Currency:

Search results for 'Wodaplug'

Relevance
Set Ascending Direction

Grid List

5 per page

Items 16 to 20 of 84 total

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Qualcomm SDX55 Sierra Wireless EM9190 5G NR Sub-6 GHz and mmWave Module

    $399.00

    The AirPrime® EM9190 M.2 from Sierra Wireless is an Embedded 5G NR and LTE Cat-22 Module that supports Sub-6 GHz and mm-Wave bands. This device is a part of the Sierra EM Series that offers global 5G connectivity. It delivers up to 5.5 Gbps of downlink speed and up to 330 Mbps of uplink speed.

    The EM9190 device is available in a 30 x 52 x 2.38 mm footprint. With automatic 4G and 3G fallback networks, and a built-in GNSS receiver, it can be used for a wide range of M2M and IoT applications such as industrial routers, home gateways, industrial and consumer laptops, rugged tablet PCs, video surveillance and digital signage.

    CHIPSET - Qualcomm SDX55 , M.2 form factor

    Available for orders - leadtime is one - two weeks, em9190 are all like new in perfect working conditoon, has a few scratches on surface, tested & upgrade to latest fw.

    Learn More
  2. Qualcomm SDX55 Telit FN980 LTE Advanced 5G Data Card

    $529.00

    Telit FN980 5G wireless module Specifications:

    Telit 5G Module

    * Chipset: Qualcomm Snapdragon X55 5G

    * 5G Sub-6 and mm Wave FDD and TDD, SA & NSA operations

    * 5G core network Opt. 3a/3x and Opt. 2

    * 4G: 7CA, up to 20 layers DL / 3CA UL,256 QAM DL/UL

    * 3G: HSPA+ Rel. 8 (DL/UL 42/11 Mbps)

    * Data Rates:

    - 5G up to 5.5 Gbps DL/2.7 UL Gbps
    - 4G up to 2.4 Gbps DL/211 Mbps UL
    - 3G up to 42 DL/11 UL Mbps

    * GNSS: gpsOne Gen9 L1 band on dedicated RF connector, L5 shared with cellular

    * Voice support: VoLTE, VoNR (under evaluation), PCM audio over USB

    * 4 antenna connectors for LTE/Sub-6

    * 5G FR1 Bands: n1, n2, n3, n5, n7, n12, n14, n20, n28, n30, n41, n66, n71, n77, n78, n79

    * 5G FR2 Bands: n257, n258, n260, 261

    * LTE Bands: 1, 2, 3, 4, 5, 8, 9, 12, 13, 14, 17, 18, 19, 20, 26, 28, 71, 25, 66, 39, 29 (DL), 30, 32, 7, 38, 40, 41, 42, 43, 46 (LAA), 48(CBRS), 34, 27

    * WCDMA Bands: 5, 8, 3, 4, 2, 1, 9, 19

    * 5G 4x4 MIMO support on bands n1, n2, n7, n66, n3, n77, n78, n79, n41 and n30

    * 4G 4x4 MIMO support on bands 32, 4, 66, 3, 2, 25, 1, 30, 40, 41, 7, 43, 42, 46, 48

    * Interfaces
    - 1.8/3 V SIM Interface
    - USB 3.1 gen2 and 2.0
    - PCIe gen3
    - Drivers support: Windows 10, Linux

    * Chipset: Qualcomm® Snapdragon™ X55

    * Electrical & Sensitivity
    - LTE/5G sub 6 Output power: -23 dBm (power class 3)
    - Supply voltage: - Nominal: 3.3 VDC

    * Antenna types: 4x LTE/Sub-6 + 4x QTM525/527

    * FOTA Support

    * Operating temperature range: -40°C to +85°C

    * Dimensions: 30 x 50 x 3.5mm

    * Approvals
    - RED (planned)
    - GCF (planned)
    - Others (under evaluation)

    Learn More

    Out of stock

  3. Quectel RM510Q-GL 5G Sub-6 GHz & mmWave M.2 LTE Module

    $299.00

    Quectel RM510Q-AE is a 5G module that is specially optimized for IoT/eMBB applications. Adopting 3GPP Release 15, it supports both 5G NSA and SA modes. Designed in M.2 form factor, RM510Q-GL can be easily embedded in customers’ applications.

    Wodaplug H721 5G routers can support this brand new modules !

    Full part no : RM510QGLHA-M20-SGASA

    Learn More
  4. 5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE

    From: $155.50

    To: $2,715.46

    Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

    New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  5. Wodaplug EOC 2-87MHz data passing thru Diplex filter DD8711f 3*F connectors, data / TV (DVB-T2) + SAT

    $10.00

    INDOOR DIPLEX FILTER DD 8711f


    to split DATA and SAT+TV signal on the beginning of coax network and to divide SAT+TV and DATA signal before end TV (very low loss -1dB and very high signal separation)
    or to realise BY PASS of an existing aplifier in your coax network.
    This solution is designed for TV / DVB-T2 cabling network with SATELITE signal coexistence
    high quality housing with 3* F connectors
    high isolation
    low price

    Learn More
Relevance
Set Ascending Direction

Grid List

5 per page

Items 16 to 20 of 84 total

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6