Wireless Access Points
WiFi Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz and 5GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
High power + sensitivity + very good integrated 2,4+5GHz MIMO antennas =real 600Mb/s (indoor)/ 450Mb/s (outdoor) performance!!!
-
COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563
$99.99WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot
Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac
- Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
- 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
- 128MB System Memory
- 16MB NOR Flash
- 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
- Supports Dynamic Frequency Selection (DFS)
- Single SIM Holder on-board
- Support 2 x Gigabit Ethernet Port
Applications :
• 802.11g/n + 802.11a/n/ac Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
Power solution :
DC Jack: 12-24V
PoE: IEEE 802.3af 48V,
IEEE 802.3at 56V,
or Passive PoE 36-56V DC
Learn More -
Gigabit 802.3 af / at POE Injector, Active, 56V/60W, POE-G-AT60-EU, Compex
$49.00POEGAT60-EU - Active 802.3at Gigabit POE, 56V/450mA/25,4W Standard POE , works with all new BOARDS HV version. Recommended for WPQ864 boards.
IEEE 802.3at detection, power feeding by 4 pins
IEEE 802.3at detection, power feeding by 4 pins Learn More