Wireless Access Points
WiFi Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz and 5GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
High power + sensitivity + very good integrated 2,4+5GHz MIMO antennas =real 600Mb/s (indoor)/ 450Mb/s (outdoor) performance!!!
-
DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6
$149.99DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support
Samples are available now! OpenWRT firmware and OpenWiFi supported
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.
Learn More -
Dream 6102-5G 524WiFi WiFi6 802.11ax 2x2 MU-MIMO 5GHz QCN 6102 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$22.00DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module
Works only with DR518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6102 5GHz, max 23dBm per chain, up to 2402Mbps Single Band 5 GHz 2x2 WiFi 6E 802.11ax 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More -
Dream 5018 S 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys
$89.00DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot
Samples are available now!
11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support
Features:
Dual-core ARM 64bit A53@1.0GHz Processor
512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash
2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate
Support BT5.1
M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;
M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot
POE 802.3 bt,at,af support
Support Openwifi
Product Description
DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment
Learn More -
Dream 6122-6E 524WiFi WiFi6E 802.11ax 2x2 MU-MIMO 6GHz QCN 6122 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$29.00Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module
Works only with IPQ Dream 518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6122 6GHz, max 23dBm per chain, up to 2402Mbps Single Band 6GHz 2x2 WiFi 6E (802.11ax) 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More
-
DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi
$89.00IPQ 4019 / 4029 Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board
- Featuring with industrial-grade IPQ4019/IPQ4029 chipset
- Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module
- Support 4.940GHz to 5.825GHz Frequency Range
- Support 2.400GHz to 2.482GHz
- Support 2 x 5G MMCX Connectors and 2x2.4G MMCX
- Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth
- Support 11ABGN/AC
- RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
- FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
- Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
- USB 3.0 support ! miniPCIe LTE-A module supprted !
-
Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!
-
COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563
$99.99WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot
Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac
- Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
- 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
- 128MB System Memory
- 16MB NOR Flash
- 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
- Supports Dynamic Frequency Selection (DFS)
- Single SIM Holder on-board
- Support 2 x Gigabit Ethernet Port
Applications :
• 802.11g/n + 802.11a/n/ac Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
Power solution :
DC Jack: 12-24V
PoE: IEEE 802.3af 48V,
IEEE 802.3at 56V,
or Passive PoE 36-56V DC
Learn More -
CPX MJE2.4N11 Outdoor Enclosure with 11dBi MIMO antenna 2,4GHz
$25.00
Special Price $19.00
Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Learn More
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount -
SALE - indoor 11bgn AP MMZ531HV, 2,4GHz, omni Pyramidal antenna, POE,
$59.00
Special Price $49.99
MMZ531HV
Indoor 2,4GHz 11bgn access point with OMNI Payramid antena and POE support 802.3af
MMZ531 is a high-performance indoor Access Point with integrated PoE. Using Qualcomm Atheros QCA9531 network processor of speed 650MHz , coupled with 802.11bgn wireless technology and 2x2 MIMO technique enable it to support high-speed data transmission of up to 300Mbps. DC Power 1x DC Jack Connector: 24-56V
Power Over Ethernet 1x IEEE 802.3at or Passive PoE input minimum 36V
Power Consumption 7 Watts (Max)
Learn More -
Gigabit 802.3 af / at POE Injector, Active, 56V/60W, POE-G-AT60-EU, Compex
$49.00POEGAT60-EU - Active 802.3at Gigabit POE, 56V/450mA/25,4W Standard POE , works with all new BOARDS HV version. Recommended for WPQ864 boards.
IEEE 802.3at detection, power feeding by 4 pins
IEEE 802.3at detection, power feeding by 4 pins Learn More -
Wallys DR-AP6018-S Outdoor WiFi 6 AP, 802.11ax 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
$169.00Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !
Description
-
DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).
Learn More
-
-
Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
$149.00Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
Planar Antenna
■ 2 x 2 MIMO 5G Antenna
■ 5G: 16dbi
Available for orders, lead time is 2-3 weeks.
Learn More -
Wallys DR-AP4029 Indoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 + 5GHZ omni 4 / 6dBi antennas
$125.00MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi
Description
DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
Onmi Antenna
■ 2 x 2.4G&5G Antenna
■ PCB Antenna
■ 2.4G: 4dbi ;5G: 6dbi
Enclosure
■ Dimension: 220x 220 x 42.54mm
■ UV Protected and Durable ABS Radome
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
-
MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT
$139.00Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.
The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G version 7 now includes:
- 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) .
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode.
- Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT
$149.00DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported
2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface
■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm
■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard
Learn More -
DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys
$139.00Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board
2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz
■ SMA Plug interface ■ Plastic rod of black
■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029
Dimension: 132x 119 x 34 mm
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt