DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module

Works only with DR518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6102  5GHz, max 23dBm per chain, up to 2402Mbps  Single Band 5 GHz 2x2 WiFi 6E 802.11ax  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Learn More

Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module

Works only with IPQ Dream 518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6122  6GHz, max 23dBm per chain, up to 2402Mbps  Single Band 6GHz 2x2 WiFi 6E (802.11ax)  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Learn More

Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Dual-core ARM 64bit A53@1.0GHz Processor

1G DDRL3L System Memory

8MB NOR Flash, 256MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

M.2 Card Slot for QCN9074 WIFI 6E Card

M.2 Card Slot for QCN6122-6E Card

M.2 Card Slot for QCN6102-5GCard

Support Openwifi

DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card. 

Learn More

DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Features:

Dual-core ARM 64bit A53@1.0GHz Processor

512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

Support BT5.1

M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

POE 802.3 bt，at，af support

Support Openwifi

Product Description

DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

Learn More

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Learn More

WPJ428HV - 2.4GHz & 5GHz 2×2 802.11ac Wave 2 MU-MIMO Wireless Embedded Board with M.2 Slot

Learn More

1. Feature * 17dBi Dual Polarized Micro strip Antenna Array * 5GHz of frequency * MMCX connector * Support 802.3 11AX/AC/AN * RoHS compliance 2. Application * 5GHz Wireless Communication * WLAN device, WLAN Router, e.g., AP, PIC Wireless Card 3. Description This antenna array is designed for 5GHz applications and can be easily built-in portable devices with MHF processes. It has excellent stability and sensitivity to consistently provide high signal reception efficiency. Learn More

power supply 48V, 0,8A for all HV version devices and boards Learn More

power supply 24V,0,5A for Low Voltage (LV) devices and router boards Learn More

PoE Splitter Adapter, IEEE 802.3af compliant, Data and power carried over the same cable up to 100 meters, plastic case, pocket size, plug and play. Suitable for WPJ344/558 HV based devices Learn More

Product description

 

PSAT-5-4P is 5 port 10/100Mbps unmanaged switch with 4 PoE ports. Switch automatically detecting and powering 802.3af/at (up to 30W/port) devices on 1 - 4 ports. 5th port is normal ethernet ports without PoE functionality as uplink port. Total PoE budget for devices is 96W with external power adapter 48V/2A, which is included the package.

With this switch you can power wide range of IP cameras, VoIP telephones, WiFi AP and other devices supporting 802.3af/at PoE standard.

Learn More

Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)

Features:

Support 802.3AT/AT 

The output voltage is 24V

The efficiency is 85% 

Support surge protection 

Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals

 

Product Description : PD-25 is a 802.3at module，that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.

 

Learn More

OVERVIEW

The POE33024PF is a full gigabit unmanaged PoE fiber switch. It has 24*10/100/1000M RJ45 ports and 2*1000M SFP slot ports. Port 1-24 can support IEEE802.3af/at standard PoE power supply. single port PoE power reaches 30W, and the maximum PoE output power is 400W(at-600W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, visual intelligent building intercom through network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprises. Unmanaged model, plug and play, no configuration, easy to use.

FEATURE

Full gigabit access, gigabit SFP port uplink

All series support "gigabit Ethernet port and gigabit SFP fiber port " combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Support non-blocking wire-speed forwarding.

Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

Intelligent PoE power supply

24*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.

IEEE 802.3af/at PoE standard, without damaging non-PoE devices.

Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

Stable and reliable

Low power consumption, galvanized steel casing. The Fan active cooling.

Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

CCC,CE, FCC, RoHS ◇ Plug and play, no configuration, simple and convenient.

The user-friendly panel, it can show the device status through the LED indicator of PWR, Link ,PoE.

Learn More

Non-standard; Gigabit ；Max 30 W

Power out Pin: Mode B; Pin 4,5 (+)/7,8(-)

Input:100-240V/AC;50/60Hz

Output:DC48-56V

Caution: Indoor use only.

IEEE 802.3at；Gigabit ；Max 30 W Power out Pin: Mode -A; Pin 1,2 (+)/3,6(-) Input:100-240V/AC;50/60Hz Output:DC48-56V Caution: Indoor use only.

Learn More