Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

JTAG Programmer, for all COMPEX boards WPj558 / WPJ531 / WPJ 344 / WP543 / WPE72 / WP546 / WP54 / WPP54 / WP18 / NP18. Jtag Programmer can be used to load in your loader and firmware.

Serial Converter, for all COMPEX boards - WPJ558/ WPJ531/ WPJ344/ WP543 / WPE72 / WP54 / WPP54 / WP18 / NP18 . Serial Converter can be used to debug the serial output messages.

WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot

Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now

775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac

• Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
• 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
• 128MB System Memory
• 16MB NOR Flash
• 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
• Supports Dynamic Frequency Selection (DFS)
• Single SIM Holder on-board
• Support 2 x Gigabit Ethernet Port

Applications : 

• 802.11g/n + 802.11a/n/ac Access Point

• Point-to-MultiPoint High Capacity Wireless Bridge

• Wireless Customer-Premises Equipment (CPE)

WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.

Power solution :

DC Jack: 12-24V

PoE: IEEE 802.3af 48V,

IEEE 802.3at 56V,

or Passive PoE 36-56V DC

Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount

Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).

Work with WP54, wp543 and new LV series of router boards.

SALE !!!

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Indoor enclosure with Onmi Antennas

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■  Support Wallys’ PCBA Mainboar DR4029, DR4028

Outdoor box with WiFi Antennas 

■  2 x5G Antenna directional

■  PCB Antenna

■ 16dBi max gain

■  DRA25  2,4GHz omni antennas are optional to connect using N-type pigtails (not included in - optional)

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports

Samples are available now! OpenWiFi and OpenWRT firmware supported.

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Dual-core ARM 64bit A53@1.0GHz Processor

1G DDRL3L System Memory

8MB NOR Flash, 256MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

M.2 Card Slot for QCN9074 WIFI 6E Card

M.2 Card Slot for QCN6122-6E Card

M.2 Card Slot for QCN6102-5GCard

Support Openwifi

DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card. 

DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

Samples are available now!

 11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

Features:

Dual-core ARM 64bit A53@1.0GHz Processor

512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

Support BT5.1

M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

POE 802.3 bt，at，af support

Support Openwifi

Product Description

DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module

Works only with DR518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6102  5GHz, max 23dBm per chain, up to 2402Mbps  Single Band 5 GHz 2x2 WiFi 6E 802.11ax  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module

Works only with IPQ Dream 518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6122  6GHz, max 23dBm per chain, up to 2402Mbps  Single Band 6GHz 2x2 WiFi 6E (802.11ax)  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

OVERVIEW

The POE33024PF is a full gigabit unmanaged PoE fiber switch. It has 24*10/100/1000M RJ45 ports and 2*1000M SFP slot ports. Port 1-24 can support IEEE802.3af/at standard PoE power supply. single port PoE power reaches 30W, and the maximum PoE output power is 400W(at-600W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, visual intelligent building intercom through network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprises. Unmanaged model, plug and play, no configuration, easy to use.

FEATURE

Full gigabit access, gigabit SFP port uplink

All series support "gigabit Ethernet port and gigabit SFP fiber port " combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Support non-blocking wire-speed forwarding.

Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

Intelligent PoE power supply

24*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.

IEEE 802.3af/at PoE standard, without damaging non-PoE devices.

Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

Stable and reliable

Low power consumption, galvanized steel casing. The Fan active cooling.

Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

CCC,CE, FCC, RoHS ◇ Plug and play, no configuration, simple and convenient.

The user-friendly panel, it can show the device status through the LED indicator of PWR, Link ,PoE.

Product description

PSAT-5-4P is 5 port 10/100Mbps unmanaged switch with 4 PoE ports. Switch automatically detecting and powering 802.3af/at (up to 30W/port) devices on 1 - 4 ports. 5th port is normal ethernet ports without PoE functionality as uplink port. Total PoE budget for devices is 96W with external power adapter 48V/2A, which is included the package.

With this switch you can power wide range of IP cameras, VoIP telephones, WiFi AP and other devices supporting 802.3af/at PoE standard.

Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721O 5G NR outdoor version now includes:

• outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

Hardware: 

MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

1x M.2 b.key USB 3.0 as 5Gnr interface,

1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

Lightning protection design

 Heat sink at botoon of 5Gnr modem

NEW X-WRT firmware available !!!

Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.

The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G version 7 now includes:

• 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) . 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
• Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Non-standard; Gigabit ；Max 30 W

Power out Pin: Mode B; Pin 4,5 (+)/7,8(-)

Input:100-240V/AC;50/60Hz

Output:DC48-56V

Caution: Indoor use only.

IEEE 802.3at；Gigabit ；Max 30 W Power out Pin: Mode -A; Pin 1,2 (+)/3,6(-) Input:100-240V/AC;50/60Hz Output:DC48-56V Caution: Indoor use only.