Description
Details
DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports
Samples are available now!
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor
1GB DDRL3L System Memory
8MB NOR Flash, 256MB NAND Flash
Supports Dynamic Frequency Selection (DFS)
2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate
2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
(can not support LTE 5G modules)
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.
Compact “DR6018-S” router board that runs Linux on a Qualcomm IPQ6010 with 802.11ax (Wi-Fi 6) and an M.2 slot plus dual GbE ports, including one with active or passive PoE, and optional micro-SD, GPS, and USB 3.0.
This board has followed up on its 5-port DR6018 v3 router board with a smaller DR-6018-S board with the same Qualcomm-Atheros IPQ6010 SoC with 802.11a/n/ac/ax (Wi-Fi 6), but with only 2x GbE ports. The 125 x 105 x 20mm DR-6018-S features 802.3bt-compliant, active and passive, 24-48V Power-over-Ethernet on one of the ports. By comparison, the DR6018 v3 offers a single passive PoE port along with 3x standard GbE and a 2.5GbE port.
The up to 1.8GHz, quad-core, Cortex-A53 IPQ6010, which has also appeared on 8devices’ Mango module and DVK, features built-in support for dual-band MU-MIMO, 2.4GHz/5GHz 802.11ax. Wi-Fi 6 is faster than 802.11ac (Wi-Fi 5) and supports concurrency for simultaneous WiFi connections to multiple devices. Wally’s does not list the OS, but has previously informed us its Qualcomm boards run Linux.
Although not listed in the specs, the detail view suggests you can optionally choose to remove the 2.4GHz radio and use only the 5GHz connection. In addition to the built-in 802.11ax, there is an M.2 E-key slot for adding a Qualcomm QCN9074 802.11ax module. Four x U.FL antenna connectors are included along with a Bluetooth 4.2 radio and optional GPS.
The DR6018-S ships with 256MB to 1GB DDR3L RAM via dual sockets plus 8MB NOR and 256MB NAND flash. A micro-SD and USB 3.0 port are optional. An FFC/FPC connector provides an LCD display output and there is a 12-pin serial interface.
In addition to the PoE port, a DC jack operates at the same 24-48V range. The board has a -40 to 70°C operating range with 5-95% non-condensing humidity resistance. The DR6018-S supports an EasyMeshHotel Wireless application.
Applications
802.11ax MU-MIMO OFDMA Access Point MeshroutersupportingEasyMeshHotel Wireless application Smart AP TWT
Absolute Maximum Rating |
Parameter |
Rating |
Unit |
Supply Voltage |
24V~48V(DC Jack) |
V |
Operating Temperature Range |
-40 to +70 |
ºC |
Storage Temperature Range |
-45 to +105 |
ºC |
Operating Humidity Range |
5 to +95 (non-condensing) |
% |
Hardware Specifications |
Symbol |
Parameter |
CPU |
Qualcomm-Atheros IPQ6010 |
CPU Frequency |
