Max. LAN Data Rate:1000Mbps

With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

Wi-Fi Supported Frequency: 2.4G & 5G

Wi-Fi Transmission Standard: 802.11ac

Wired Transfer Rate: 10/100/1000Mbps

2.4G Wi-Fi Transmission Rate: 300 Mbps

Encryption Type: WPA2-PSK

Products Status: New

Type: Wireless

LAN Ports: 4

WAN Ports: 1

Certification: CE,ROHS,FCC

Main Chip: MT7621+MT7612+MT7603

Flash/RAM: 16M Flash+512M RAM

Wireless standard: 802.11b/g/n/ac

Interface: 4 LAN(10/100/1000M) /1 WAN

Wireless speed: Up to 1200Mbps

Maximum power: 12W

other Interface: 1 SIM 1 SD 1 USB port

Frequency Range:2.4 GHz and 5.8 GHz

Antenna: removable 4*5dBi antenna

WE1026 is a dual band 3G/4G Wi-Fi router (3G / 4G gateway) specially for Vehicles using. LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06. It has1 LAN port, support 802.11 a/b/g/n/ac and 3G/4G. This device has Wide Area Network VPN tunnel, Local Area Network Wi-Fi security authentication, 4G/3G and watchdog functions etc, to achieve wireless LAN seamless connection, automatic network redial to provide users with high-speed, secure, reliable mobile broadband services.It has a USB 2.0 data interface, a MICRO SD (TF) card interface, with larger storage function.

This device with metal case and vehicle anti-interference design, to achieve excellent anti-interference performance. Also it uses vehicle power supply design, support 9V~28V Car power supply,can effectively prevent equipment damage from vehicle’s power fluctuations, it offers a wonderful solution for vehicle Wi-Fi such as bus Wi-Fi,car Wi-Fi, train Wi-Fi, taxi Wi-Fi etc. This device also widely used in Wi-Fi coverage project like Bus station, the Airport, Sea port etc. At the same time, it is also widely used in scenic where Wi-Fi coverage and other public places where Wi-Fi coverage of the Internet.

• Special for Vehicles using;
• Complies with 802.11b/g/n/a/ac. wireless protocol;
• Support dual band 2.4G and 5G wifi signal + support 3G/4G at the same time;
• LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06.
• Support 4G / 3G watchdog function, automatic network redial.
• Can be dialed through an external USB interface (need to mount USB 3G/4G Dongle )
• Support GPS function (depending on 3G/4G module)
• Support to automotive power 12V and 24V systems, the minimum operating voltage is 9V, the maximum operating voltage is 36V. The maximum can be withstand 174V duration 150ms surge voltage, meet to 5a, 5b standard of the car protection.

Z2101AX-D Gigabit Ports WIFI 6 Mesh ROUTER

WiFi 6 home router, which can access the Internet through WAN port, and then share the Internet through wireless WiFi 6 and 1000Mbps wired LAN.

Relevant standards and specifications:

• USB3.0/USB2.0 Bus Standard

• IEEE802.11n/g/b/a/ac/ax

• IEEE802.3/802.3u/802.ab

 Main features of the product

1).Support IEEE 802.11ax/ac/n/11b/g standard.

2).1*WAN+3*LAN 10/100/1000Mbps ports.

3).1* USB 3.0 data interface.

4).High speed 1800Mbps,dualband and gigabit ports.

5).Support MESH automatic networking.

