Currency:

Search results for 'Wodaplug'

Relevance
Set Ascending Direction

Grid List

15 per page

9 Item(s)

  1. Quectel RM510Q-GL 5G Sub-6 GHz & mmWave M.2 LTE Module

    $299.00

    Quectel RM510Q-AE is a 5G module that is specially optimized for IoT/eMBB applications. Adopting 3GPP Release 15, it supports both 5G NSA and SA modes. Designed in M.2 form factor, RM510Q-GL can be easily embedded in customers’ applications.

    Wodaplug H721 5G routers can support this brand new modules !

    Full part no : RM510QGLHA-M20-SGASA

    Learn More
  2. 5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE

    From: $155.50

    To: $2,721.46

    Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

    New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  3. EM06-A EM06ALA-512-SGAD Quectel LTE-A M.2 - optimized 3GPP Rel. 11 LTE 2xCA Cat 6 Module , 5G+ ready, version North America

    $66.00

    LTE-A EM06 - A (North America version) - END OF LIFE - out of production, please use EM060K Global module instead

    Quectel EM06 is a series of LTE Advanced category 6 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 11 LTE technology, it delivers maximum data rates up to 300Mbps downlink and 50Mbps uplink.
    This version will be EOL soon, please use Global EM060K-GL M.2 modules  instead.

    Key Benefits

    ●  LTE-A Cat 6 module with M.2 form factor, optimized for M2M and IoT applications
    ●  Support LTE-A carrier aggregation
    ●  Worldwide LTE-A and UMTS/HSPA(+) coverage
    ●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    ●  Feature refinements: supports DFOTA and DTMF
    ●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

    Can work well in our Wodaplug LTE routers !!

    Learn More
  4. EM06-E EM06ELA-512-SGAD Quectel LTE-A M.2 - optimized 3GPP Rel. 11 LTE 2xCA Cat 6 Module , 5G+ ready, version Europe

    $69.90

    LTE-A EM06-E (Europe / EMEA / Brazil version) - END OF LIFE - out of production, please use EM060K Global module instead - last few modules available for delivery in 2 weeks lead time

    Quectel EM06 is a series of LTE Advanced category 6 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 11 LTE technology, it delivers maximum data rates up to 300Mbps downlink and 50Mbps uplink.
    This version will be EOL, please use EM060K-GL M.2 modules  instead (GLOBAL)

    Key Benefits

    ●  LTE-A Cat 6 module with M.2 form factor, optimized for M2M and IoT applications
    ●  Support LTE-A carrier aggregation
    ●  Worldwide LTE-A and UMTS/HSPA(+) coverage
    ●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    ●  Feature refinements: supports DFOTA and DTMF
    ●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

    Can work perfectly with our Wodaplug LTE routers !!

    Learn More
  5. EM12-G EM12GPA-512-SGAD Quectel LTE-A M.2 - optimized LTE advanced 3 x CA Cat 12 Module ( global ), 5G+ ready

    $89.00

    Special Price $79.99

    Quectel EM12-G is LTE Advanced category 12 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 600Mbps downlink and 150Mbps uplink peak data rates. De-signed in the M.2 form factor, EM12 is compatible with Quectel Cat6 module EM06 and future Cat 16 module EM16, which will facilitate customers to migrate between different categories. SDX20 chipset

    Special price now - new, not used modules, original packing !

    Key Benefits

    ●  LTE-A Cat 12 module with M.2 form factor, optimized for eMBB and IoT applications
    ●  Support DL 3x carrier aggregation and 256QAM
    ●  Worldwide LTE-A and UMTS/HSPA+ coverage
    ●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    ●  Feature refinements: supports DFOTA and VoLTE
    ●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

    Learn More
  6. Quectel EP06 miniPCIe - optimized LTE Cat 6 Module ver EP06-A (America), LTE-A ready

    $59.90

    Variant for America : EP06-A

    LTE-A CAT6 support ! END OF LIFE, SALE PRICE FOR LAST ONE MODULE. We recommend to use EM060K-GL module with adapter to miniPCIE - we can deliver it assembled for the same price.


    LTE FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/
    B29/B30/B66
    LTE TDD: B41
    2×CA: B2+B2/B5/B12/B13/B17/B26/B29;
    B4+B4/B5/B12/B13/B17/B26/B29;
    B25+B5/B12/B13/B17/B25/B26/B29;
    B30+B5/B12/B17/B26/B29; B41+B41
    (Note: B29 is only for secondary
    component carrier)
    WCDMA: B2/B4/B5

    Data
    LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
    LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
    DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
    (UL)
    UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
    TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
    (UL)

    LTE-A Cat.6 module with Mini PCIe form factor, optimized for
    M2M and IoT applications
    Support LTE-A carrier aggregation
    Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
    Multi-constellation GNSS receiver available for applications requiring
    fast and accurate fixes in any environment
    Feature refinements: supports DFOTA*, eCall* and DTMF
    MIMO technology meets demands for data rate and link reliability
    in modem wireless communication systems

    Notice for SPRINT users : sprint is very special, currently, only sierra wireless LTE modem  support it well. Quectel EP06A updated the new datasheet , they delete the band41 from it's support list, so EP06 not support sprint fully.