Quad-core ARM 64 bit A53 @1.8 GHz processor |
System Memory |
1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design |
Ethernet Port |
1 x 1Gbps Ethernet Ports & POE 1x 1Gbps Ethernet Ports |
NGFF Slot |
M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0(For WiFi Module) |
SD Card Slot |
1x SD Card Slot(Option) |
USB /header |
1x USB 3.0 Port(Option) |
POE |
LV Version : 24V~48V passive POE / HV version : Active POE(Suport 802.3bt) |
DC Jack |
24V~48V power supply |
LED header |
FFC/FPC Connector |
Serial Port |
1x Serial Port 12 Pin Connector |
Wireless |
On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain 4 x MMCX Connectors |
Bluetooth | CSR8811 BLE 4.2 |
Nor Flash |
8MB |
Nand Flash |
256MB |
DDR |
256MB~512MB |
Dimension |
125mm x 105mm x 20mm |
Radio TX Specifications(5180MHz-5825MHz) |
Operating Mode |
Data Rate |
Power |
Tolerance |
|
1 Chain |
2 Chains |
|||
5Ghz 802.11ax HE20 |
MCS0 |
20dBm |
23dbm |
±2dB |
MCS1 |
20dBm |
23dBm |
±2dB |
|
MCS2 |
20dBm |
23dBm |
±2dB |
|
MCS3 |
20dBm |
23dBm |
±2dB |
|
MCS4 |
19dBm |
22dBm |
±2dB |
|
MCS5 |
18dBm |
21dBm |
±2dB |
|
MCS6 |
17dBm |
20dBm |
±2dB |
|
MCS7 |
16dBm |
19dBm |
±2dB |
|
MCS8 |
15dBm |
18dBm |
±2dB |
|
MCS9 |
14dBm |
17dBm |
±2dB |
|
MCS10 |
13dBm |
16dBm |
±2dB |
|
MCS11 |
13dBm |
16dbm |
±2dB |
|
5Ghz 802.11ax HE400 |
MCS0 |
20dBm |
23dbm |
±2dB |
MCS1 |
20dBm |
23dBm |
±2dB |
|
MCS2 |
20dBm |
23dBm |
±2dB |
|
MCS3 |
20dBm |
23dBm |
±2dB |
|
MCS4 |
19dBm |
22dBm |
±2dB |
|
MCS5 |
18dBm |
21dBm |
±2dB |
|
MCS6 |
17dBm |
20dBm |
±2dB |
|
MCS7 |
16dBm |
19dBm |
±2dB |
|
MCS8 |
15dBm |
18dBm |
±2dB |
|
MCS9 |
14dBm |
17dBm |
±2dB |
|
MCS10 |
13dBm |
16dBm |
±2dB |
|
MCS11 |
13dBm |
16dbm |
±2dB |
|
5Ghz 802.11ax HE80 |
MCS0 |
20dBm |
23dbm |
±2dB |
MCS1 |
20dBm |
23dBm |
±2dB |
|
MCS2 |
20dBm |
23dBm |
±2dB |
|
MCS3 |
20dBm |
23dBm |
±2dB |
|
MCS4 |
19dBm |
22dBm |
±2dB |
|
MCS5 |
18dBm |
21dBm |
±2dB |
|
MCS6 |
17dBm |
20dBm |
±2dB |
|
MCS7 |
16dBm |
19dBm |
±2dB |
|
MCS8 |
15dBm |
18dBm |
±2dB |
|
MCS9 |
14dBm |
17dBm |
±2dB |
|
MCS10 |
13dBm |
16dBm |
±2dB |
|
MCS11 |
13dBm |
16dbm |
±2dB |
Radio TX Specifications(2412MHz-2482MHz) |
Operating Mode |
Data Rate |
Power |
Tolerance |
|
1 Chain |
2 Chains |
|||
2.4Ghz 802.11ax HE20 |
MCS0 |
23dbm |
26dbm |
±2dB |
MCS1 |
23dBm |
26dBm |
±2dB |
|
MCS2 |
23dBm |
26dBm |
±2dB |
|
MCS3 |
23dBm |
26dBm |
±2dB |
|
MCS4 |
23dBm |
26dBm |
±2dB |
|
MCS5 |
23dBm |
26dBm |
±2dB |
|
MCS6 |
23dBm |
26dBm |
±2dB |
|
MCS7 |
22dBm |
25dBm |
±2dB |
|
MCS8 |
21dBm |
24dBm |
±2dB |
|
MCS9 |
21dBm |
24dBm |
±2dB |
|
MCS10 |
18dBm |
21dBm |
±2dB |
|
MCS11 |
17dbm |
20dbm |
±2dB |
|
2.4Ghz 802.11ax HE40 |
MCS0 |
23dbm |
26dbm |
±2dB |
MCS1 |
23dBm |
26dBm |
±2dB |
|
MCS2 |
23dBm |
26dBm |
±2dB |
|
MCS3 |
23dBm |
26dBm |
±2dB |
