Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

DR882-NAS 28dBm - 5GHz High Power 2×2 MIMO 802.11ac Wave 1 QCA9882 Module

802.11ac 2.4 / 5GHz miniPCIe 3*3 MIMO Radio module designed for Enterprise Wireless Dual Band Access Points and High Speed data transmition!

Cheaper version, not with Pro+ technology.

Need sampel first ? No problem, please contact us at  info at 524wifi.com ! Available now in stock!

Dual Band 3×3 MIMO 802.11ac Wave 1 Module

• Qualcomm-Atheros QCA9880 chipset

  2.4GHz max 24dBm & 5GHz max 25dBm output power  

  IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n  

  3x3 MIMO Technology, up to 1.3Gbps 

  Mini PCI Express edge connector  

  Support the Frequency 4920MHz~4980MHz

  RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals  

  Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check

  (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

  Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards

  Supports Dynamic Frequency Selection (DFS) 

• YOUTUBE Viideo about this modules

802.11ac 2.4 / 5GHz miniPCIe 2*2 MIMO Radio module designed for Enterprise Wireless Dual Band Access Points and High Speed data transmition!

Need sampel first ? No problem, please contact us at  info at 524wifi.com ! Available now !

Dual Band 2×2 MIMO 802.11ac Wave 1 Module, Cheaper version, not with Pro+ technology.

• Qualcomm-Atheros QCA9882 chipset

  2.4GHz max 24dBm & 5GHz max 23dBm output power  

  IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n  

  2x2 MIMO Technology, up to 867Mbps  

  Mini PCI Express edge connector  

  Support the Frequency 4920MHz~4980MHz

  RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals  

  Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check

  (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

  Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards

  Supports Dynamic Frequency Selection (DFS) 

• YOUTUBE Viideo about thsi modules

Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)

Features:

Support 802.3AT/AT 

The output voltage is 24V

The efficiency is 85% 

Support surge protection 

Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals

Product Description : PD-25 is a 802.3at module，that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports

Samples are available now! OpenWiFi and OpenWRT firmware supported.

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

QCN9074 / QCN6024 WIFI 6 11AX 4X4 WIFI DUAL BNAD Pro+ MODULE - selectable 2,4 ot 5GHZ:

DR9074E-DB based on QCN9074 or QCN6024  Chipset is an enterprise wireless module integrated with 4x4 or 2x2 MU-MIMO Dual Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters  designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. 

Features

■ Qualcomm Atheros QCN9074 or QCN6024

■ Maxim Tx power 20dBm per chain

■ Data Rateup to 4949Mbps

■ Support  2.412GHz-2.472GHz & 5.18GHz-5.825GHz

■ MiniPCIe connector

■ PCI Express 3.0 Interface

Applications

■ Security Surveillance

■ Commercial radio coverage

■ Hotel Wireless application

■ Forest fire protection engineering

■ Country coverage

■ Some special scene application

Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !

Description

• DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).

  Learn More

Features

Support 4pcs Mini PCIE cards or 4 pcs M.2 cards , can support DR9074 QCN 9074 / 9072 modules

RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals  

Product Description

4G41 is an adapter card with four MiniPCIe and four M.2 slots. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest miniPCIe and m.2 interface cards. Comes with regular profile bracket. 

Bracket include holes for mounting SMA connectors, or for using as cable exist holes.

Available for orders

MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

Description

DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

Onmi Antenna 

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt