WDS PLC splitters 1/2-1/64.

Our splitters are equiped with default connector type: SC/PC !!!!

PLC Splitter,SC/PC,Diameter 2mm,Patch Cord 1Meter,small plastic housing Splitters 100% compatible with GE PON wodaplug networking products.

This PLC splitter is Build to to order only, lead time is usually 3-4 weeks.

Learn More

xPON ONU Wodaplug ® FD504G-X-R410 4GE port, with EPON / GPON autodetect 

FD504G-X-R410 dual-mode ONU is one of the XPON optical network unit design to meet the requirement of the broadband access network.It apply in FTTH/FTTO to provide the data, video service based on the XPON network.

FD504G-X-R410 dual-mode ONU supports EPON and GPON two modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON or EPON adaptive access.

FD504G-X-R410have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. Itfully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.

SC/UPC single mode single fiber 

GPON：FSAN G.984.2 standard, Class B+ 

EPON：1000BASE-PX20+ symmetric 

GPON：2.488Gbps/1.244Gbps downstream/upstream 

EPON：1.25Gbps downstream/upstream

Learn More

All In One EOC Master with XPON ONU and Optical receiver - EOC1121ALL-O 60V, 700Mbps, 2x EOC module, 1x XPON ONU, 1x HFC CATV Optical receiver, WEB Management, max 256 slaves, VLAN, IGMP, QoS ...

Description :

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

The All-In-One master is designed to provide Internet service to subscriber’s home through the existing coaxial access network. With XPON, EOC and HFC technology , the All-In-One product meets the CATV broadcasting, VOD and Internet service requirement of cable operators for FTTB/FTTC. It build with XPON ONU, EOC master and Optical Receiver module in one housing. The Optical Receiver module received the optical signal from the Optical Transmitter of HFC network, and the signal processed by the PD, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 104dBuv( 4*RF output). Ethernet data is delivered to ONU through the XPON network form the OLT. The EOC Master module meets Home-plug AV standards, is designed based on Qualcomm AR7410 chip-set with high anti-jamming capability OFDM technology. It will modulate the Ethernet data into EOC RF signal in the 7.5-65MHz .The EOC signal and CATV signal (87~860MHz) can run on one coaxial cable without interference. The EOC Master can provide high speed data service at 700Mbps PHY Layer speed, the MAC Layer throughput is up to 320Mpbs. Learn More

xPON ONU Wodaplug ® FD504G-X-R410 4GE port, with EPON / GPON autodetect 

FD504G-X-R410 dual-mode ONU is one of the XPON optical network unit design to meet the requirement of the broadband access network.It apply in FTTH/FTTO to provide the data, video service based on the XPON network.

FD504G-X-R410 dual-mode ONU supports EPON and GPON two modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON or EPON adaptive access.

FD504G-X-R410have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. Itfully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.

SC/UPC single mode single fiber 

GPON：FSAN G.984.2 standard, Class B+ 

EPON：1000BASE-PX20+ symmetric 

GPON：2.488Gbps/1.244Gbps downstream/upstream 

EPON：1.25Gbps downstream/upstream

Learn More

Providing simultaneous measurement at EPON/GPON/GEPON for all three wavelengths on the fiber (1490nm,1550nm,1310nm )
Used in Burst mode measurement of 1310nm upstream
Convenience for threshold setting, which can set the threshold on the tester
USB communication port enables data transfer to a PC
Offers up to 10 different threshold sets in total
User self-calibration can be retrieved in computer through the software.
10 minutes Auto-off function can be activated or deactivated with keypad operation.

Learn More