C-DATA EOC Indoor Slave with WiFi router with wifi speed 300Mbps - CD5204W-B65S-R410, 300Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

Description

CD5204W-B65S-R410 EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Two WiFi antennas -  802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.

Wodaplug EOC Indoor Slave with WiFi router with wifi speed 300Mbps - EOC1121R4WL-R410, 600Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

Description

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Two WiFi antennas -  802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.

Wodaplug EOC Indoor Master - dual port, EOC1222L, 600Mbps, 2*LAN, 2+2*F, WEB Management, max 256 slaves, VLAN, IGMP, QoS ...
Description
The indoor type EOC master is usual placed in cabinet or corridor, basement or patio. Wodaplug Indoor type EOC master products adopt metal shell, built-in power supply, satisfy the corridor environment requirements, and has the anti lightning, antidust, good heat dissipation characteristics.

Pizza-Box OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.

The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high  performance products.

FD1216S provides 4GE(copper) and 4GE optical interface, 2*10Gb uplink interface, and 16 EPON ports for downstream. It can support 1024 ONUs under 1:64 splitter ratio. 

PON Chipset Cortina CS8032 + Broadcom man chipset = super performance

FOR MORE INFO REFFER TO MANUAL OR DATASHEET !!

This device is Build to Order only - lead tiem is usually 3-4weeks. In stock we have 4 and 8 port OLTs .

Wodaplug.com WDS mini / micro optical Bare fiber PLC splitter 1 to 16 with default connector type SC / PC - mini packge with steel tube

   PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume (micro size but same or better technical values), the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.

WDS mini / micro optical Bare fiber PLC splitter 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,small plastic housing Splitters 100% compatible with all optical GE PON wodaplug networking products

Broadband Amplifier DA 181

Construction of data passing thru broadband amplifier DA181 is a result of our many years of experience in developing and producing components for TV cable distributions and technicians requirements engaged in professional installations of coaxial networks.
The amplifier has excellent linearity and adaptation, large overload possibility and low noise. This allows operation in difficult conditions with large differences in levels between the signals or in CATVs with a large number of transmitted channels.
Amplifier gain is slightly increasing towards higher frequencies to compensate for the natural attenuation of passive components involved in splittings.

GEPON OLT PON Module,Class C++, 7dBi, 20Km

WDS5441H-C(H)3AL is a high performance transceiver module for single fiber communications using a 1490nm continuous-mode transmitter and a 1310nm burst-mode receiver. It is designed to meet CTC 3.0 and IEEE802.3ah -2004 1000BASE- PX20+++ applications.
The transmitter has automatic power control (APC) function and temperature compensation circuitry to ensure stable optical power output and extinction ratio over all operating temperature range. The transmitter meets Class 1 eye safety per IEC825 and CDRH standards.
The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with LVPECL compatible differential outputs. It features a burst-mode Loss of signal (LOS) output which is LVTTL compatible. The receiver offers bust-mode RSSI outputs, which is I2C
accessible digitized data stored in the internal flash memory.
The module provides digital diagnostic information of its operating conditions and status, including transmitting power, laser bias current, module temperature, supply voltage, and burst-mode receiving power. Calibration and alarm/warning threshold data are written and stored in the internal memory (EEPROM). The memory map is compatible with SFF-8472.
Compatible with all Wodaplug OLT units and all other with this standard

FD504GW-D dual-mode ONU supports EPON/GPON/XPON three modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON/EPON/XPON adaptive access.

FD504GW-D have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. It fully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.

FD504GW-D integrates wireless function which meets 802.11 a/b/g/n/ac technical standards. At the same time, it also supports 2.4GHz/5GHz dual-band wireless signal. It has the characteristics of strong penetrating power and wide coverage. It can provide users with more efficient data transmission security.

xPON-ONU,one PON port,four Gigabit Ethernet ports,2.4G+5G 2x2MIMO WIFI,5dBi antenna,supply 12VDC Power,C41 plastic housing