Search results for 'Wodasign'
-
524WiFi WiFi 6 Pigtail RF MMCX /R to N female (2cm),20cm, dia1, RG316
$4.99WiFi pigtail cable RF MMCX / R to N female (2cm) 20cm, dia1.32 for miniPCIe WiFi cards and router boards with MMCX connectors.
ds Learn More -
C-DATA EOC Slave + 802.11n 2x2 MIMO WiFi , CD5204W-B65S-M410, 300Mbps, WiFi, 4*LAN, 2*F, WEB Management, 42/54 diplexer
$44.00C-DATA EOC Indoor Slave with WiFi router with wifi speed 300Mbps - CD5204W-B65S-R410, 300Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...
Description
CD5204W-B65S-R410 EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.
Two WiFi antennas - 802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.
Learn More -
Wodaplug 1000 EOC Slave, 7.5Mhz-86Mhz / AV2, 1000Mbps, DS78LE, Indoor, 2xF, 4xLAN 100Mb Coax internet
$39.901000M EOC Salve (AV2), indoor, 2*F connector, 4*LAN 10/100Mb
This new MSTAR 510CE chip Homeplug AV2 based EOC Slave can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with Wodaplug 1000 AV2 EOC Master.
1000M EOC Slave is the terminal device in this system, it offers 4 FE ports, build L2 Ethernet transmission channel in the cable network, to transmit internet signal, but not affect the original CATV signal at the same time.
It has the advantages of long transmission distance, good network adaptability and high bandwidth.
Interested in test reports and datasheets ? Please visit http://wifi5.eu/dls/wodaplug.com/EOC-master-slave/Wodaplug1000_EOC/Unit can be configured via low level MStar tool v2.8. and set to work with any other EOC Master or Slave units. User can also configure it as a mini Master unit for small home network up to 8 slave devices. After configuration update using MStar tool it can work as Master mini unit and communicate with more Slave units.Learn More -
Wodaplug ® 2801 1*XPON 1*GE ONU Dual mode EPON / GPON , HGU , SFU, WEB Management, Bridgin and Routing, Realtek chip, 1*10/100/1000Mbps
$26.00Our XPON 1GE ONU is specially designed to meet the needs of telecom operators for FTTO (office), FTTD (desktop),
Learn More
FTTH (home), SOHO broadband access, video surveillance, etc. The ONU is based on high-performance chip technology solutions, and
supports Layer 2/Layer 3 functions, providing data services for carrier-grade FTTH applications.
The ONT has high reliability and can be applied to a wide temperature environment; and has a powerful firewall function, which is easy to
manage and maintain. It can provide QoS guarantee for different services. The ONT complies with international technical standards such as
IEEE802.3ah and ITU-T G.984. -
Wodaplug EOC Slave+11n 2x2 MIMO WiFi EOC1121R4WL-R410, 600Mbps, WiFi, 4*LAN, 2*F, WEB Management
$52.00 As low as: $40.00Wodaplug EOC Indoor Slave with WiFi router with wifi speed 300Mbps - EOC1121R4WL-R410, 600Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...
Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.
Two WiFi antennas - 802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.
Learn More -
Wodaplug ® FD504G-X-R410 XPON ONU 4GE port, WEB Management, GPON / EPON auto detect
$37.00xPON ONU Wodaplug ® FD504G-X-R410 4GE port, with EPON / GPON autodetect
FD504G-X-R410 dual-mode ONU is one of the XPON optical network unit design to meet the requirement of the broadband access network.It apply in FTTH/FTTO to provide the data, video service based on the XPON network.
FD504G-X-R410 dual-mode ONU supports EPON and GPON two modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON or EPON adaptive access.
FD504G-X-R410have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. Itfully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.
SC/UPC single mode single fiber
GPON:FSAN G.984.2 standard, Class B+
EPON:1000BASE-PX20+ symmetric
GPON:2.488Gbps/1.244Gbps downstream/upstream
EPON:1.25Gbps downstream/upstream
Learn More -
Wodaplug DA181 broadband data passing thru Amplifier fot TV coax cable networks
$20.42Broadband Amplifier DA 181
Construction of data passing thru broadband amplifier DA181 is a result of our many years of experience in developing and producing components for TV cable distributions and technicians requirements engaged in professional installations of coaxial networks.