    Learn More
  7. Quectel EP06 miniPCIe - optimized LTE Cat 6 Module ver EP06-E version for EU, AU, BR , LTE-A (5G GSM) ready

    Variant for EMEA/Australia/Brazil : EP06-ELA-512-SGA

    LTE-A ready !! EP06-E PCIE has stop production as old version. But we still have 350pcs EP06-E PCIE in stock now !!


    LTE FDD: B1/B3/B5/B7/B8/B20/B28
    LTE TDD: B38/B40/B41
    2×CA: B1+B1/B5/B8/B20/B28;
    B3+B3/B5/B7/B8/B20/B28;
    B7+B5/B7/B8/B20/B28;
    B38+B38; B40+B40; B41+B41
    WCDMA: B1/B3/B5/B8

    Data
    LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
    LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
    DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
    (UL)
    UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
    TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
    (UL)

    LTE-A Cat.6 module with Mini PCIe form factor, optimized for
    M2M and IoT applications
    Support LTE-A carrier aggregation
    Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
    Multi-constellation GNSS receiver available for applications requiring
    fast and accurate fixes in any environment
    Feature refinements: supports DFOTA*, eCall* and DTMF
    MIMO technology meets demands for data rate and link reliability
    in modem wireless communication systems

    Learn More
  8. Quectel EC25 miniPCIe - optimized LTE Cat 4 Module ver EC25-A North America

    $51.99

     EOL - please use newer EC25-AF version 

    EC25-A: LTE FDD: B2/B4/B12 WCDMA: B2/B4/B5

    LTE Version 3GPP E-UTRA

    Release 11 Bandwidth: 1.4/3/5/10/15/20MHz

     Typ. 3GPP TS27.007 and Enhanced AT Commands

    Quectel EC25 is a series of LTE category 4 module optimized
    specially for M2M and IoT applications. Adopting the 3GPP
    Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
    50Mbit/s uplink data rates. Designed in the compact and unified
    form factor, EC25 is compatible with Quectel UMTS/
    HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
    which allows for flexible migration among them in design
    and manufacturing.
    EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
    AU, EC25-AUT and EC25-E. This makes it backwardcompatible
    with existing EDGE and GSM/GPRS networks,
    ensuring that it can be connected even in remote areas devoid
    of 4G or 3G coverage.
    EC25 supports Qualcomm® IZat™ location technology Gen8C
    Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
    GNSS greatly simplifies product design, and provides
    quicker, more accurate and more dependable positioning.
    A rich set of Internet protocols, industry-standard interfaces
    and abundant functionalities (USB drivers for Windows XP,
    Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
    Linux, Android/eCall*) extend the applicability of the module to
    a wide range of M2M and IoT applications such as industrial
    router, industrial PDA, rugged tablet PC, video surveillance,
    and digital signage.

    Learn More

    Out of stock

  9. Quectel EC25 miniPCIe - optimized LTE Cat 4 Module EC25-E EUROPE EMEA version

    $42.00

    Special Price $39.00

    EC25-E FA PCIE - LTE FDD: B1/B3/B5/B7/B8/B20
    LTE TDD: B38/B40/B41
    WCDMA: B1/B5/B8
    GSM: B3/B8

    LTE Version 3GPP E-UTRA Release 11

    Quectel EC25 is a series of LTE category 4 module optimized
    specially for M2M and IoT applications. Adopting the 3GPP
    Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
    50Mbit/s uplink data rates. Designed in the compact and unified
    form factor, EC25 is compatible with Quectel UMTS/
    HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
    which allows for flexible migration among them in design
    and manufacturing.
    EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
    AU, EC25-AUT and EC25-E. This makes it backwardcompatible
    with existing EDGE and GSM/GPRS networks,
    ensuring that it can be connected even in remote areas devoid
    of 4G or 3G coverage.
    EC25 supports Qualcomm® IZat™ location technology Gen8C
    Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
    GNSS greatly simplifies product design, and provides
    quicker, more accurate and more dependable positioning.
    A rich set of Internet protocols, industry-standard interfaces
    and abundant functionalities (USB drivers for Windows XP,
    Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
    Linux, Android/eCall*) extend the applicability of the module to
    a wide range of M2M and IoT applications such as industrial
    router, industrial PDA, rugged tablet PC, video surveillance,
    and digital signage.

    Learn More
Relevance
Set Ascending Direction

Grid List

15 per page

9 Item(s)