• Chipset: Qualcomm Atheros QCN9074
• Antenna: 4 x IPEX connectors, 4T4R
• Form Factor: Mini PCIe
• Interface: PCIe
• Support: Linux (Open Source) , Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Linux 5.9 FW Download Path - amss.bin + board.bin + m3.bin ( /lib/firmware/ath11k/QCN9074/hw1.0/)

• Chipset: Qualcomm Atheros WCN6856
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN
• Supports Dual Band Dual Concurrent Design
• Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17.
• 802.11ax/ac/b/g/n tri-band WiFi 6 E miniPCIE module

WPEQ-262ACNI(BT)

WPEQ-261ACN(BT)

WPEA-251ACNI(BT)

GEPON OLT PON Module,Class C++, 7dBi, 20Km

WDS5441H-C(H)3AL is a high performance transceiver module for single fiber communications using a 1490nm continuous-mode transmitter and a 1310nm burst-mode receiver. It is designed to meet CTC 3.0 and IEEE802.3ah -2004 1000BASE- PX20+++ applications.
The transmitter has automatic power control (APC) function and temperature compensation circuitry to ensure stable optical power output and extinction ratio over all operating temperature range. The transmitter meets Class 1 eye safety per IEC825 and CDRH standards.
The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with LVPECL compatible differential outputs. It features a burst-mode Loss of signal (LOS) output which is LVTTL compatible. The receiver offers bust-mode RSSI outputs, which is I2C
accessible digitized data stored in the internal flash memory.
The module provides digital diagnostic information of its operating conditions and status, including transmitting power, laser bias current, module temperature, supply voltage, and burst-mode receiving power. Calibration and alarm/warning threshold data are written and stored in the internal memory (EEPROM). The memory map is compatible with SFF-8472.
Compatible with all Wodaplug OLT units and all other with this standard

Wodaplug.com WDS mini / micro optical Bare fiber PLC splitter 1 to 16 with default connector type SC / PC - mini packge with steel tube

   PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume (micro size but same or better technical values), the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.

WDS mini / micro optical Bare fiber PLC splitter 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,small plastic housing Splitters 100% compatible with all optical GE PON wodaplug networking products

FD504GW-D dual-mode ONU supports EPON/GPON/XPON three modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON/EPON/XPON adaptive access.

FD504GW-D have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. It fully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.

FD504GW-D integrates wireless function which meets 802.11 a/b/g/n/ac technical standards. At the same time, it also supports 2.4GHz/5GHz dual-band wireless signal. It has the characteristics of strong penetrating power and wide coverage. It can provide users with more efficient data transmission security.

xPON-ONU,one PON port,four Gigabit Ethernet ports,2.4G+5G 2x2MIMO WIFI,5dBi antenna,supply 12VDC Power,C41 plastic housing

Pizza-Box OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high  performance products.

FD1216S provides 4GE(copper) and 4GE optical interface, 2*10Gb uplink interface, and 16 EPON ports for downstream. It can support 1024 ONUs under 1:64 splitter ratio. 

PON Chipset Cortina CS8032 + Broadcom man chipset = super performance

FOR MORE INFO REFFER TO MANUAL OR DATASHEET !!

This device is Build to Order only - lead tiem is usually 3-4weeks. In stock we have 4 and 8 port OLTs .

• Version 2021 : Gain Improvement. OmniDirectional Antenna 4G 5G MIMO compatible with frequencies 698-960mhz and 1710-2700Mhz
• 700Mhz, 800Mhz, 900Mhz, 1800Mhz, 2100Mhz, 2600Mhz. Recommended for outdoor LTE 4G 5G use : THE SPEED OF YOUR NETWORK CONNECTION DEPENDS ON THE NUMBER OF USERS CONNECTED ON EACH FREQUENCY AND THE MOBILE OPERATOR'S NETWORK, or Indoor, pole or other support
• Gain 7-10dbi,  SMA male connector (MIMO), ideal for connecting to routers Huawei B525, B528 and B618 (with TS9-SMA adapter), B593, E5186, E5180 (with CRC9-SMA adapter), B310, B315, Asus, TP Link, Dlink, ZTE, Netgear and more
• Dimensions (cm) : 2000mm, water and wind resistant, Operates between -40° and +60° c
• Specialy tuned for LTE 4G 5G frequencies
• Cable lenght 2m (customisable 3m o 5m or 10m max)
• GE0006AA