Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

  

Planar Antenna 

■  2 x 2 MIMO 5G Antenna

■  5G: 16dbi

Available for orders, lead time is 2-3 weeks.

Learn More

MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

Description

DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

Onmi Antenna 

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

  

Learn More

WLE650V5-18 - Single Band 2×2 802.11ac Wave 2 Module - available now !

"The selling point would be that our WLE650V5-18 is a Wave 2 2x2 module. In the whole world, no manufacturer is able to solve the heat issue faced by our Wave 2 products. And Compex is the only one that is able to do so now!"

The WLE650V5-18 Wireless module is powered by the latest QCA9888 802.11ac Wawe2 chipset that suppot 160MHz channels and MU-MIMO capabilities and is now supported by ATH10K linux drivers!!! Theoretical trough put up to 1733Mbps!

Learn More

WPJ428HV - 2.4GHz & 5GHz 2×2 802.11ac Wave 2 MU-MIMO Wireless Embedded Board with M.2 Slot

Learn More

COMPEX WLE1216V5-20 MU-MIMO 4 X 4 802.11ac miniPCIe Wawe2 Radio module, QCA 9984 chip, 5GHz, single band, 20dBm

Model: WLE1216V5-20 - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0 Standard form factor
Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead

The WLE1216V5-20 is a IEEE 802.11ac wireless adapter that operates in 5GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset( "Cascade" series), the WLE1216V5-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11ac technology, WLE1216V5-23 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise aplications.The WLE1216V5-20 is backward compatible with 802.11a/n and fully supports industry standards compliant security.

Max connected clients for wle1216V5-20 in wpq864 is about 500users. (class B, C Network) !!!
Wave 2 Board Data :
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)
Learn More

WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot

Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now

775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac

• Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
• 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
• 128MB System Memory
• 16MB NOR Flash
• 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
• Supports Dynamic Frequency Selection (DFS)
• Single SIM Holder on-board
• Support 2 x Gigabit Ethernet Port

Applications : 

• 802.11g/n + 802.11a/n/ac Access Point

• Point-to-MultiPoint High Capacity Wireless Bridge

• Wireless Customer-Premises Equipment (CPE)

WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.

Power solution :

DC Jack: 12-24V

PoE: IEEE 802.3af 48V,

IEEE 802.3at 56V,

or Passive PoE 36-56V DC

Learn More

COMPEX WLE1216V2-20 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe WiFi MODULE - MOQ 20pcs, lead time 2-3 weeks

Model: WLE1216V2-20-CUS239-4A-TE - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0

Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead.

The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.

Product Highlights

• Qualcomm Atheros ‘Cascade’ QCA9984
• 2.4GHz max 20dBm output power (per chain)
• Heat sink allows free air operation
• IEEE 802.11b/g/n compliant, up to 800Mbps
• Multi-user MIMO (MU-MIMO) beamformer
• Mini PCI Express 2.0 interface
• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
• Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
• Supports Dynamic Frequency Selection (DFS)
• Designed for High Bandwidth Enterprise Wireless Access Points

https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)

Learn More

Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !

Description

• DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).

  Learn More

Dual Band 2×2 MU-MIMO 802.11ac/a/b/g/n Versatile Indoor Access Point

 

Learn More

COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl

• 5.1 ~ 5.9 GHz
• 17 dBi Dual-Polarization
• 2x U.FL
• -40dB Isolation
• Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)

Learn More

WLE1216VX - DUAL BAND 4×4 MU-MIMO 802.11AC WAVE 2 MODULE

Model: WLE1216VX - 7A - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0 Standard form factor
you can order now !! lead time is 2-3 weeks !!

The WLE1216VX is a IEEE 802.11ac wireless adapter that operates in 2,4GHz and 5GHz bands /dual band/, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset( "Cascade" series), the WLE1216VX dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11ac technology, WLE1216VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216VX is backward compatible with 802.11a/n and fully supports industry standards compliant security.

Max connected clients for wle1216VX in wpq864 is about 500users. (class B, C Network) !!!
Wave 2 Board Data :
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can wotk with Ath10driver well :-)

• Qualcomm Atheros QCA9984 “Cascade” Series
• 2.4GHz max 20dBm output power (per chain)
• 5GHz max 19dBm output power (per chain)
• Heat sink allows free air operation
• 2.4GHz 4×4 MU-MIMO Technology, up to 800Mbps
• 5GHz 4×4 MU-MIMO Technology, up to 1733Mbps
• Multi-user MIMO (MU-MIMO) beamformer
• Mini PCI Express 2.0 interface
• Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w, and z standards
• Supports Dynamic Frequency Selection (DFS)
• Designed for High Bandwidth Enterprise Wireless Access Points

Learn More

Learn More

Turris Diplexer with LTE Coexistence Filter

Learn More

WLE1216V5-20 i-Tempo 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe QCA 9994 WiFi MODULE - Industrial grad eversion , MOQ 20pcs, lead time 2 weeks

Model: WLE1216V2-20-CUS239-4A-TE - QCA 9994 chip - 4* ufl - MiniPCIe pin v2.0

The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9994 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.

Product Highlights

• Qualcomm Atheros ‘Cascade’ QCA9994
• 2.4GHz max 20dBm output power (per chain)
• Heat sink allows free air operation
• IEEE 802.11b/g/n compliant, up to 800Mbps
• Multi-user MIMO (MU-MIMO) beamformer
• Mini PCI Express 2.0 interface
• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
• Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
• Supports Dynamic Frequency Selection (DFS)
• Designed for High Bandwidth Enterprise Wireless Access Points

https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can wotk with Ath10driver well :-)

Learn More