Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Dual-core ARM 64bit A53@1.0GHz Processor

1G DDRL3L System Memory

8MB NOR Flash, 256MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

M.2 Card Slot for QCN9074 WIFI 6E Card

M.2 Card Slot for QCN6122-6E Card

M.2 Card Slot for QCN6102-5GCard

Support Openwifi

DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card. 

Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721O 5G NR outdoor version now includes:

• outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

Hardware: 

MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

1x M.2 b.key USB 3.0 as 5Gnr interface,

1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

Lightning protection design

 Heat sink at botoon of 5Gnr modem

NEW X-WRT firmware available !!!

Quectel 5G NR RM530N-GL Glomal m.2 module, 4x4 MIMO DL, Cat16, IoT/eMBB-Optimized 5G Sub-6 GHz and mmWAVE

QCN9074 or 9024 WIFI 6 / 6E 11AX 4X4 Dual Band Selectable 5GHz or 6GHz miniPCIe WIFI MODULE :

Product Description - Testing samples available now !

DR9074E based on QCN90X4 Chipset is an enterprise high power wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. 

Features

■ Qualcomm Atheros QCN90X4

■ Maxim Tx power 20dBm per chain

■ Data Rateup to 4949Mbps

■ Support  5.180~5.825Ghz or 5.925GHz-7.125GHz or  5.180GHz- 7.125GHz

■ MiniPCIe connector

■ PCI Express 3.0 Interface

Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/