524WiFi AW7916-AED Wi-Fi 6E AX3000 M.2 AW Key Module, powered by Mediatek MT7916AN chipset –  802.11ax 3000 G-band 2T2R and A-band 3T3R 2ss Dual Bands Dual Concurrent 

The AW7916-AED is a cutting-edge M.2 AW Key Module that supports Wi-Fi 6E 3000, DBDC and is based on Mediatek MT7916AN. CE certified !

The AW7916-AED Wi-Fi 6E AX3000 M.2 AW Key Module is like a turbocharger for your Wi-Fi setup. It supports the super-fast Wi-Fi 6E 3000 and can handle three bands at once and DBDC. It’s powered by the powerful Mediatek MT7916AN chipset, so you know it means business. With blazing-fast speeds of up to 3Gbps, this module takes your wireless connectivity to a whole new level. It’s got your back whether you’re on the 5GHz or 6GHz band with a whopping 160MHz of bandwidth, and it even handles the 2.4GHz band with 40MHz. Plus, there’s an extra antenna to make sure your download speeds are top-notch.

This module can handle up to 24 users thanks to features like OFDMA and MU-MIMO, and it’s got a bunch of other technical stuff like 512 MAC entries and 16 MBSSID. It’s got all the cool features from Wi-Fi 6 Release 2. And here’s the magic trick: it has a built-in Wi-Fi offload engine, which means it’s not only powerful but also energy-efficient. It’s like having a high-performance engine in a small package. Plus, it’s easy on your wallet, thanks to its integration with the Filogic 630 platform. If you’re looking for Tri-band Wi-Fi 6/6E solutions for routers and repeaters, you can even pair it up with the Filogic 830 SoC platform. In a nutshell, the AW7916-AED is like the superhero of M.2 AW Key Modules. It’s super fast, super efficient, and super beneficial for both device makers and users.

524 WiFi 6 2T2R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NPD2 Pro+ MMCX high power card

AW7915-NPD is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1×2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas MMCX RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

AW7915-NPD is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module

Works only with DR518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6102  5GHz, max 23dBm per chain, up to 2402Mbps  Single Band 5 GHz 2x2 WiFi 6E 802.11ax  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module

Works only with IPQ Dream 518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6122  6GHz, max 23dBm per chain, up to 2402Mbps  Single Band 6GHz 2x2 WiFi 6E (802.11ax)  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

QCN9274 524 WIFI 7 11BE 2X2 WIFI Dual Band Dual Concurrent MODULE AVAILABLE NOW FOR orders and TESTING now!

524wifi Pro+ and Wallys tech is Introducing Qualcomm Dual Band concurrent 2x2 11be AP mode enabled radio moduleDream 9274-5G6G based on QCN9274 Chipset is an enterprise wireless module integrated with Dual Band 2x2 MU-MIMO Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

WIFI 7 802.11BE 2X2 MU-MIMO 5 + 6 GHZ DUAL BAND WIRELESS MODULE with Pro+ Industrial grade extended temperature range and better radio signal parameters

QCN9274 524 WIFI 7 11BE 2X2 WIFI Dual Band Dual Concurrent MODULE

524wifi Pro+ and Wallys tech are Introducing Qualcomm Dual Band concurrent 2x2 11be AP mode enabled radio module!Dream 9274-DB based on QCN9274 Chipset is an enterprise wireless module integrated with Dual Band 2x2 MU-MIMO Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters, designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

This version is not available now, please use DR9274-5G6G for testing.

WIFI 7 802.11BE 2X2 MU-MIMO 2,4+ 5 GHZ DUAL BAND WIRELESS MODULE

QCN9274 524 WIFI 7 11BE 4X4 WIFI MODULE AVAILABLE NOW FOR orders and TESTING now!

524wifi Pro+ and Wallys tech are Introducing Qualcomm’s 4x4 11be AP mode enabled radio module!DR9274-6G based on QCN9274 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO single Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

WIFI 7 802.11BE 4X4 MU-MIMO 6GHZ SINGLE BAND WIRELESS MODULE 

Testing samples available now!

QCN 9024 WIFI 6 / 6E 11AX 4X4 m.2 Tri band selectable WIFI MODULE ( 2,4GHz or 5Ghzr or 6GHz triband support) :

Product Description

DR9074-Triband based on QCN9024  Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Features

■ Qualcomm Atheros QCN9024

■ Maxim 23 dBm per chain,up to 4949Mbps

■ Data Rateup to 4949Mbps

■ Support  Tri Band 2.4GHz&5GHz&6GHz 4x4 WiFi 6E (802.11ax)

■ 4 spatial streams (4SS)

■ M.2 E Key Interface

■ PCI Express 3 .0 Interface

Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/

QCN9274 WIFI 7 11BE 4X4 WIFI MODULE - Waikiki WiFi Module - available for order and testing now ! lead tiem is 2-3weeks only

Features

■ Qualcomm Atheros QCN9274 for Industrial Grade;

■Maxim Tx power 20dBm per chain;

■ 4x 4 5G MU-MIMO, up to 5765Mbps physical data rate;

■ Support up to 4096-QAM;

■ M.2 connector;

■ PCI Express 3 .0 Interface

■ Latest Linux version can support Ath12k driver

DR9274-5G based on QCN9274 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment.

QCN9074 or 9024 WIFI 6 / 6E 11AX 4X4 Dual Band Selectable 5GHz or 6GHz miniPCIe WIFI MODULE :

Product Description - Testing samples available now !

DR9074E based on QCN90X4 Chipset is an enterprise high power wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. 

