Home
ZBT Z8102AX-M2-T — AX3000 Wi-Fi 6 5G Router with Quectel RM500U-EA for Europe

Networking

ZBT Z8102AX-M2-T — AX3000 Wi-Fi 6 5G Router with Quectel RM500U-EA for Europe

$239.90

In stock

SKU: ZBT Z8102AX-M2-T+RM500UEAAA for EU

A complete 5G gateway for your home office, business or flexible installation. This ZBT Z8102AX-M2-T offer includes one Quectel RM500U-EA modem for European networks. Share cellular or wired Internet through AX3000-class dual-band Wi-Fi 6 and four Gigabit LAN ports.

MediaTek MT7981B dual-core 1.3 GHz platform, 1 GB DDR4 and 128 MB NAND.
Wi-Fi 6: up to 2402 Mbit/s on 5 GHz and approximately 574 Mbit/s on 2.4 GHz.
1× Gigabit WAN + 4× Gigabit LAN, detachable antennas and an expandable M.2 modem platform.

Supplied configuration: ZBT router + one RM500U-EA modem. Bring your operator SIM and configure the APN for your service.

Quantity:

-OR-

Add to Wishlist

Description

Details

ZBT Z8102AX-M2-T · RM500U-EA included

One gateway. Cellular Internet, Wi-Fi 6 and wired networking.

Give your home office or business a flexible Internet connection: a Quectel 5G modem for European networks, dual-band Wi-Fi 6 for everyday devices and five Gigabit Ethernet ports for a well-connected workspace.

RM500U-EA includedOne Quectel 5G modem supplied in this offer.

AX3000 Wi-Fi 6Concurrent 2.4 and 5 GHz wireless networking.

5 Gigabit portsOne WAN plus four LAN connections.

MediaTek MT7981BDual-core platform with 1 GB DDR4 memory.

A practical gateway for places that need flexibility.

Home officeConnect workstations by Gigabit Ethernet and share the network with laptops, phones and smart devices over Wi-Fi 6.

Small businessBring cellular connectivity to a workshop, retail space or branch while retaining a wired WAN option.

Temporary locationsUse a compatible operator data plan for an office move, site cabin or short-term installation with indoor operating conditions.

Technical deploymentsWork with the modem, antenna layout and OpenWrt-based platform to shape a configuration around your own network needs.

The value is in the complete path: a cellular modem, routing hardware, local Wi-Fi and Ethernet in one indoor device. Choose the operator and placement for the installation, then configure the connection and local network to suit your users.

Your Internet sourceOperator SIM / cellular WAN or wired WAN

ZBT + Quectel modemRouting and local network configuration

Your connected devicesWi-Fi 6 and four Gigabit LAN ports

The router hardware, clearly specified.

Router / supplied modem	ZBT Z8102AX-M2-T with one Quectel RM500U-EA / RM500UEAAA modem for the European offer
Processor	MediaTek MT7981B; dual-core ARM Cortex-A53, up to 1.3 GHz
Wireless chipset	MediaTek MT7976CN
RAM / primary flash	1 GB DDR4 / 128 MB SPI NAND
Wi-Fi	802.11ax Wi-Fi 6, concurrent 2.4 GHz and 5 GHz; compatible a/b/g/n/ac modes
Wi-Fi class	AX3000 class; manufacturer figures approximately 573–574 Mbit/s at 2.4 GHz and up to 2402 Mbit/s at 5 GHz
Ethernet	1× 1000 Mbit/s WAN + 4× 1000 Mbit/s LAN
Modem expansion	One installed Quectel RM500U-EA modem connected through the router’s USB 3.0 modem interface.
SIM platform	Nano-SIM interfaces; the manufacturer describes two Nano-SIM positions and eSIM provisions at platform level. Set up the SIM associated with the supplied modem.
Antenna system	12 detachable external antennas in the illustrated Z8102AX-M2-T platform, covering cellular and dual-band Wi-Fi paths
Controls / connection	Reset and Mesh controls; DC 5.5 × 2.1 mm input connector
Firmware platform	Factory OpenWrt-based software; select upgrade images by the exact hardware revision and flash layout

This is the Z8102AX-M2-T platform. Match any expansion parts and firmware to the delivered revision. Optional eMMC storage and additional modems are separate platform configurations.

ZBT Z8102AX-M2-T metal router with external antennas and Gigabit Ethernet ports — Detachable antenna layout, metal enclosure and a clearly accessible wired-network panel.

A European 5G configuration built around RM500U-EA.

The included Quectel modem supports 5G SA and NSA, with LTE fallback. Match its regional bands to your operator and data plan. The modem’s role is the cellular connection; the ZBT platform distributes that connection to your Ethernet and Wi-Fi devices.

5G NR SA	n1 / n3 / n5 / n7 / n8 / n20 / n28 / n38 / n40 / n41 / n66 / n77 / n78
5G NR NSA	n1 / n3 / n7 / n28 / n38 / n40 / n41 / n77 / n78
LTE FDD	B1 / B2 / B3 / B4 / B5 / B7 / B8 / B20 / B28 / B66
LTE TDD	B38 / B40 / B41
WCDMA	B1 / B2 / B5 / B8

See the RM500U-EA module specifications and integration guide.

Understand each part of the connection.

Local Wi-Fi link rates

5 GHz: up to 2402 Mbit/s

2.4 GHz: approximately 574 Mbit/s

Theoretical radio link rates, shown separately. AX3000 is the combined Wi-Fi class; application throughput depends on the client, channel width, interference and traffic.

