Search results for 'COMPEX'
-
WLE600VX - i 7C Industrial-grade (85°C) 802.11ac Dual band Radio miniPCIe QCA9892 module
$66.00WLE600VX - 7C Industrial Grade (85°C) Dual Band 2×2 802.11ac miniPCIe Module
Availability confirmed for end Sept 2022 now! Pre-orders are required.
Qualcomm Atheros QCA9892 - Industrial Grade Chipset
• 2.4GHz max 21dBm & 5GHz max 18dBm output power (per chain)
• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• 2x2 MIMO Technology, up to 867Mbps
• Mini PCI Express edge connector
• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
• Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards • Supports Dynamic Frequency Selection (DFS)
• Cards are individually calibrated for Quality Assurance
• Supports 4.9GHz operation
Certification :
Learn More
CE (!) 0678, FCC, IC Canada (7849A‐WLE600VX) , TELEC certified (Japan -reg.no.JU000537H - R 206-00537) -
WiFi 6 Mediatek MT7915 2T2R Dual Band Concurrent DBDC miniPCIe module IEEE 802.11ax 2.4G / 5GHz AW7915-NPD 524wifi.com
$55.00WiFi6 2T2R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NPD
AW7915-NPD is a WiFi6 11ax 2T2R 1800Mbps mini PCIe Module by MT7915DAN - new improved version available ! WPA3 supported in latest OpenWRT.AW7915-NPD is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1x2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.
AW7915-NPD is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.
MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.
Learn More -
WIFI 6 Mediatek MT7915 4T4R Dual Band Selectable miniPCIe module IEEE 802.11ax 2.4G / 5GHz AW7915-NP1 524wifi.com
$56.00WiFi6 4T4R Dual Bands Selectable mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NP1
New samples available now - final version ready!
AW7915-NP1 is a 4T4R 2401 Mbps WiFi6 11ax Mini PCIe Module by MT7915 AN chip, Dual Bands selectable is configurable. Can not be Dual Band dual conncurrent, for DBDC application please use NPD version.
AW7915-NP1 is a WiFi6 Mini PCIe Module 4T4R based on Mediatek MT7915AN which is a WiFi Mini PCIe single chip which supports 2401 Mbps PHY rate with PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915AN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.
MT7915AN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915AN.
Learn More -
WiFi 5 5N17 5GHZ 17dBi DUAL-POLARIZATION ANTENNA for 11ac wifi, 2*2 MIMO, COMPEX
$15.00
Special Price $12.00
COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl
- 5.1 ~ 5.9 GHz
- 17 dBi Dual-Polarization
- 2x U.FL
- -40dB Isolation
- Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)
-
wave 2 Mediatek MT7615-NP1 4T4R Dual Bands Dual Concurrent miniPCIe module IEEE 802.11ac 2.4G / 5GHz 524wifi.com
$39.90WiFi 5 wave2 4T4R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7615NP1, DBDC
Chipset: MTK MT7615N
- Interface: Normal Gold Finger miniPCIE
AW7615-NP1 is a 11ac WiFi Mini PCIe standard full-size Module based on Mediatek MT7615 which supports 1.7 Gbps PHY rate and Dual Bands Dual Concurrents (DBDC).
It fully complies with IEEE802.11ac and IEEE802.11 a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7615 is designed to support standard based features in the areas of security,quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.
MT7615 supports concurrent dual-band operation at 5GHz and 2.4GHz band (DBDC, Dual-Band-Dual-Concurrent).
With the advent of 802.11ac, multi-user MIMO (MU-MIMO) is defined. MT7615 supports MU-MIMO with different configurations. An AP is able to use its antenna arrays to transmit multiple frames to different clients at the same time and over the same frequency spectrum.
-
Wallys QCA DR6018C v1 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, SFP port
$115.00Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA
Samples are available, higher quantity manufactured upon request with quick lead time.
DR6018C v1 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
- Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
- 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
- 256MB NAND Flash
- 32MB NOR Flash
- M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
- 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
- 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
- 1x 2.5Gbps Ethernet port
- 1x 1Gbps Ethernet port with POE , 3x 1Gbps Ethernet
- 1x USB 2.0 Port , 1x SFP port
- Support: QUECTEL RM500/502Q and QCN9074 WiFi 6E cards
APPLICATIONS
• 802.11ax MU-MIMO OFDMA Access Point • Mesh router supporting EasyMesh , Hotel Wireless applications • Smart AP TWT
Product Description
DR6018C V01 based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
-
Wallys QCA DR 6018 v4 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, CP01
$115.00Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA
Samples are available, higher quantity manufactured upon request with quick lead time. OpenWiFi and OpenWRT supported !