|
MCS4 |
23dBm |
26dBm |
±2dB |
|
MCS5 |
23dBm |
26dBm |
±2dB |
|
MCS6 |
23dBm |
26dBm |
±2dB |
|
MCS7 |
22dBm |
25dBm |
±2dB |
|
MCS8 |
21dBm |
24dBm |
±2dB |
|
MCS9 |
21dBm |
24dBm |
±2dB |
|
MCS10 |
21dBm |
24dBm |
±2dB |
|
MCS11 |
19dbm |
22dbm |
±2dB |
GPIO Pin Mapping |
GPIO Pin Mapping |
|||
Pin |
Signal |
Pin |
Signal |
GPIO_0 |
AUDIO_MUTE_BUT |
GPIO_1 |
QPIC_BUSY_N |
GPIO_2 |
MIC_VOL_M |
GPIO_3 |
QPIC_WE_N |
GPIO_4 |
QPIC_RE_N |
GPIO_5 |
QPIC_DAT4 |
GPIO_6 |
QPIC_DAT5 |
GPIO_7 |
QPIC_DAT6 |
GPIO_8 |
QPIC_DAT7 |
GPIO_9 |
WPS |
GPIO_10 |
QPIC_CLE_N |
GPIO_11 |
QPIC_NAND_CE_N |
GPIO_12 |
QPIC_DAT1 |
GPIO_13 |
QPIC_DAT2 |
GPIO_14 |
QPIC_DAT3 |
GPIO_15 |
QPIC_DAT0 |
GPIO_16 |
MIC_KPD_PWR_N |
GPIO_17 |
QPIC_ALE |
GPIO_18 |
KYPD_HOME_N |
GPIO_19 |
GND |
GPIO_20 |
Boot_Config(PULL_DOWN) |
GPIO_21 |
MUTE_ON |
GPIO_22 |
ADC_RST |
GPIO_23 |
WSA_SWR_CLK |
GPIO_24 |
WSA_SWR_DATA |
GPIO_25 |
PWM_LED_RST |
GPIO_26 |
Boot_Config(PULL_DOWN) |
GPIO_27 |
WSA_EN_R |
GPIO_28 |
WSA_EN_L |
GPIO_29 |
PDM_CLK0 |
GPIO_30 |
PDM_DATA0 |
GPIO_31 |
PDM_CLK1 |
GPIO_32 |
PDM_DATA1 |
GPIO_33 |
EXT_MCLK2_ADC |
GPIO_34 |
MIC_VOL_P |
GPIO_35 |
LED_5G |
GPIO_36 |
PCIE0_WAKE |
GPIO_37 |
LED_2GS |
GPIO_38 |
SPI0_CLK |
GPIO_39 |
SPI0_CS_NI |
GPIO_40 |
SPI0_MISO |
GPIO_41 |
SPI0_MOSI |
GPIO_42 |
BLSP2_SCL |
GPIO_43 |
BLSP2_SDA |
GPIO_44 |
BLSP2_UART_RX |
GPIO_45 |
BLSP2_UART_TX |
GPIO_46 |
BLSP5_SCL |
GPIO_47 |
BLSP5_SDA |
GPIO_48 |
NC |
GPIO_49 |
Boot_Config(PULL_DOWN) |
GPIO_50 |
LED_USB0 |
GPIO_51 |
BT_PRIORITY_PTA11 |
GPIO_52 |
WLA_ACTI_PTA12 |
GPIO_53 |
BT_ACT_PTA10 |
GPIO_54 |
Boot_Config(PULL_DOWN) |
GPIO_55 |
NC |
GPIO_56 |
NC |
GPIO_57 |
NC |
GPIO_58 |
NC |
GPIO_59 |
PCIE0_CLK_REQ |
GPIO_60 |
PCIE0_RSTn |
GPIO_61 |
NC |
GPIO_62 |
SD_DET |
GPIO_63 |
SD_WP |
GPIO_64 |
MDC |
GPIO_65 |
MDIO |
GPIO_66 |
SD_LDO_EN |
GPIO_67 |
NC |
GPIO_68 |
NC |
GPIO_69 |
SPI_CLK_UART_RTSn |
GPIO_70 |
SPI_CS_UART_CTSn |
GPIO_71 |
SPI_MISO_UART_RX |
GPIO_72 |
SPI_MOSI_UART_TX |
GPIO_73 |
USB_OTG |
GPIO_74 |
NC |
GPIO_75 |
Malibu_RESET |
GPIO_76 |
NAPA_INT0 |
GPIO_77 |
NAPA_RESET |
GPIO_78 |
QTZ_INT |
GPIO_79 |
QTZ_RESET |
Boot Config Switch |
Boot_Config Switch1(S7) |
|||
Boot_Config |
Boot up Interface Select |
||
S7A |
S7B |
S7C |
|
0 |
0 |
0 |
SPI NOR. (Default) |
0 |
0 |
1 |
eMMC |
0 |
1 |
0 |
QPIC, Parallel NAND |
0 |
1 |
1 |
USB3.0 |
1 |
0 |
0 |
SPI-NOR-GPT |
S7D |
Boot up Interface Select |
||
0
|
Boot from code ram.(Default) |
||
1
|
Boot from ROM |
||
Boot_Config Switch2(S9) |
|||
Boot_Config |
Boot up Interface Select |
||
0
|
No auth.(Default) |
||
1
|
Auth is required |
Interface MAP |
Additional
Additional Information
Brand | Wallys |
---|---|
firmware | https://wallystech.com/products.php?lm=1 |
Tags
Reviews
Having a questiion ?? Contact us - info at 524wifi.com !!