Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7CA 85C, COMPEX Networks

Available now in stock!

The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----85 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

• • Qualcomm-Atheros QCA9890, XB140 Reference Design
• • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• • Operating temperature range:-40 C to 85 C
• • 3X3 MIMO Technology & up to 1.3Gbps
• • MiniPCI Express 1.1 interface

Key benefits

• Qualcomm Atheros QCN6024/9024 Pine series chipset

• 2,4GHz, 4x4 MU-MIMO OFDMA up to 1376Mbps PHY rate

• 5GHz, 4x4 MU-MIMO OFDMA up to 4804Mbps PHY rate

• Dual band selectable Wifi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

- lead time is longer, not available now - part np WLE3000HX 7A0924S

DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Features:

Dual-core ARM 64bit A53@1.0GHz Processor

512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

Support BT5.1

M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

POE 802.3 bt，at，af support

Support Openwifi

Product Description

DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

LTE-A EM060K-GL - Cat 6 module with an M.2 form factor measuring 42.0mm × 30.0mm × 2.3mm

Features

• LTE Cat 6 module
• 42.0mm × 30.0mm × 2.3mm
• Max. data rates of 300Mbps downlink / 50Mbps uplink
• M.2 package, key-B
• Extended temperature range of -40°C to +85°C
• LTE-A Cat 6 module with M.2 form factor
• Support DL 2 Carrier Aggregation and 64QAM
• Worldwide LTE-A and UMTS/HSPA+ coverage
• Built-in eSIM (optional), DSSA
• Low power mode
• Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
• MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
• Powered by the Snapdragon® X12 LTE Modem from Qualcomm Technologies Inc

Quectel EM12 4G IoT/M2M-optimized LTE-A Cat12 Module EM120K-GL 4G IOT Module Compatible EM06 EM16

EM120K-GL 4G LTE Cat12 Module Specifications:

* Product type: 4G Cellular Module
* Category: LTE Cat12 , LTE-A
* Chipset: Qualcomm
* Form factor: M.2, key-B
* Dimensions: 42.0 × 30.0 × 2.3mm
* Frequency Bands:
- LTE-FDD Bands: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B292/B30/B321/B66/B71
- LTE-TDD Bands: B34/B38/B39/B40/B41/B42/B43/B463(LAA)/B48 (CBRS)
- Up to 3 × CA: Intra-band and Inter-band
- WCDMA: B1/B2/B3/B4/B5/B6/B8/B19

Control via AT Commands: 3GPP TS27.007 and Quectel Enhanced AT Commands

* Target Market: Global

Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz

Model: 524LTE-TOF-0660-4DV-1

Electrical Specifications
Frequency-MHz 617-960/1710-3800/4900-6000
Gain-dBi 2.5 / 3.5 / 4
VSWR <2.5
Polarization Vertical
Horizontal Beam Width 360°
Vertical Beam Width 60°
Impedance 50 ohms
Max. Input Power 50W
Lightning Protection DC Ground

Mechanical Specifications
Connector 4×SMA male
Cable 1 meter RG405
Dimension Ø132*220 mm
Weight 1.2 kg
Mounting Mast Ø30-Ø50 mm
Radome Material UV PVC
Rate Wind Velocity 210km/h
Operating Temperature -40°C - +65°C

Pure 5g Whip4 4dBi 4G/5G Rubber Duck Stubby Antenna 600-6000MHz

21,5cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

600-6000MHz

≤2.2 / 4DB / 50Ω / 50W / Length 21,5CM

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable