Embedded Wireless Boards
11ax and 11ac ready Wireless CPU Embedded boards, Qualcomm Atheros based, PCBA, LEDE - OpenWRT supported (ath10k ath11k).
Dual radio solution for 11n + 11ac and new 11ax dual concurent 2,4GHz + 5GHz wifi 5 and wifi 6 !! Now we support 4G 5G LTE modules / LTE gateway or hotspot
-
power supply 24V/0,5A for WP54/WP543/WPJ344/72 6E,7A version and more boards
$5.90
Special Price $3.00
power supply 24V,0,5A for Low Voltage (LV) devices and router boards Learn More -
indoor plastic BOX for WP54/543 router board (no antenna), compex
$5.00
Special Price $3.00
indoor plastic BOX for WP54/WP543 router board + walmount kit + screws. not for wpj344 Learn More -
524 WiFi ROD omni dual band antenna, 5dBi, RSMA male, 2.4 + 5 GHz (dual band), tuned
$6.99Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector.
Learn More -
CPX Pasive POE+ FE2405EU (injector) 24V/0,5A for LV series+
$9.90Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).
Work with WP54, wp543 and new LV series of router boards.
SALE !!!
Learn More -
Power Adapter 48V 0,8A for RouterBOARDs with power cord
$9.99power supply 48V, 0,8A for all HV version devices and boards Learn More -
WiFi 5 5N17 5GHZ 17dBi DUAL-POLARIZATION ANTENNA for 11ac wifi, 2*2 MIMO, COMPEX
$15.00
Special Price $12.00
COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl
- 5.1 ~ 5.9 GHz
- 17 dBi Dual-Polarization
- 2x U.FL
- -40dB Isolation
- Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)
-
COMPEX Passive POE+ (injector + psu) 24V/1A 7P24V30WEU
$16.00
Special Price $12.00
Passive POE, 24V/1,2A/30W Standard POE , works with all COMPEX BOARDS. Recommended for dual radio slot boards like WP543HV and WP546HV Learn More -
CPX Gigabit Power over Ethernet (PoE) PoEGP2408 24V
$19.90
Special Price $15.00
COMPEX POE GP2408 24V/0,8A gigabit passive POE mainly for LV (low Voltage) router board versionsGigabit Power over Ethernet (PoE)Compex Gigabit Power over Ethernet Injector adapter (PoEGP2410) combines electrical power with a Gigabit network data signal to product a Gigabit Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100 meters (328 Ft.) to network most PoE devices. No need to buy a PoE switch—use existing open ports from a non-PoE switch to network PoE devices. This will save you a tremendous installation cost in terms of time, material and labor. This compact device keeps the Ethernet device fully protected against any circuit shortage caused by wrong pin assignment or cable damage with short circuit protectionLearn More -
CPX MJE2.4N11 Outdoor Enclosure with 11dBi MIMO antenna 2,4GHz
$25.00
Special Price $19.00
Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Learn More
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount -
SALE - CPX WPE72-7A Board, AR 7240 chipset, 32/8MB, 1PCIe slot, 2*RJ45, POE
$29.00
Special Price $19.90
Atheros AR7240 400MHz Network Processor - SALE - last 4 pcs in stock
1 Mini PCIe slot
2 Ethenet ports
Supports all Compex Mini PCIe radio modules
Supports Compex, OpenWRT firmware
Integrated passive Power-over-Ethernet
Integrated PoE cascade arrangement
Optional Remote hardware reset
Learn More -
Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV versions boards)
$19.90Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)
Features:
Support 802.3AT/AT
The output voltage is 24V
The efficiency is 85%
Support surge protection
Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description : PD-25 is a 802.3at module,that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.
-
Dream 6102-5G 524WiFi WiFi6 802.11ax 2x2 MU-MIMO 5GHz QCN 6102 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$22.00DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module
Works only with DR518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6102 5GHz, max 23dBm per chain, up to 2402Mbps Single Band 5 GHz 2x2 WiFi 6E 802.11ax 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More -
TP-LINK 802.3af POE TL-POE150S adapter + psu 48V/15W
$24.90PoE Splitter Adapter, IEEE 802.3af compliant, Data and power carried over the same cable up to 100 meters, plastic case, pocket size, plug and play. Suitable for WPJ344/558 HV based devices Learn More -
Turris WiFi 2.4 / 5GHz Antenna Diplexer with LTE Coexistence Filter (Dual Band)
$24.99Turris Diplexer with LTE Coexistence Filter
It combines the 2.4GHz/5GHz signals to one single dual-band antenna with or without an LTE coexistence filter. Instead of using 8x Antennas for both WiFi radio, you may now reduce the antenna to 4 by using our diplexer to connect both 2.4GHz and 5GHz radios together. LTE coexistence option is with High Rejection in LTE bands.Learn More
Specifications:- 1x1 2.4GHz/5GHz U.FL Connector
- 1x1 2.4GHz/5GHz SMA Connector, no cable sincluded in
- 2412MHz~2472MHz, 4900MHz~5950MHz
- 50 Ω for Impedance
-
DR5G17 17dBi Dual Polarized Micro strip Antenna Array 5GHz MMCX connector 802.3 11AX/AC/AN RoHS compliance, Wallys
$27.001. Feature * 17dBi Dual Polarized Micro strip Antenna Array * 5GHz of frequency * MMCX connector * Support 802.3 11AX/AC/AN * RoHS compliance 2. Application * 5GHz Wireless Communication * WLAN device, WLAN Router, e.g., AP, PIC Wireless Card 3. Description This antenna array is designed for 5GHz applications and can be easily built-in portable devices with MHF processes. It has excellent stability and sensitivity to consistently provide high signal reception efficiency. Learn More