Search results for 'Quectel'
-
Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
$149.00Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67
DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
Planar Antenna
■ 2 x 2 MIMO 5G Antenna
■ 5G: 16dbi
Available for orders, lead time is 2-3 weeks.
Learn More -
Wallys DR-AP4029 Indoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 + 5GHZ omni 4 / 6dBi antennas
$125.00MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi
Description
DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
Onmi Antenna
■ 2 x 2.4G&5G Antenna
■ PCB Antenna
■ 2.4G: 4dbi ;5G: 6dbi
Enclosure
■ Dimension: 220x 220 x 42.54mm
■ UV Protected and Durable ABS Radome
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
-
MAXLINK 5+ internal triband 5dBi omnidirectional WiFi Antenna 2,4 - 5,8GHz, rSMA
$12.90internal triband 5dBi omnidirectional dipol WiFi Antenna 2,4 + 5GHZ, rSMA Learn More -
Wodaplug ® FD504GW-DX R411 xPON EPON / GPON ONU unit Built-in dual band WiFi 11ac, 2.4 + 5GHz, 2x2 MIMO, 5dBi antennas
$59.90FD504GW-D dual-mode ONU supports EPON/GPON/XPON three modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON/EPON/XPON adaptive access.
FD504GW-D have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. It fully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.
FD504GW-D integrates wireless function which meets 802.11 a/b/g/n/ac technical standards. At the same time, it also supports 2.4GHz/5GHz dual-band wireless signal. It has the characteristics of strong penetrating power and wide coverage. It can provide users with more efficient data transmission security.
xPON-ONU,one PON port,four Gigabit Ethernet ports,2.4G+5G 2x2MIMO WIFI,5dBi antenna,supply 12VDC Power,C41 plastic housing
MAIN FEATURES
- In compliant with3ah and ITU – T G.984 standard
- Support ONU auto-discovery/Link detection/remote upgrade of software
- Meet 11 a/b/g/n/ac WIFI technicalstandard
- Support VLAN transparent, tag configuration
- Support multicast function
- Support DHCP/Static/PPPOE internet mode
- Support port-binding
- Support OAM/OMCI+TR069 remote management
-
SALE - WPJ428 Multi-function IPQ4028 Embedded Board, 710MHz CPU / 2x GE Port / Dual Band 802.11ac Wave 2, LTE Gateway
$99.90WPJ428HV - 2.4GHz & 5GHz 2×2 802.11ac Wave 2 MU-MIMO Wireless Embedded Board with M.2 Slot
- Next Gen IPQ4028 ARM v7 CPU, 710MHz CPU
- On-board Dual Band 2×2 802.11ac Wave 2 300Mbps @ 802.11n + 867Mbps @ 802.11ac
- 802.11ac Wave 2
- Integrated IEEE 802.3af/at
- Support 2 x Gigabit Ethernet Port
- 1x NGFF (M.2) Slot
- 802.11ac Wave 2 LTE Gateway - WPJ428 board only provide M2 slot for 3G/4G module, LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
- samples available ! for compatible LTE modules check our LTE modules category !
- Can support Quectel EM12-G 4G LTE module now !!! Same as EC25, EP06 or EM7455 modules
-
QCA 9984 WLE1216V5-20 5GHz 4×4 MU-MIMO 802.11ac Wave 2 80+80MHz Module, single band, 20dBm, COMPEX
$95.00COMPEX WLE1216V5-20 MU-MIMO 4 X 4 802.11ac miniPCIe Wawe2 Radio module, QCA 9984 chip, 5GHz, single band, 20dBm
Model: WLE1216V5-20 - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0 Standard form factor
Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead
The WLE1216V5-20 is a IEEE 802.11ac wireless adapter that operates in 5GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset( "Cascade" series), the WLE1216V5-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11ac technology, WLE1216V5-23 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise aplications.The WLE1216V5-20 is backward compatible with 802.11a/n and fully supports industry standards compliant security.
Max connected clients for wle1216V5-20 in wpq864 is about 500users. (class B, C Network) !!!