Learn More
The amplifier has excellent linearity and adaptation, large overload possibility and low noise. This allows operation in difficult conditions with large differences in levels between the signals or in CATVs with a large number of transmitted channels.
Amplifier gain is slightly increasing towards higher frequencies to compensate for the natural attenuation of passive components involved in splittings. -
Wodaplug data passing thru Diplex filter 6587i 1*F+2*IEC connectors, data 2-65MHz / TV (DVBT)
$9.90INDOOR DIPLEX FILTER DD 6587
to split DATA and TV signal on the beginning of coax network and to divide TV and DATA signal before end TV (very low loss -1dB and very high signal separation)
or to realise BY PASS of an existing aplifier in your coax network.
Attention - not use in SAT coax cable networks, SATELITE signal works on higher frueancy range, this solution is designed for TV / DVBT cabling network
high quality housing with 1*F + 2*IEC connectors
high isolation
low price
Learn More -
Wodaplug data passing thru Diplex filter 6587 3*F connectors, data 2-65MHz / TV (DVBT)
$9.90INDOOR DIPLEX FILTER DD 6587
to split DATA and TV signal on the beginning of coax network and to divide TV and DATA signal before end TV (very low loss -1dB and very high signal separation)
or to realise BY PASS of an existing aplifier in your coax network.
Attention - not use in SAT coax networks, SATELITE signal works on higher frueancy range, this solution is designed for TV / DVBT cabling network
high quality housing with 3* F connectors
high isolation
low price
Learn More -
Wodaplug ® PLC splitter 1 to 2 ABS BOX - with default connector type SC/PC
$9.00WDS PLC splitters 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,Diameter 2mm,Patch Cord 1Meter,small plastic housing Splitters 100% compatible with GE PON wodaplug networking products Learn More -
Wodaplug ® PLC splitter 1 to 4 ABS BOX - with default connector type SC/PC
$12.00WDS PLC splitters 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,Diameter 2mm,Patch Cord 1Meter,small plastic housing Splitters 100% compatible with GE PON wodaplug networking products Learn More -
Wodaplug ® PLC splitter 1 to 8 ABS BOX - with default connector type SC/PC
$14.00WDS PLC splitters 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,Diameter 2mm,Patch Cord 1Meter,small plastic housing Splitters 100% compatible with GE PON wodaplug networking products Learn More -
Wodaplug ® PLC splitter 1 to 16 ABS BOX - with default connector type SC/PC
$29.90WDS PLC splitters 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,Diameter 2mm,Patch Cord 1Meter,small plastic housing Splitters 100% compatible with GE PON wodaplug networking products Learn More -
Wodaplug ® PLC splitter 1 to 32 ABS BOX - with default connector type SC/PC
$25.00WDS PLC splitters 1/2-1/64.
Our splitters are equiped with default connector type: SC/PC !!!!
PLC Splitter,SC/PC,Diameter 2mm,Patch Cord 1Meter,small plastic housing Splitters 100% compatible with GE PON wodaplug networking products.
This PLC splitter is Build to to order only, lead time is usually 3-4 weeks.
Learn More -
Wodaplug ® WP 5441H-C(H)3AL GEPON OLT SFP Transceiver 1.25Gbps, 1000BASE-PX20+++, 7dBi, TC 3.0, IEEE802.3ah
$45.00GEPON OLT PON Module,Class C++, 7dBi, 20Km
WDS5441H-C(H)3AL is a high performance transceiver module for single fiber communications using a 1490nm continuous-mode transmitter and a 1310nm burst-mode receiver. It is designed to meet CTC 3.0 and IEEE802.3ah -2004 1000BASE- PX20+++ applications.
The transmitter has automatic power control (APC) function and temperature compensation circuitry to ensure stable optical power output and extinction ratio over all operating temperature range. The transmitter meets Class 1 eye safety per IEC825 and CDRH standards.
The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with LVPECL compatible differential outputs. It features a burst-mode Loss of signal (LOS) output which is LVTTL compatible. The receiver offers bust-mode RSSI outputs, which is I2C
accessible digitized data stored in the internal flash memory.
The module provides digital diagnostic information of its operating conditions and status, including transmitting power, laser bias current, module temperature, supply voltage, and burst-mode receiving power. Calibration and alarm/warning threshold data are written and stored in the internal memory (EEPROM). The memory map is compatible with SFF-8472.
Compatible with all Wodaplug OLT units and all other with this standard