The RM500U-EA radio has its own theoretical 5G limits: up to 2.6 Gbit/s downlink in NSA mode, or 2 Gbit/s in SA mode. A single Gigabit Ethernet connection negotiates at 1 Gbit/s, so evaluate each part of the route separately. For an installation test, start with one wired computer, then compare Wi-Fi clients and placement.

Choose placement by signal quality.

Position the router where the mobile signal is clean and the enclosure can ventilate. Compare RSRP, RSRQ and SINR together with download, upload and packet loss. Keep the cellular and Wi-Fi antenna connections matched to their labelled roles. Indoor obstacles, feeder losses and local interference all influence the result.

From box to working network: a straightforward sequence.

Prepare the mobile service.
Use an active data SIM suitable for router use. Keep the operator APN, PIN and any authentication details ready. Confirm coverage and bands for the site.
Connect antennas and SIM with power off.
Fit the supplied antennas to their labelled cellular/Wi-Fi positions, tighten gently and insert the SIM into the interface associated with the installed modem.
Power up and connect by Ethernet.
Use the supplied router power adapter and a LAN port for the first configuration. Allow the device to complete startup before opening its management interface.
Secure the local network.
Use the management address and login instructions delivered with the unit. Set a strong administrator password and secured Wi-Fi credentials before connecting everyday devices.
Configure the cellular connection.
Select the installed RM500U-EA, enter the correct APN and verify SIM readiness, network registration and the data session. Keep the initial band selection appropriate to the operator.
Validate the installation.
Confirm wired Internet, DNS and a Wi-Fi client connection. Check signal measurements and sustained traffic, then save a configuration backup.

Choose your Internet policy deliberately.

Use the cellular modem as the selected WAN source, or configure the wired WAN for your network. Save and test the selected WAN configuration before putting the router into service.

An OpenWrt-based platform with a careful upgrade path.

Start with the supplied configuration.

The manufacturer supplies an OpenWrt-based routing platform. Use the installed web interface to configure networking and the modem. Before upgrading, record the exact Z8102AX hardware revision, installed firmware, flash layout and modem firmware, and export a working configuration backup.

OpenWrt and ROOTer development options

The OpenWrt project contains a dedicated ZBT-Z8102AX v2 target in the MediaTek Filogic platform. Choose the device profile for the exact board and storage layout; a factory-install image and a sysupgrade image have different purposes. ROOTer is an additional modem-focused firmware route for model-matched builds. Confirm a current compatible build and its installation instructions before changing the supplied software.

Keep routing firmware and modem firmware separate.

A router OS upgrade and a Quectel modem update change different components. Save the starting versions and carry out one supported change at a time. Confirm Ethernet, Wi-Fi, SIM registration and the mobile data path after each change. Factory recovery should follow the procedure for the exact device revision.

Get model-specific firmware and configuration guidance.

Build a balanced antenna and accessory configuration.

The supplied router and its installed RM500U-EA modem form one complete cellular gateway. Match external antennas and cables to the labelled connectors and the intended operator bands.

For an external cellular antenna, match the operating bands, connector gender and cable loss to the installation. Keep the RF cable short where practical and route it without strain. Select Ethernet cabling for a stable Gigabit link to your wired devices.

Cellular antennas · RF cables and pigtails · Discuss your antenna installation

A useful diagnosis starts with the right question.

Router starts, Internet setup pending	Confirm the selected WAN source, SIM readiness and APN. Check modem registration before changing Wi-Fi settings.
Mobile connection works, a client has no Internet	Check that the client is on the intended LAN/Wi-Fi network, receives an address and uses the correct gateway and DNS.
Mobile speed changes through the day	Compare the operator band, signal quality and time of test using a wired client. Try a better router position and record the result.
Wi-Fi performance varies by room	Compare 2.4 and 5 GHz clients, channel conditions and the distance/obstacles to the router. Place the router for both coverage and mobile signal.
Issues follow a firmware change	Check the device profile, storage layout and modem packages. Use the documented backup/recovery path for that exact revision.

When contacting support, include the router label, firmware versions, modem identity, operator/APN, connection type and signal readings. Those details help turn a general symptom into a precise next step.

Choose the complete configuration with confidence.

Is the Quectel modem included in this offer?

Yes. This product is the ZBT Z8102AX-M2-T router supplied with one RM500U-EA / RM500UEAAA modem for the European configuration. The separate router-only offer has a different SKU and price.

What does AX3000 mean here?

It is the Wi-Fi class combining approximately 574 Mbit/s at 2.4 GHz and up to 2402 Mbit/s at 5 GHz. Those are theoretical radio link rates. A device uses the band and link supported by that client.

What do I need to start using cellular Internet?

An active compatible operator SIM, the APN and a location with suitable coverage. Follow the antenna, power and first-login steps in the setup guide.

Can I use the wired WAN as well?

Yes. The router has a Gigabit WAN port and four Gigabit LAN ports. Select and configure the Internet-source policy in the installed firmware.

Can this router run OpenWrt?

The platform uses factory OpenWrt-based software, and the upstream project has a ZBT-Z8102AX v2 target. Select the profile and installation procedure for the exact hardware and flash layout supplied.

Keep the setup information with your installation.

Download the router setup & diagnostics guide (PDF)Download the RM500U-EA integration guide (PDF)Explore the included modem

Give your network a flexible 5G foundation.

Choose this complete ZBT + Quectel configuration for European cellular connectivity, dual-band Wi-Fi 6 and Gigabit wired devices. For another operator region or a specific modem/antenna configuration, send us the requirements before ordering. Estimated dispatch: 2–3 days, subject to current stock and checkout delivery information.

Discuss your installation