Wave 2 Board Data :
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)
Learn More -
Quectel EC25 miniPCIe - optimized LTE Cat 4 Module EC25-E EUROPE EMEA version
$42.00
Special Price $39.00
EC25-E FA PCIE - LTE FDD: B1/B3/B5/B7/B8/B20
LTE TDD: B38/B40/B41
WCDMA: B1/B5/B8
GSM: B3/B8LTE Version 3GPP E-UTRA Release 11
Quectel EC25 is a series of LTE category 4 module optimized
Learn More
specially for M2M and IoT applications. Adopting the 3GPP
Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
50Mbit/s uplink data rates. Designed in the compact and unified
form factor, EC25 is compatible with Quectel UMTS/
HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
which allows for flexible migration among them in design
and manufacturing.
EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
AU, EC25-AUT and EC25-E. This makes it backwardcompatible
with existing EDGE and GSM/GPRS networks,
ensuring that it can be connected even in remote areas devoid
of 4G or 3G coverage.
EC25 supports Qualcomm® IZat™ location technology Gen8C
Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
GNSS greatly simplifies product design, and provides
quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces
and abundant functionalities (USB drivers for Windows XP,
Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
Linux, Android/eCall*) extend the applicability of the module to
a wide range of M2M and IoT applications such as industrial
router, industrial PDA, rugged tablet PC, video surveillance,
and digital signage. -
Wodaplug ® mini pacakge optical PLC splitter 1 to 16 - with connector type SC/PC
$14.00Wodaplug.com WDS mini / micro optical Bare fiber PLC splitter 1 to 16 with default connector type SC / PC - mini packge with steel tube
PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume (micro size but same or better technical values), the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.
WDS mini / micro optical Bare fiber PLC splitter 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,small plastic housing Splitters 100% compatible with all optical GE PON wodaplug networking products
Learn More -
Quectel EC25 miniPCIe - optimized LTE Cat 4 Module ver EC25-A North America
$51.99EOL - please use newer EC25-AF version
EC25-A: LTE FDD: B2/B4/B12 WCDMA: B2/B4/B5
LTE Version 3GPP E-UTRA
Release 11 Bandwidth: 1.4/3/5/10/15/20MHz
Typ. 3GPP TS27.007 and Enhanced AT Commands
Quectel EC25 is a series of LTE category 4 module optimized
Learn More
specially for M2M and IoT applications. Adopting the 3GPP
Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
50Mbit/s uplink data rates. Designed in the compact and unified
form factor, EC25 is compatible with Quectel UMTS/
HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
which allows for flexible migration among them in design
and manufacturing.
EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
AU, EC25-AUT and EC25-E. This makes it backwardcompatible
with existing EDGE and GSM/GPRS networks,
ensuring that it can be connected even in remote areas devoid
of 4G or 3G coverage.
EC25 supports Qualcomm® IZat™ location technology Gen8C
Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
GNSS greatly simplifies product design, and provides
quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces
and abundant functionalities (USB drivers for Windows XP,
Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
Linux, Android/eCall*) extend the applicability of the module to
a wide range of M2M and IoT applications such as industrial
router, industrial PDA, rugged tablet PC, video surveillance,
and digital signage. -
Quectel EP06 miniPCIe - optimized LTE Cat 6 Module ver EP06-E version for EU, AU, BR , LTE-A (5G GSM) ready
$59.90 As low as: $54.00Variant for EMEA/Australia/Brazil : EP06-ELA-512-SGA
LTE-A ready !! EP06-E PCIE has stop production as old version. But we still have 350pcs EP06-E PCIE in stock now !!
LTE FDD: B1/B3/B5/B7/B8/B20/B28
LTE TDD: B38/B40/B41
2×CA: B1+B1/B5/B8/B20/B28;
B3+B3/B5/B7/B8/B20/B28;
B7+B5/B7/B8/B20/B28;
B38+B38; B40+B40; B41+B41
WCDMA: B1/B3/B5/B8Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)LTE-A Cat.6 module with Mini PCIe form factor, optimized for
Learn More
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems -
Quectel EP06 miniPCIe - optimized LTE Cat 6 Module ver EP06-A (America), LTE-A ready
$59.90Variant for America : EP06-A
LTE-A CAT6 support ! END OF LIFE, SALE PRICE FOR LAST ONE MODULE. We recommend to use EM060K-GL module with adapter to miniPCIE - we can deliver it assembled for the same price.
