DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports

Samples are available now! OpenWiFi and OpenWRT firmware supported.

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Dual-core ARM 64bit A53@1.0GHz Processor

1G DDRL3L System Memory

8MB NOR Flash, 256MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

M.2 Card Slot for QCN9074 WIFI 6E Card

M.2 Card Slot for QCN6122-6E Card

M.2 Card Slot for QCN6102-5GCard

Support Openwifi

DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card. 

DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Features:

Dual-core ARM 64bit A53@1.0GHz Processor

512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

Support BT5.1

M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

POE 802.3 bt，at，af support

Support Openwifi

Product Description

DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module

Works only with DR518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6102  5GHz, max 23dBm per chain, up to 2402Mbps  Single Band 5 GHz 2x2 WiFi 6E 802.11ax  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module

Works only with IPQ Dream 518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6122  6GHz, max 23dBm per chain, up to 2402Mbps  Single Band 6GHz 2x2 WiFi 6E (802.11ax)  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

The Intel® Wi-Fi 6 AX200 NGW adapter supports the new IEEE 802.11ax standard – Wi-Fi 6 technology and is Wi-Fi CERTIFIED 6™.3 The product supports 2x2 Wi-Fi 6 technology, including new features such as UL and DL OFDMA and 1024QAM, delivering data rates of up to 2.4Gbps4 and increased network capacity as well as Bluetooth® 5.1 support. These new features deliver a significant improvement in user experience in dense deployments, supporting fast uploads and downloads, lower latency and longer battery life compared to solutions supporting 802.11ac. Combined with Intel® Core™ processors and exceptional Intel wireless innovations, the Intel® Wi-Fi 6 AX200 module can provide Gigabit wireless speed4 and dramatically improve your connected experience at home, work, or on the go.

By implementing the new 802.11ax standard with its unique features such as OFDMA, 1024QAM, Target Wake Time (TWT) and spatial reuse, Intel® Wi-Fi 6 AX200 module enables smooth streaming of high-resolution videos, fewer dropped connections, and faster connections farther away from the router and in dense environments. When using Wi-Fi 6 technology with 1024QAM and 160MHz channels, Intel® Wi-Fi 6 AX200 module can deliver nearly 3x higher peak data rates1 (up to 2.4Gbps) and up to 4x capacity improvement in dense or congested environments comparing to 802.11ac.2
Intel® Wi-Fi 6 AX200 module supports the new WPA3* security features, enabling next-generation authentication and military-grade encryption.

Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721O 5G NR outdoor version now includes:

• outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

Hardware: 

MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

1x M.2 b.key USB 3.0 as 5Gnr interface,

1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

Lightning protection design

 Heat sink at botoon of 5Gnr modem

NEW X-WRT firmware available !!!

Testing samples available now!

QCN 9024 WIFI 6 / 6E 11AX 4X4 m.2 Tri band selectable WIFI MODULE ( 2,4GHz or 5Ghzr or 6GHz triband support) :

Product Description

DR9074-Triband based on QCN9024  Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Features

■ Qualcomm Atheros QCN9024

■ Maxim 23 dBm per chain,up to 4949Mbps

■ Data Rateup to 4949Mbps

■ Support  Tri Band 2.4GHz&5GHz&6GHz 4x4 WiFi 6E (802.11ax)

■ 4 spatial streams (4SS)

■ M.2 E Key Interface

■ PCI Express 3 .0 Interface

Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/

QCN9074 or 9024 WIFI 6 / 6E 11AX 4X4 Dual Band Selectable 5GHz or 6GHz miniPCIe WIFI MODULE :

Product Description - Testing samples available now !

DR9074E based on QCN90X4 Chipset is an enterprise high power wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. 

Features

■ Qualcomm Atheros QCN90X4

■ Maxim Tx power 20dBm per chain

■ Data Rateup to 4949Mbps

■ Support  5.180~5.825Ghz or 5.925GHz-7.125GHz or  5.180GHz- 7.125GHz

■ MiniPCIe connector

■ PCI Express 3.0 Interface

Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/

QCN9274 524 WIFI 7 11BE 2X2 WIFI Dual Band Dual Concurrent MODULE AVAILABLE NOW FOR orders and TESTING now!

524wifi Pro+ and Wallys tech is Introducing Qualcomm Dual Band concurrent 2x2 11be AP mode enabled radio moduleDream 9274-5G6G based on QCN9274 Chipset is an enterprise wireless module integrated with Dual Band 2x2 MU-MIMO Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

WIFI 7 802.11BE 2X2 MU-MIMO 5 + 6 GHZ DUAL BAND WIRELESS MODULE with Pro+ Industrial grade extended temperature range and better radio signal parameters

QCN9274 524 WIFI 7 11BE 4X4 WIFI MODULE AVAILABLE NOW FOR orders and TESTING now!

524wifi Pro+ and Wallys tech are Introducing Qualcomm’s 4x4 11be AP mode enabled radio module!DR9274-6G based on QCN9274 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO single Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

WIFI 7 802.11BE 4X4 MU-MIMO 6GHZ SINGLE BAND WIRELESS MODULE