Quectel 5G NR RM530N-GL Glomal m.2 module, 4x4 MIMO DL, Cat16, IoT/eMBB-Optimized 5G Sub-6 GHz and mmWAVE

5G WWAN Card To RJ45 Adapter With SIM SloT

Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

Quectel 5G RM520N-GL Glomal m.2 module, 4x4 MIMO DL, Cat16, IoT/eMBB-Optimized 5G Sub-6 GHz

USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

• Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
• Introduce integrated aluminum heat sink，make your 5G modem always cool.
• Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
• 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
• Adjust output to 3.7V. Prevent voltage drop when high data transfer .
• Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
• Use Nano SIM card slot , support hot swap simcard.
• ESD prtection at USB and SIM slot.
• Better performance, because of fast thermal module

Quectel RM505Q-AE is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel-15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM505Q-AE is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 modules EM12-G/EM120R-GL/EM121R-GL, and Cat 16 module EM160RGL, which facilitates customers’ migration from LTE-A to 5G.

Led time is 2-3weeks now

• - 5G sub-6GHz module
• - 52.0mm × 30.0mm × 2.3mm
• - 8.7g
• - M.2 form factor
• - Max. downlink 2.5Gbps / 650Mbps uplink
• - Extended temperature range of -40°C to +85°C

The RM502Q-AE is a 5G sub-6GHz M.2 module measuring 52.0mm × 30.0mm × 2.3mm which supports both standalone (SA) and non-standalone (NSA) modes, as well as LTE Cat 20. The module achieves maximum downlink rates of 2Gbps and uplink rates of 450Mbps under SA mode and maximum downlink rates of 5Gbps and uplink rates of 650Mbps under NSA mode. The RM502Q-AE is intended to meet the demand for high speed, eMBB, and low latency of customers anywhere in the world outside China. The module supports multiple-input multiple-output (MIMO) technology which greatly reduces errors and optimizes data speed, and optionally features integrated GNSS (GPS/GLONASS/BeiDou/Galileo) for rapid and precise positioning. It is suitable for a wide range of applications including industrial routers, industrial PDAs, rugged tablet PCs and digital signage.

Version is RM502QAEAA-M20-SGASA   - USB is turned on by default 

- To run this module in our H721 router you need to switch modem data_interface to USB mode,  

* Chipset: Qualcomm Snapdragon X55 5G modem

* Cover global 5G frequency bands - Global version expect China , recommended for Europe, US and Canada

* Multi-gigabit data rates, up to 5.0Gbps

* DL 4 × 4 MIMO for 5G NR and LTE-A bands

* Multi-constellation GNSS capabilities

* Abundant interfaces: USB 3.0/3.1, PCIe 3.0 and eSIM

5G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA - Global version expect China , recommended for Europe, US and Canada

Quectel RM510Q-AE is a 5G module that is specially optimized for IoT/eMBB applications. Adopting 3GPP Release 15, it supports both 5G NSA and SA modes. Designed in M.2 form factor, RM510Q-GL can be easily embedded in customers’ applications.

Wodaplug H721 5G routers can support this brand new modules !

Full part no : RM510QGLHA-M20-SGASA

The RM502Q-AE is a 5G sub-6GHz M.2 module measuring 52.0mm × 30.0mm × 2.3mm which supports both standalone (SA) and non-standalone (NSA) modes, as well as LTE Cat 20. The module achieves maximum downlink rates of 2Gbps and uplink rates of 450Mbps under SA mode and maximum downlink rates of 5Gbps and uplink rates of 650Mbps under NSA mode. The RM502Q-AE is intended to meet the demand for high speed, eMBB, and low latency of customers anywhere in the world outside China. The module supports multiple-input multiple-output (MIMO) technology which greatly reduces errors and optimizes data speed, and optionally features integrated GNSS (GPS/GLONASS/BeiDou/Galileo) for rapid and precise positioning. It is suitable for a wide range of applications including industrial routers, industrial PDAs, rugged tablet PCs and digital signage.

To run this module in our H721 router you need to switch modem data_interface to USB mode,  

The version is RM502QAEAA-M20-SGASA  - USB is turned on by default

- Global version expect China , recommended for Europe, US and Canada

M.2 B Key specialy modified for 5G modules PIN to Mini PCI-E Adapter Converter Card with SIM Card Slot for Sierra Wireless, Quectel, Telit or SIMCom modems  by wodaplug.com which is compex & wodaplug LTE boards compatible with sierra wireless, Quectel, SIMCom or other modems (modules). Module size 3050 524wifi.com

Please see PIN chart diagram picture to check, if its compatible with your 5G module