Embedded Wireless Boards
11ax and 11ac ready Wireless CPU Embedded boards, Qualcomm Atheros based, PCBA, LEDE - OpenWRT supported (ath10k ath11k).
Dual radio solution for 11n + 11ac and new 11ax dual concurent 2,4GHz + 5GHz wifi 5 and wifi 6 !! Now we support 4G 5G LTE modules / LTE gateway or hotspot
-
Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV versions boards)
$19.90Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)
Features:
Support 802.3AT/AT
The output voltage is 24V
The efficiency is 85%
Support surge protection
Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description : PD-25 is a 802.3at moduleļ¼that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.
Learn More
-
SALE - WPJ428 Multi-function IPQ4028 Embedded Board, 710MHz CPU / 2x GE Port / Dual Band 802.11ac Wave 2, LTE Gateway
$99.90WPJ428HV - 2.4GHz & 5GHz 2×2 802.11ac Wave 2 MU-MIMO Wireless Embedded Board with M.2 Slot
Learn More- Next Gen IPQ4028 ARM v7 CPU, 710MHz CPU
- On-board Dual Band 2×2 802.11ac Wave 2 300Mbps @ 802.11n + 867Mbps @ 802.11ac
- 802.11ac Wave 2
- Integrated IEEE 802.3af/at
- Support 2 x Gigabit Ethernet Port
- 1x NGFF (M.2) Slot
- 802.11ac Wave 2 LTE Gateway - WPJ428 board only provide M2 slot for 3G/4G module, LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
- samples available ! for compatible LTE modules check our LTE modules category !
- Can support Quectel EM12-G 4G LTE module now !!! Same as EC25, EP06 or EM7455 modules
-
QCA 9531 WPJ531HV-A Dual Radio Embedded Board ,16/64MB, on board 2.4GHz radio, 11n/11ac ready
$49.90Compex WPJ531HV-A Dual Radio Embedded Board gen3
WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available.
DC Power 1x DC Jack Connector: 24-56V
Power Over Ethernet 1x IEEE 802.3at or Passive PoE input minimum 36V
Power Consumption 7 Watts (Max)
SIM bay on board! Learn More
-
Gigabit 802.3 af / at POE Injector, Active, 56V/60W, POE-G-AT60-EU, Compex
$49.00POEGAT60-EU - Active 802.3at Gigabit POE, 56V/450mA/25,4W Standard POE , works with all new BOARDS HV version. Recommended for WPQ864 boards.
IEEE 802.3at detection, power feeding by 4 pins
IEEE 802.3at detection, power feeding by 4 pins Learn More
-
Wallys QCA DR 6018 v4 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, CP01
$115.00Learn MoreMulti-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA
Samples are available, higher quantity manufactured upon request with quick lead time. OpenWiFi and OpenWRT supported !
CP01 - c4 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
- Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
- 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
- 256MB NAND Flash
- 32MB NOR Flash
- M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
- 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
- 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
- 1x 2.5Gbps Ethernet port
- 5x 1Gbps Ethernet ports
- 1x USB 2.0 Port
APPLICATIONS
QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!
• 802.11ax MU-MIMO OFDMA Access Point • Mesh router supporting EasyMesh • Smart AP TWT • Can support OpenWIFI firmware
This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc
- Wireless modules QCA & MTK based
2,4 / 5GHz 802.11 ac ax be and latest WiFi 5, 6, 6E, 7 / 5G NR 4G Cellular LTE miniPCIe / M.2 modules and accessories
- 11ac/ax Wireless Embedded Boards
QCA IPQ Atheros CPU, gigabit ready, WiFi 5, 6, 7 onboard, 5G NR 4G LTE gateway hotspot mesh OpenWRT OpenWIFI
- QUECTEL best 4G LTE 5G NR modules
We offer most popular 4G LTE 5G NR cellular modem modules from Quectel and others. Wodaplug offers Ether over coax cable EOC and EPON XPON passive optical network products.
You have no items to compare.
From Twitter
Why to shop here
- Selling online over 21 years since 2003
- Unbeatable prices and services
- Fastest delivery & lowest shipping prices
- Winner of Best AFD-AT, Product of thre year
- Custom solutions for unusual settinngs
- Firmware requests and other solutions
-
$10 000 insurance per deal