Features

■ Qualcomm Atheros QCN90X4

■ Maxim Tx power 20dBm per chain

■ Data Rateup to 4949Mbps

■ Support  5.180~5.825Ghz or 5.925GHz-7.125GHz or  5.180GHz- 7.125GHz

■ MiniPCIe connector

■ PCI Express 3.0 Interface

Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/

WiFi pigtail cable RF MMCX / R to N female (2cm) 20cm, dia1.32 for miniPCIe WiFi cards and router boards with MMCX connectors.

524 WiFi AW7915-AE1 is a WiFi6 11ax 4T4R 2401Mbps M.2 AE key Module by MT7915. Dual Bands selectable is configurable.

524 WiFi AW7915-AED is a WiFi6 11ax 2T2R 1800Mbps M.2 Module AE Key by MTK MT7915DAN

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6BV

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 2×RP-SMA male connector with 3m cable

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13D

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization,
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 205×180×45mm
• 2×N Female connector
• IP55 rain and dust resistant

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 4×4 MIMO, 10 - 13 dBi, 4×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13BD

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization, 2*Vertical and 2*horizontal
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 250×250×25mm
• 4×N Female connector
• IP55 rain and dust resistant

5G WWAN Card To RJ45 Adapter With SIM SloT

Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

AW7915-BMD is a WiFi6 11ax 2T2R 1800Mbps M.2 Module BM Key by MTK MT7915DAN

AW7916-NPD is a WiFi6E 3000 highly advanced Mini PCIe Module with G-band 2T2R + A-band 3T3R 2ss Dual Bands Dual Concurrents (DBDC) based on Mediatek MT7916AN and MT7976 chip.

The capabilities enabling up to 3Gbps performance, supports 3×3 with 2 Spatial Streams for either 5 or 6GHz at maximum 160MHz bandwidth and 2×2 with 2 spatial streams for 2.4GHz at maximum 40MHz bandwidth. The additional 3rd antenna can be used for zero-wait DFS and/or MRC (up to 1024-QAM) for extra downlink (Rx) performance. Integrating the FEM radio into the Mediatek Filogic 630 platform yields integration advantages of smaller size and lower BOM costs for device makers.

Advanced access point features include up to 24 users (OFDMA), support of MU-MIMO clients, 512 MAC entries, 16 MBSSID and support for all Wi-Fi Alliance Wi-Fi 6 Release 2 features.

In addition, the chipset includes hardware-based Wi-Fi offload engine to alleviate the router AP from Wi-Fi connection-related processing, improving whole platform energy efficiency and performance. Filogic 630 can also be combined with Filogic 830 SoC platform for Tri-band Wi-Fi 6/6E solutions for Routers and Repeaters.

In stock, ready for shipment now! CED, FCC certified !

524 WiFi6 2T2R Dual Bands Dual Concurrent mini PCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 + MT7975 - Dream DR7915 NPD WiFi module, Pro+  - SALE !

DR7915 is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1x2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

DR7915 is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

GT5G-CV M.2 NGFF TO Type-C USB 3.0 dongle - total New design for latest 5Gnr M.2 Modems  

Key Features
Compatibility is strong - Compatible with most M.2 interface 5G modules
Industrial - Industrial grade material design
USB Type-C 3.0 - USB Type-C 3.0 high speed interface

Compatible with most M.2 interface 5G modules
Special shield cover protection design to protect key devices from external force damage, corrosion aging
Nano SIM Card slot
No driver required, plug and play
Led indicators let you know your connection status immediately

USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

• Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
• Introduce integrated aluminum heat sink，make your 5G modem always cool.
• Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
• 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
• Adjust output to 3.7V. Prevent voltage drop when high data transfer .
• Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
• Use Nano SIM card slot , support hot swap simcard.
• ESD prtection at USB and SIM slot.
• Better performance, because of fast thermal module

WiFi 5 wave2 4T4R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7615NP1, DBDC 

Chipset: MTK MT7615N

Interface: Normal Gold Finger miniPCIE

AW7615-NP1 is a 11ac WiFi Mini PCIe standard full-size Module based on Mediatek MT7615 which supports 1.7 Gbps PHY rate and Dual Bands Dual Concurrents (DBDC).

It fully complies with IEEE802.11ac and IEEE802.11 a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7615 is designed to support standard based features in the areas of security,quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7615 supports concurrent dual-band operation at 5GHz and 2.4GHz band (DBDC, Dual-Band-Dual-Concurrent).

With the advent of 802.11ac, multi-user MIMO (MU-MIMO) is defined. MT7615 supports MU-MIMO with different configurations. An AP is able to use its antenna arrays to transmit multiple frames to different clients at the same time and over the same frequency spectrum.

Sierra Wireless 5G Module

* 5G Category: 5G NR Sub-6
* 5G DL 4.5Gbps, UL 660Mbps
* Satellite Systems: Galileo, Glonass, GPS, Beidou (Bands: L1 and L5)
* Firmware: Secure boot, Pre-certified firmware
* Dual SIM single standby (DSSS) switches

The AirPrime® EM9190 M.2 from Sierra Wireless is an Embedded 5G NR and LTE Cat-22 Module that supports Sub-6 GHz and mm-Wave bands. This device is a part of the Sierra EM Series that offers global 5G connectivity. It delivers up to 5.5 Gbps of downlink speed and up to 330 Mbps of uplink speed.

The EM9190 device is available in a 30 x 52 x 2.38 mm footprint. With automatic 4G and 3G fallback networks, and a built-in GNSS receiver, it can be used for a wide range of M2M and IoT applications such as industrial routers, home gateways, industrial and consumer laptops, rugged tablet PCs, video surveillance and digital signage.

CHIPSET - Qualcomm SDX55 , M.2 form factor

Available for orders - leadtime is one - two weeks, em9190 are all like new in perfect working conditoon, has a few scratches on surface, tested & upgrade to latest fw.