Currency:
Gateways & 4G 5G LTE Routers

mtk 7621 ZBT WG1608-5G truly 5G 4G LTE  metal body dual band wifi router, 2.4GHZ + 5GHz, Rooter and OpenWRT firmware support, no USB port

mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, Rooter and OpenWRT firmware support, no USB port

Be the first to review this product

$69.90

In stock

SKU: mtk7621WG1608-5G

Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included


Max. LAN Data Rate: 867Mbps


Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n


Wi-Fi Supported Frequency: 2.4G & 5G


Wi-Fi Transmission Standard: 802.11ac


Wired Transfer Rate: 10/100/1000Mbps


2.4G Wi-Fi Transmission Rate: 300 Mbps


Encryption Type: WPA-PSK


Function: FireWall, QoS, VPN


LANPorts:4 WAN Ports:1


Certification: FCC CE


5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)


Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs), Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !


Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)


Since the USB chip out of stock during long period, so the factory produced a batch of WG1608 routers without USB port.

Description

Details

Newer Mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 

Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

Max. LAN Data Rate: 867Mbps

Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n
Wi-Fi Supported Frequency: 2.4G & 5G
Wi-Fi Transmission Standard: 802.11ac
Wired Transfer Rate: 10/100/1000Mbps
2.4G Wi-Fi Transmission Rate: 300 Mbps
Encryption Type: WPA-PSK
Function: FireWall, QoS, VPN
LAN Ports:4
WAN Ports:1
Certification: FCC CE
5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)
Product name: ZBT WG1608-5G M.2 slot for CAT12 CAT16 Module Wifi Router
Chipset: MT7621A (880MHz)
FLASH/RAM: 16MB/256MB
Interface: 1WAN+4LAN+1 Sim card slot+1 TF Port
Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b
Transmission rate: 1200Mbps
2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO
Support: M.2 (4G and 5G choose one - need to be ordered separately, any 4G/5G modem not included in - please select requested LTE module base don yoru region and we will install it for you)

Since the USB chip out of stock during long period, so the factory produced a batch of WG1608 routers without USB port.


 WG1608-5G is a 5G CPE product for home use, dialing or dialing through 5G mobile communication
1000Mbps WAN port dial-up access to the Internet, and then through wireless WiFi 5 and 1000Mbps wired local area
Net sharing internet network.


Relevant standard specifications:


 USB3.0/USB2.0 bus standard , optional, not by default
 PCI-Express bus standard
 TF Card interface standard
 SIM/USIM interface standard
 IEEE802.11n/g/b/a/ac
 IEEE802.3/802.3u/802.ab
 PCI Express M.2 Specification Rev1.1
 Mini PCI Express Card Electro mechanical Specification Revision
1.0-2003
 5G mobile communication standard, which is determined by the selected 5G mobile communication module

Main features of the product


 Adopt MT7621A scheme, MIPS dual-core CPU, main frequency up to 880MHZ
 Use independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN
 2.4G rate is up to 300Mbps, 5.8G rate is up to 867Mbps, 5.8G supports MU-MIMO
 Using high-speed 256MB DDR3, with 16MB Nor Flash
 1WAN, 4LAN full 1000M adaptive network port, support auto flip (Auto MDI/MDIX)
 Support USB3.0 (optional - not in default version) and TF card storage interface, can be used to expand SMABA or FTP network storage function
 Support "one-key flashing mode", that is, long press the reset button to enter the rescue flashing mode
 Built-in M.2 standard interface, which can be used to connect to 5G mobile communication module
 External standard SIM card interface, support SIM/USIM card
 External high-gain omni-directional antenna, wireless signal 360 degrees without dead angle



Ethernet Port
1*WAN port,1000Mbps supports auto flip (Auto MDI/MDIX)
Compliant with IEEE 802.3/802.3u/802.ab
4*LAN port,1000Mbps support auto flip (Auto MDI/MDIX)
Compliant with IEEE 802.3/802.3u/802.ab

USB Interface
1*USB3.0 slot  (optional, not by default) 

TFcard
Interface
TF card slot

SIMcard Interface
1*sim card slot, support SIM/USIM

Power Interface
DC5.0*2.1MM interface

Button
1*reset

Antennas
2* omnidirectional 5dbi 2.4G and 5.8G antennas
4*omnidirectional 5dbi 5G mobile communication antennas, 1*GPS antenna

M.2 Interface
Built-in M.2 slot, support PCIE and USB3.0 bus


Indicator function introduction


WAN LED is always on when connected to the Internet, and flashes when there is data communication
The LAN1 LED is always on when connected to the Internet, and flashes when there is data communication
The LAN2 LED is always on when connected to the Internet, and flashes when there is data communication
The LAN3 LED is always on when connected to the Internet, and flashes when there is data communication
The LAN4 LED is always on when connected to the Internet, and flashes when there is data communication
The power LED is always on when the power is turned on, but it is not on when the power fails or is not connected to the power supply
2.4G WIFI LED is always on when the 2.4G WIFI function is turned on, flashes when there is data communication, and it is not on when the 2.4G WIFI or 2.4G WIFI function is not turned on.
5.8G WIFI LED is always on when the 5.8G WIFI function is turned on, flashes when there is data communication, and it is not on when the 5.8G WIFI or 5.8G WIFI function is not turned on
The mobile 5G LED routing system recognizes and successfully mounts the 5G mobile communication module and always lights up, but it does not light when the 5G mobile communication module fails or is not connected to the 5G mobile communication module.
Internet LED The device dials successfully through the 5G mobile communication module or WAN port, and it communicates with the Internet normally. It is always on, and it is not on when the device cannot access the Internet.

Hardware platform introduction


Processor MT7621A MIPS dual-core CPU, 880MHZ frequency

2.4G WIFI chip MT7603EN IEEE 802.11n/g/b, maximum rate 300Mbps

5.8G WIFI chip MT7613AEN IEEE 802.11ac/a, the highest rate is 867Mbps

RAM DDR3 256MB

Flash Nor Flash 16MB Does not support NAND Flash


Software configuration information


Default IP 192.168.1.1
Username/password root/admin for OpenWRT fw, for Viper fw its : root / Password1234
2.4G SSID WIFI-XXXXXX (X is the last 6 digits of MAC address), no password by default
5.8G SSID WIFI-5G-XXXXXX (X is the last 6 digits of the MAC address), no password by default

for Viper firmware WiFi default password is "LakeWater561"

Additional

Additional Information

Brand ZBT link
firmware http://www.wifi5.eu

Tags

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews

  1. Be the first to review this product

WRITE YOUR REVIEW

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Having a questiion ?? Contact us - info at 524wifi.com !!