Embedded Wireless Boards
11ax and 11ac ready Wireless CPU Embedded boards, Qualcomm Atheros based, PCBA, LEDE - OpenWRT supported (ath10k ath11k).
Dual radio solution for 11n + 11ac and new 11ax dual concurent 2,4GHz + 5GHz wifi 5 and wifi 6 !! Now we support 4G 5G LTE modules / LTE gateway or hotspot
-
Gigabit 802.3 af / at POE Injector, Active, 56V/60W, POE-G-AT60-EU, Compex
$49.00POEGAT60-EU - Active 802.3at Gigabit POE, 56V/450mA/25,4W Standard POE , works with all new BOARDS HV version. Recommended for WPQ864 boards.
IEEE 802.3at detection, power feeding by 4 pins
IEEE 802.3at detection, power feeding by 4 pins Learn More -
SALE - indoor 11bgn AP MMZ531HV, 2,4GHz, omni Pyramidal antenna, POE,
$59.00
Special Price $49.99
MMZ531HV
Indoor 2,4GHz 11bgn access point with OMNI Payramid antena and POE support 802.3af
MMZ531 is a high-performance indoor Access Point with integrated PoE. Using Qualcomm Atheros QCA9531 network processor of speed 650MHz , coupled with 802.11bgn wireless technology and 2x2 MIMO technique enable it to support high-speed data transmission of up to 300Mbps. DC Power 1x DC Jack Connector: 24-56V
Power Over Ethernet 1x IEEE 802.3at or Passive PoE input minimum 36V
Power Consumption 7 Watts (Max)
Learn More -
CPX MJE2.4N11 Outdoor Enclosure with 11dBi MIMO antenna 2,4GHz
$25.00
Special Price $19.00
Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Learn More
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount -
COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563
$99.99WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot
Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac
- Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
- 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
- 128MB System Memory
- 16MB NOR Flash
- 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
- Supports Dynamic Frequency Selection (DFS)
- Single SIM Holder on-board
- Support 2 x Gigabit Ethernet Port
Applications :
• 802.11g/n + 802.11a/n/ac Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
Power solution :
DC Jack: 12-24V
PoE: IEEE 802.3af 48V,
IEEE 802.3at 56V,
or Passive PoE 36-56V DC
Learn More -
COMPEX Passive POE+ (injector + psu) 24V/1A 7P24V30WEU
$16.00
Special Price $12.00
Passive POE, 24V/1,2A/30W Standard POE , works with all COMPEX BOARDS. Recommended for dual radio slot boards like WP543HV and WP546HV Learn More -
CPX Pasive POE+ FE2405EU (injector) 24V/0,5A for LV series+
$9.90Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).
Work with WP54, wp543 and new LV series of router boards.
SALE !!!
Learn More -
CPX Gigabit Power over Ethernet (PoE) PoEGP2408 24V
$19.90
Special Price $15.00
COMPEX POE GP2408 24V/0,8A gigabit passive POE mainly for LV (low Voltage) router board versionsGigabit Power over Ethernet (PoE)Compex Gigabit Power over Ethernet Injector adapter (PoEGP2410) combines electrical power with a Gigabit network data signal to product a Gigabit Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100 meters (328 Ft.) to network most PoE devices. No need to buy a PoE switch—use existing open ports from a non-PoE switch to network PoE devices. This will save you a tremendous installation cost in terms of time, material and labor. This compact device keeps the Ethernet device fully protected against any circuit shortage caused by wrong pin assignment or cable damage with short circuit protectionLearn More