• Chipset: Qualcomm Atheros QCN9074
• Antenna: 4 x IPEX connectors, 4T4R
• Form Factor: Mini PCIe
• Interface: PCIe
• Support: Linux (Open Source) , Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Linux 5.9 FW Download Path - amss.bin + board.bin + m3.bin ( /lib/firmware/ath11k/QCN9074/hw1.0/)

Learn More

Key benefits

• Qualcomm Atheros QCN6024/9024 Pine series chipset

• 2,4GHz, 4x4 MU-MIMO OFDMA up to 1376Mbps PHY rate

• 5GHz, 4x4 MU-MIMO OFDMA up to 4804Mbps PHY rate

• Dual band selectable Wifi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

- lead time is 2-3weeks, samples available

Learn More

Key benefits • Qualcomm Atheros QCN6023/6024/9024 Pine series chipset • 2,4GHz, 3x3 MU-MIMO OFDMA up to 1032Mbps PHY rate • 5GHz, 3x3 MU-MIMO OFDMA up to 3603Mbps PHY rate • Dual band selectable Wifi 6 (802.11ax) • mPCIe interface with PCIe 3.0 • Heat sink allows free air operation • Designed for High Bandwidth Enterprise Wireless Access Points Learn More

Key benefits

• Qualcomm Atheros QCN6023/6024/9024 Pine series chipset

• 2,4GHz, 2x2 MU-MIMO OFDMA up to 573Mbps PHY rate

• 5GHz, 2x2 MU-MIMO OFDMA up to 2402Mbps PHY rate

• Dual band selectable Wifi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

Samples available for order with 2 weeks lead time - the only available part no is WLE3002HX 7A0624S

Learn More

Key benefits

• Qualcomm Atheros QCN9024 chipset

• 5Ghz, 4x4 MU-MIMO OFDMA technology, up to 4804Mbps PHY rate

• Single band 5Ghz 4x4 Wi-fi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

Available for orders - lead time is 2-3 weeks, par no WLE3000H5 7A0924S Learn More

Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.

The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G version 7 now includes:

• 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) . 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
• Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Learn More

USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

• Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
• Introduce integrated aluminum heat sink，make your 5G modem always cool.
• Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
• 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
• Adjust output to 3.7V. Prevent voltage drop when high data transfer .
• Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
• Use Nano SIM card slot , support hot swap simcard.
• ESD prtection at USB and SIM slot.
• Better performance, because of fast thermal module

Learn More

Quectel RM505Q-AE is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel-15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM505Q-AE is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 modules EM12-G/EM120R-GL/EM121R-GL, and Cat 16 module EM160RGL, which facilitates customers’ migration from LTE-A to 5G.

Led time is 2-3weeks now

• - 5G sub-6GHz module
• - 52.0mm × 30.0mm × 2.3mm
• - 8.7g
• - M.2 form factor
• - Max. downlink 2.5Gbps / 650Mbps uplink
• - Extended temperature range of -40°C to +85°C

Learn More

EG25GGB-MINIPCIE-S is LTE category 4 module optimized for broadband IoT applications Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage Standard PCI Express® Mini Card form factor (Mini PCIe) ideal for manufacturers to easily integrate wireless connectivity into their devices MIMO technology meets demands for data rate and link reliability in modem wireless communication systems Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment

This version have nano SIM slot ( holder ) on board and lead time is 1-2 weeks, version is EG25GGBR07A08M2G_30.202.30.202

Frequency Bands

EG25-G Mini PCIe: LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B8
Data
LTE:
LTE-FDD: Max 150Mbps (DL)/Max 50Mbps (UL) LTE-TDD: Max 130Mbps (DL)/Max 30Mbps (UL)
UMTS:
DC-HSDPA: Max 42Mbps (DL) HSUPA: Max 5.76Mbps (UL) WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
GSM:
EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL) GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL)

Learn More

The RM502Q-AE is a 5G sub-6GHz M.2 module measuring 52.0mm × 30.0mm × 2.3mm which supports both standalone (SA) and non-standalone (NSA) modes, as well as LTE Cat 20. The module achieves maximum downlink rates of 2Gbps and uplink rates of 450Mbps under SA mode and maximum downlink rates of 5Gbps and uplink rates of 650Mbps under NSA mode. The RM502Q-AE is intended to meet the demand for high speed, eMBB, and low latency of customers anywhere in the world outside China. The module supports multiple-input multiple-output (MIMO) technology which greatly reduces errors and optimizes data speed, and optionally features integrated GNSS (GPS/GLONASS/BeiDou/Galileo) for rapid and precise positioning. It is suitable for a wide range of applications including industrial routers, industrial PDAs, rugged tablet PCs and digital signage.

Version is RM502QAEAA-M20-SGASA   - USB is turned on by default 

- To run this module in our H721 router you need to switch modem data_interface to USB mode,  

* Chipset: Qualcomm Snapdragon X55 5G modem

* Cover global 5G frequency bands - Global version expect China , recommended for Europe, US and Canada

* Multi-gigabit data rates, up to 5.0Gbps

* DL 4 × 4 MIMO for 5G NR and LTE-A bands

* Multi-constellation GNSS capabilities

* Abundant interfaces: USB 3.0/3.1, PCIe 3.0 and eSIM

Learn More

5G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA - Global version expect China , recommended for Europe, US and Canada

Learn More

WiFi 5 wave2 4T4R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7615NP1, DBDC 

Chipset: MTK MT7615N

Interface: Normal Gold Finger miniPCIE

AW7615-NP1 is a 11ac WiFi Mini PCIe standard full-size Module based on Mediatek MT7615 which supports 1.7 Gbps PHY rate and Dual Bands Dual Concurrents (DBDC).

It fully complies with IEEE802.11ac and IEEE802.11 a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7615 is designed to support standard based features in the areas of security,quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7615 supports concurrent dual-band operation at 5GHz and 2.4GHz band (DBDC, Dual-Band-Dual-Concurrent).

With the advent of 802.11ac, multi-user MIMO (MU-MIMO) is defined. MT7615 supports MU-MIMO with different configurations. An AP is able to use its antenna arrays to transmit multiple frames to different clients at the same time and over the same frequency spectrum.

 

Learn More

Sierra Wireless 5G Module

* 5G Category: 5G NR Sub-6
* 5G DL 4.5Gbps, UL 660Mbps
* Satellite Systems: Galileo, Glonass, GPS, Beidou (Bands: L1 and L5)
* Firmware: Secure boot, Pre-certified firmware
* Dual SIM single standby (DSSS) switches

Learn More

The AirPrime® EM9190 M.2 from Sierra Wireless is an Embedded 5G NR and LTE Cat-22 Module that supports Sub-6 GHz and mm-Wave bands. This device is a part of the Sierra EM Series that offers global 5G connectivity. It delivers up to 5.5 Gbps of downlink speed and up to 330 Mbps of uplink speed.

The EM9190 device is available in a 30 x 52 x 2.38 mm footprint. With automatic 4G and 3G fallback networks, and a built-in GNSS receiver, it can be used for a wide range of M2M and IoT applications such as industrial routers, home gateways, industrial and consumer laptops, rugged tablet PCs, video surveillance and digital signage.

CHIPSET - Qualcomm SDX55 , M.2 form factor

Available for orders - leadtime is one - two weeks, em9190 are all like new in perfect working conditoon, has a few scratches on surface, tested & upgrade to latest fw.

Learn More