Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Learn More

Dual Band 2×2 MU-MIMO 802.11ac/a/b/g/n Versatile Indoor Access Point

 

Learn More

Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7CA 85C, COMPEX Networks

Available now in stock!

The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----85 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

• • Qualcomm-Atheros QCA9890, XB140 Reference Design
• • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• • Operating temperature range:-40 C to 85 C
• • 3X3 MIMO Technology & up to 1.3Gbps
• • MiniPCI Express 1.1 interface

Learn More

Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7BA , COMPEX Networks

Available now in stock!

The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----75 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

• • Qualcomm-Atheros QCA9890, XB140 Reference Design
• • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• • Operating temperature range:-40 C to 75 C
• • 3X3 MIMO Technology & up to 1.3Gbps
• • MiniPCI Express 1.1 interface

LINUX users : customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.

We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE900VX module

Learn More

WLE1216V5-20 i-Tempo 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe QCA 9994 WiFi MODULE - Industrial grad eversion , MOQ 20pcs, lead time 2 weeks

Model: WLE1216V2-20-CUS239-4A-TE - QCA 9994 chip - 4* ufl - MiniPCIe pin v2.0

The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9994 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.

Product Highlights

• Qualcomm Atheros ‘Cascade’ QCA9994
• 2.4GHz max 20dBm output power (per chain)
• Heat sink allows free air operation
• IEEE 802.11b/g/n compliant, up to 800Mbps
• Multi-user MIMO (MU-MIMO) beamformer
• Mini PCI Express 2.0 interface
• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
• Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
• Supports Dynamic Frequency Selection (DFS)
• Designed for High Bandwidth Enterprise Wireless Access Points

https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can wotk with Ath10driver well :-)

Learn More

WLE600V5-27ESD - 5GHz High Power 2×2 MIMO 802.11ac Wave 1 QCA9882 Module - lead time is 2-3weeks now - available for orders

Learn More

WLE600VX-7BA   Industrial Grade Dual Band 2×2 802.11ac Industrial Grade Module, up to 70C

Very limited availability now and new production not confirmed now! - you can use 524WiFi 600VX Pro+ modules instead

Qualcomm Atheros QCA9892 - Industrial Grade Chipset

• 2.4GHz max 21dBm & 5GHz max 18dBm output power (per chain)

• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n

• 2x2 MIMO Technology, up to 867Mbps

• Mini PCI Express edge connector

• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

• Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards • Supports Dynamic Frequency Selection (DFS)

• Cards are individually calibrated for Quality Assurance

• Supports 4.9GHz operation

 

Certification :
CE (!) 0678, FCC, IC Canada (7849A‐WLE600VX) , TELEC certified (Japan -reg.no.JU000537H - R 206-00537)

Learn More

Compex 802.11be Wi-Fi 7 modules

Learn More

Compex 802.11be Wi-Fi 7 modules

Learn More

Compex 802.11be Wi-Fi 7 modules

Learn More

Compex 802.11be Wi-Fi 7 modules

Learn More

AVAILABLE !!! COMPEX power over ethernet , POE -100 220, injektor and extraktor, 3,3V up to 100m, fce: remote power/local power. The Compex Power Over Ethernet (POE-100-3.3) Kit is an accessory for the Compex Wireless Access Point, WPE54G. POE-100-3.3 allows the supply of operational power to a WPE54G via category 5 UTP cables. By deploying the POE-100-3.3, it removes the restriction of needing the Access Point to be close to a power supply. This means the Access Point can be used virtually anywhere. The POE-100-3.3 Kit consists of an injector unit and extractor unit and is an essential kit for outdoor or indoor wireless network deployment. Power Input 12V DC, 1.5A Power Output: 5V Ethernet Connector: RJ-45 Ethernet Data Rate: 10/100 Mbps Learn More

indoor plastic BOX for WP54/WP543 router board + walmount kit + screws. not for wpj344 Learn More

CompexWPJ531LV-A Dual Radio Embedded Board gen3 - available again, but MOQ is 50pcs - lead time is 2-3 weeks now

part no: WPJ531LV 7A07P01612AR-1 (no SIM slot)
WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available.

Learn More