duty cycles - processor frequency scaling
Learn More