Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.
EOC1121L series are point-to-multipoint EoC (Ethernet over Coax) solution that efficiently extends 1000M Ethernet circuits to over 700-1000 meters (2,624feet) upto700Mbps using existing coaxial cable. The FHC112xL will allow Ethernet connectivity in existing facilities or homes without pulling extra cable. This is perfect solution for Ethernet on the factory floor where systems have been upgraded from slower serial communication to Ethernet networking. The EOC1121L is a master/bridge unit which will connect to multiple EOC1121R4 subscriber units.
Coated with airtight aluminum shell that prevents water and dust. A wide range of operation temperature from -25℃ to 55℃
Occupies the Low Frequency Band under 7.5~65MHz. Strong capacity of anti-interference. High bandwidth.
High-speed up to 700Mbps communications link over existing coaxial cable, @up to 700-1000 meters (2624 feet)
Provide 2 1000M Ethernet interfaces to connect up ONU(Optical Network Unit) and Ethernet Switch or to serve as Up-link to under-connect EOC11xxRx
Support SNMP management and MIB standard
Support VLAN(802.1), QoS(802.1p), IGMP
Support remote management and auto-upgrade
Chipset Intellon INT7410, RTL8198
Protocol HomePlug AV
IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3u, IEEE
802.3x,HTTP, SNMP, TELNET
Phisycal Speed 700Mbps
Modulation Bandwidth 7.5 MHz~65 MHz
Modulation Technology OFDM,1024/256/64/16QAM,QPSK,BPSK
Max. Slave number 128
Encryption mode 128-bit AES encrypted
VLAN Support max. 16 VLANs
Limitation of port speed Support minimum 64Kbps granularity
QoS Support VLAN priority
Working mode CSMA/CA
Multicast support Support IGMP manage Multicast diagram
Management mode Support SNMP, WEB, CLI multi-managed mode
Ethernet Interface 2 GE(1000M) Ports
Coax. Cable Interface : one IN one OUT
Transmit Power 0±3dBm
Reflection loss >16dB
Insertion loss 1dB
Receiving sensitivity -65dB
Power Consumption ≦10W
Power Supply 220VAC from power outlet or 60VAC from Coax network - pls select an option bellow
Working Temperature -30℃~60℃
Storage Temperature -40℃~70℃
Working Humidity 10%~90%, non-condensation
Storage Humidity 5%~90%, non-condensation
Environmental standards RoHS
Product Size 260*200*110mm
Product Weight N.W.: 2.2kgs
powering option AC 230V
The EoC (Ethernet over COAX)provides Ethernet Access through Coaxial Network, offer Cable TV signal transmission for Operator based on existing Cable network as well as Broadband Data Access. In Network Application, EoC include Head End Equipment called Master and Terminal Equipment called Slave, one Master can support 128 Salvers, network structure can be star type or tree type.
The product of EoC master which can provide the transmission of broadband data service via coax, which is suitable for application in a wide range of both residential (in-home) and commercial (offices, apartments, hotels, warehouses) network applications in which the coax can be utilized. There is never any need to install new wires. These outdoor devices enable the effortless creation of a high-speed network that supports video, voice and data.
The product of EoC slave for end-user that work with EoC master devices to establish Ethernet transmission channels over coaxial cables.
Having a questiion ?? Contact us - info at 524wifi.com !!