Wireless Access Points
WiFi Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz and 5GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
High power + sensitivity + very good integrated 2,4+5GHz MIMO antennas =real 600Mb/s (indoor)/ 450Mb/s (outdoor) performance!!!
-
power supply 24V/0,5A for WP54/WP543/WPJ344/72 6E,7A version and more boards
$5.90
Special Price $3.00
power supply 24V,0,5A for Low Voltage (LV) devices and router boards Learn More -
CPX Pasive POE+ FE2405EU (injector) 24V/0,5A for LV series+
$9.90Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).
Work with WP54, wp543 and new LV series of router boards.
SALE !!!
Learn More -
Power Adapter 48V 0,8A for RouterBOARDs with power cord
$9.99power supply 48V, 0,8A for all HV version devices and boards Learn More -
COMPEX Passive POE+ (injector + psu) 24V/1A 7P24V30WEU
$16.00
Special Price $12.00
Passive POE, 24V/1,2A/30W Standard POE , works with all COMPEX BOARDS. Recommended for dual radio slot boards like WP543HV and WP546HV Learn More -
CPX Gigabit Power over Ethernet (PoE) PoEGP2408 24V
$19.90
Special Price $15.00
COMPEX POE GP2408 24V/0,8A gigabit passive POE mainly for LV (low Voltage) router board versionsGigabit Power over Ethernet (PoE)Compex Gigabit Power over Ethernet Injector adapter (PoEGP2410) combines electrical power with a Gigabit network data signal to product a Gigabit Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100 meters (328 Ft.) to network most PoE devices. No need to buy a PoE switch—use existing open ports from a non-PoE switch to network PoE devices. This will save you a tremendous installation cost in terms of time, material and labor. This compact device keeps the Ethernet device fully protected against any circuit shortage caused by wrong pin assignment or cable damage with short circuit protectionLearn More -
CPX MJE2.4N11 Outdoor Enclosure with 11dBi MIMO antenna 2,4GHz
$25.00
Special Price $19.00
Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Learn More
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount -
Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV versions boards)
$19.90Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)
Features:
Support 802.3AT/AT
The output voltage is 24V
The efficiency is 85%
Support surge protection
Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description : PD-25 is a 802.3at module,that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.
-
Dream 6102-5G 524WiFi WiFi6 802.11ax 2x2 MU-MIMO 5GHz QCN 6102 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$22.00DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module
Works only with DR518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6102 5GHz, max 23dBm per chain, up to 2402Mbps Single Band 5 GHz 2x2 WiFi 6E 802.11ax 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More -
TP-LINK 802.3af POE TL-POE150S adapter + psu 48V/15W
$24.90PoE Splitter Adapter, IEEE 802.3af compliant, Data and power carried over the same cable up to 100 meters, plastic case, pocket size, plug and play. Suitable for WPJ344/558 HV based devices Learn More -
DR5G17 17dBi Dual Polarized Micro strip Antenna Array 5GHz MMCX connector 802.3 11AX/AC/AN RoHS compliance, Wallys
$27.001. Feature * 17dBi Dual Polarized Micro strip Antenna Array * 5GHz of frequency * MMCX connector * Support 802.3 11AX/AC/AN * RoHS compliance 2. Application * 5GHz Wireless Communication * WLAN device, WLAN Router, e.g., AP, PIC Wireless Card 3. Description This antenna array is designed for 5GHz applications and can be easily built-in portable devices with MHF processes. It has excellent stability and sensitivity to consistently provide high signal reception efficiency. Learn More -
POE INJECTOR 48V - 56V IEEE Non-standard Gigabit Max 30W Power out, Pin Mode B Pin 4.5 (+) /7.8 (-), Wallys
$29.00Non-standard; Gigabit ;Max 30 W
Power out Pin: Mode B; Pin 4,5 (+)/7,8(-)
Input:100-240V/AC;50/60Hz
Output:DC48-56V
Caution: Indoor use only.
IEEE 802.3at;Gigabit ;Max 30 W Power out Pin: Mode -A; Pin 1,2 (+)/3,6(-) Input:100-240V/AC;50/60Hz Output:DC48-56V Caution: Indoor use only.
Learn More -
Dream 6122-6E 524WiFi WiFi6E 802.11ax 2x2 MU-MIMO 6GHz QCN 6122 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$29.00Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module
Works only with IPQ Dream 518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6122 6GHz, max 23dBm per chain, up to 2402Mbps Single Band 6GHz 2x2 WiFi 6E (802.11ax) 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More
-
Gigabit 802.3 af / at POE Injector, Active, 56V/60W, POE-G-AT60-EU, Compex
$49.00POEGAT60-EU - Active 802.3at Gigabit POE, 56V/450mA/25,4W Standard POE , works with all new BOARDS HV version. Recommended for WPQ864 boards.
IEEE 802.3at detection, power feeding by 4 pins
IEEE 802.3at detection, power feeding by 4 pins Learn More -
SALE - indoor 11bgn AP MMZ531HV, 2,4GHz, omni Pyramidal antenna, POE,
$59.00
Special Price $49.99
MMZ531HV
Indoor 2,4GHz 11bgn access point with OMNI Payramid antena and POE support 802.3af
MMZ531 is a high-performance indoor Access Point with integrated PoE. Using Qualcomm Atheros QCA9531 network processor of speed 650MHz , coupled with 802.11bgn wireless technology and 2x2 MIMO technique enable it to support high-speed data transmission of up to 300Mbps. DC Power 1x DC Jack Connector: 24-56V
Power Over Ethernet 1x IEEE 802.3at or Passive PoE input minimum 36V
Power Consumption 7 Watts (Max)
Learn More -
MaxLink PSAT-5-4P PoE switch, 5x LAN/4x PoE, 802.3at, 96W, 10/100Mbps
$66.00Product description
PSAT-5-4P is 5 port 10/100Mbps unmanaged switch with 4 PoE ports. Switch automatically detecting and powering 802.3af/at (up to 30W/port) devices on 1 - 4 ports. 5th port is normal ethernet ports without PoE functionality as uplink port. Total PoE budget for devices is 96W with external power adapter 48V/2A, which is included the package.
With this switch you can power wide range of IP cameras, VoIP telephones, WiFi AP and other devices supporting 802.3af/at PoE standard.
Learn More