CP01 - c4 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
- Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
- 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
- 256MB NAND Flash
- 32MB NOR Flash
- M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
- 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
- 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
- 1x 2.5Gbps Ethernet port
- 5x 1Gbps Ethernet ports
- 1x USB 2.0 Port
APPLICATIONS
QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!
• 802.11ax MU-MIMO OFDMA Access Point • Mesh router supporting EasyMesh • Smart AP TWT • Can support OpenWIFI firmware
This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc
-
Wallys DRA25 2,4GHz and 5GHZ dual band OMNI antenna, 6dBi, N connector, outdoor
$24.00ElectricalProperties :
Frequency Range:2.4~2.5&5.15~5.85GHz
Impedance:50Ω
VSWR:2.0 Max (≤2.0)
Gain(peak):6±0.5dBi
Polarization:Linear; Vertical
The max antenna feed power is 36dBm
Physical Properties :
Cable:RG-141 Cable
Connector:N-type PLUG
Antenna CAP:ABS
OperatingTemp:-40℃~+65℃
Storage Temp:-40℃~+75℃
CableTemp:<+250℃
-
Wallys DR3G11 Linux PC PCIe adapter for M.2 WiFi modules, 1x M.2 slot to PC PCIe adapter
$30.00Features
Support 1 pcs M.2 card
Support Intel AX200NGW
Support DR9074 - 5G / 6E WIFI 6 modules
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description
DR3G11 is an adapter card with one M.2 slot. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest m.2 interface cards. Each comes with both low and regular profile brackets. Brackets include holes for mounting SMA connectors, or for using as cable exit holes.
Learn More -
Wallys DR-AP6018-S Outdoor WiFi 6 AP, 802.11ax 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
$169.00Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !
Description
-
DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).
Learn More
-
-
Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
$149.00Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
Planar Antenna
■ 2 x 2 MIMO 5G Antenna
■ 5G: 16dbi
Available for orders, lead time is 2-3 weeks.
Learn More -
Wallys DR-AP4029 Indoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 + 5GHZ omni 4 / 6dBi antennas
$125.00MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi
Description
DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
Onmi Antenna
■ 2 x 2.4G&5G Antenna
■ PCB Antenna
■ 2.4G: 4dbi ;5G: 6dbi
Enclosure
■ Dimension: 220x 220 x 42.54mm
■ UV Protected and Durable ABS Radome
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
-
Wallys 2G41 Linux PCIe adapter for miniPCIe and M.2 WiFi modules, 4*miniPCIE slot to PCIe adapter
$79.90Features
Support 4pcs Mini PCIE cards or 4 pcs M.2 cards , can support DR9074 QCN 9074 / 9072 modules
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description
4G41 is an adapter card with four MiniPCIe and four M.2 slots. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest miniPCIe and m.2 interface cards. Comes with regular profile bracket.
Bracket include holes for mounting SMA connectors, or for using as cable exist holes.
Available for orders
Learn More -
USB HUB DAUGHTER BOARD for WPJ344 / 558 , 2*USB 2.0 + USB miniPCIe, compex
$19.90
Special Price $13.00
USB extension board for WPJ 344 and WPJ 558 boards
- 2 x USB 2.0 ports
Learn More
- 1 x miniPCIe-based USB 2.0 only interface
(e.g. 3G modems, not additional radio card) -
Turris WiFi 2.4 / 5GHz Antenna Diplexer with LTE Coexistence Filter (Dual Band)
$24.99Turris Diplexer with LTE Coexistence Filter
It combines the 2.4GHz/5GHz signals to one single dual-band antenna with or without an LTE coexistence filter. Instead of using 8x Antennas for both WiFi radio, you may now reduce the antenna to 4 by using our diplexer to connect both 2.4GHz and 5GHz radios together. LTE coexistence option is with High Rejection in LTE bands.Learn More
Specifications:- 1x1 2.4GHz/5GHz U.FL Connector
- 1x1 2.4GHz/5GHz SMA Connector, no cable sincluded in
- 2412MHz~2472MHz, 4900MHz~5950MHz
- 50 Ω for Impedance