LTE FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/
B29/B30/B66
LTE TDD: B41
2×CA: B2+B2/B5/B12/B13/B17/B26/B29;
B4+B4/B5/B12/B13/B17/B26/B29;
B25+B5/B12/B13/B17/B25/B26/B29;
B30+B5/B12/B17/B26/B29; B41+B41
(Note: B29 is only for secondary
component carrier)
WCDMA: B2/B4/B5Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systemsNotice for SPRINT users : sprint is very special, currently, only sierra wireless LTE modem support it well. Quectel EP06A updated the new datasheet , they delete the band41 from it's support list, so EP06 not support sprint fully.
Learn More -
QCA9984 WLE1216V2-20 2,4GHz 4×4 MU-MIMO 802.11n miniPCIe Module, single band, 20dBm, COMPEX
$95.00COMPEX WLE1216V2-20 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe WiFi MODULE - MOQ 20pcs, lead time 2 weeks
Model: WLE1216V2-20-CUS239-4A-TE - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0
Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead.
The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.Product Highlights
- Qualcomm Atheros ‘Cascade’ QCA9984
- 2.4GHz max 20dBm output power (per chain)
- Heat sink allows free air operation
- IEEE 802.11b/g/n compliant, up to 800Mbps
- Multi-user MIMO (MU-MIMO) beamformer
- Mini PCI Express 2.0 interface
- Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
- Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
- Supports Dynamic Frequency Selection (DFS)
- Designed for High Bandwidth Enterprise Wireless Access Points
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Learn More
Can work with Ath10driver well :-) -
Wodaplug ® LTE router Multi-function QCA9531,E micro Board mini router metal case, 2x LAN /3G/UMTS/4G/5G/LTE gateway, PPPOE, dhcp-4G, M2M, miniPCIe, H5312
$49.00This device is EOL - last two units in stock !! Please use WG1608 routers instead.Complete LTE plug & play complete solution, ready for Quectel EM12-G, EM06 / EP06 / EC 25 - XXX lte module, lte module not included in (pleas epurchase based on your region), supported in Openwrt or SDK compil.M2M module & miniPCIe slots for 4G LTE modules, WiFi radio on board - for setup guide either SDK or OpenWRT/LEDE download rar fileEC25-V Verizon module tested supported with LEDE firmwarenew Lede / OpenWRT software support more function than SDK:support IPv6support one LTE module in miniPCIe or M.2 slotsupport VPN functionsupport control band width and use Qos !we use Qualocmm AP147 as reference designsupport wide range volt from 9v~40V poe or power plugSupport hardware and software WDTSIM/UIM port: 15KV ESD protection;Support low-consumption mode, including sleep mode, scheduled online/offline mode,scheduled power-on/power-off mode(optional)Support standard WAN port and PPPOE protocol that can connect to ADSL directlyConvenient configuration and maintenancesupport firmware update locally or remotely (LAN, WiFi and OTA WAN) Learn More -
EM7455 AirPrime Sierra wireless Module M.2, LTE-A CAT 6, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, CDMA, GNSS
$39.90Ideal for industrial M2M and mobile computing solutions, the AirPrime ® EM7455 DE5811E embedded module delivers high speed connectivity, with a wide selection of advanced air interfaces, including LTE Advanced with carrier aggregation. The EM7455 support LTE bands targeted at the North America and EMEA regions. Based on the PCI Express M.2 standard with USB 3.0 and USB 2.0 interfaces, the EM7455 module offers an easy upgrade path to new network technologies and global access to high speed networks.
It provides LTE-FDD, LTE-TDD, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, and GNSS connectivity for networking, and M2M applications over several radio frequency bands LTE: B1, B2, B3, B4, B5, B7, B12, B13, B20, B25, B26, B29, B30, B41 & HSPA+, UMTS: B1, B2, B3, B4, B5, B8 and supports 3G roaming, GPS: GPS, Glonass, Beidou, Galileo, Cariers officially supported: AT&T, Bell, Rogers, Sprint, Telus, US Cellular, Verizon, Vodafone ( please always check actual list as providers are continuously added ) Learn More -
5G NR 4G Dual SIM dual-Q modules ROUTER LTE-A MTK7621 4xLAN 1xWAN 12x antena 1xM.2 USB3 3xMiniPCIe H721 V5G 11ac WiFi metal case
$129.00Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware) - this version is EOL, please use version 7 now !
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G now includes:
- 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
- 4 x WiFi Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
- Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files